. "${srcdir}/test/post/test-post-common.sh"
+# Find MIME type string, using mimetypeproc if configured with it.
+MIMETYPEPROC=`mhparam mimetypeproc`
+content_type_string() {
+echo $MIMETYPEPROC; $MIMETYPEPROC $1 # temporary, for debugging on OpenBSD
+ls -l dead.letter; /bin/rm -f dead.letter # temporary, for debugging on OpenBSD
+
+ if test -z "$MIMETYPEPROC"; then
+ echo "text/plain; name=\"`basename $1`\"; charset=\"us-ascii\""
+ else
+ # 1) Excise leading filename followed by : and any whitespace.
+ # 2) Wrap charset value in double quotes. Assume that it isn't already.
+ printf "%s %s%s" \
+ `$MIMETYPEPROC $1 | sed -e 's/.*: *//' -e 's/\(charset=\)\(.*\)/\1"\2"/'`\
+ "; name=\"`basename $1`\""
+ fi
+}
+
# Customize test_post () for use with mhmail.
# $1 is expected output file, provided by caller
# $2 is mhmail switches, except for -body
# $4 contains the message body.
test_mhmail ()
{
- "${MH_OBJ_DIR}/test/fakesmtp" "$actual" $localport &
- pid="$!"
-
- # The server doesn't always come up fast enough, so sleep and
- # retry a few times if it fails...
- status=1
- for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20; do
- if [ $3 = '|' ]; then
- if printf '%s' "$4" | mhmail recipient@example.com $2 \
- -server 127.0.0.1 -port $localport; then
- status=0
- break
- fi
- else
- if mhmail recipient@example.com $2 -body "$4" \
- -server 127.0.0.1 -port $localport; then
- status=0
- break
- fi
- fi
- sleep 2
- done
- if [ $status -ne 0 ]; then
- printf '%s: mhmail failed, was fakesmtp given enough time to start?\n' \
- "$0" >&2
- exit 1
+ pid=`"${MH_OBJ_DIR}/test/fakesmtp" "$actual" $localport`
+
+ if [ $3 = '|' ]; then
+ printf '%s' "$4" | mhmail recipient@example.com $2 \
+ -server 127.0.0.1 -port $localport
+ else
+ mhmail recipient@example.com $2 -body "$4" \
+ -server 127.0.0.1 -port $localport
fi
- wait ${pid}
-
#
# It's hard to calculate the exact Date: header post is going to
# use, so we'll just use sed to remove the actual date so we can easily
# check -nosend
# Not supported by compiled mhmail.
-mhmail -nosend recipient@example.com -from sender@localhost \
+mhmail -nosend recipient@example.com -from sender1@localhost \
-server 127.0.0.1 -port $localport -body '' >"$actual" 2>"$actual_err"
-tmpfil=`head -1 $actual | sed -e 's/://'`
-
cat > "$expected" <<EOF
To: recipient@example.com
-From: sender@localhost
+From: sender1@localhost
EOF
# Not supported by compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender2@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender2@localhost
Date:
message
QUIT
EOF
-test_mhmail "$expected" "-from sender@localhost -nosend -send" '|' message
+test_mhmail "$expected" "-from sender2@localhost -nosend -send" '|' message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender3@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender3@localhost
Date:
message
QUIT
EOF
-test_mhmail "$expected" "-from sender@localhost" '|' message
+test_mhmail "$expected" "-from sender3@localhost" '|' message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender4@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender4@localhost
Date:
body
QUIT
EOF
-test_mhmail "$expected" "-from sender@localhost" -b body
+test_mhmail "$expected" "-from sender4@localhost" -b body
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender5@localhost>
RCPT TO:<recipient@example.com>
RCPT TO:<recipient2@example.com>
DATA
To: recipient@example.com
Cc: recipient2@example.com
-From: sender@localhost
+From: sender5@localhost
Date:
message
EOF
test_mhmail "$expected" \
- "-from sender@localhost -cc recipient2@example.com" '|' message
+ "-from sender5@localhost -cc recipient2@example.com" '|' message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender6@localhost>
RCPT TO:<recipient@example.com>
RCPT TO:<recipient2@example.com>
RCPT TO:<recipient3@example.com>
To: recipient@example.com
Cc: recipient2@example.com, recipient3@example.com,
recipient4@example.com
-From: sender@localhost
+From: sender6@localhost
Date:
message
EOF
test_mhmail "$expected" \
- '-from sender@localhost -cc recipient2@example.com recipient3@example.com '\
-'recipient4@example.com' '|' message
+ '-from sender6@localhost -cc recipient2@example.com '\
+'recipient3@example.com recipient4@example.com' '|' message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender7@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
Subject: Test
-From: sender@localhost
+From: sender7@localhost
Date:
message
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost -subject Test' '|' message
+test_mhmail "$expected" '-from sender7@localhost -subject Test' '|' message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender8@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender8@localhost
Date:
Message-ID:
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost -profile' '|' message
+test_mhmail "$expected" '-from sender8@localhost -profile' '|' message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender2@localhost>
+MAIL FROM:<sender9@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
Subject: Subject2
-From: sender2@localhost
+From: sender9@localhost
Date:
message
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost -from sender2@localhost '\
+test_mhmail "$expected" '-from sender9@localhost -from sender9@localhost '\
'-subject Subject1 -subject Subject2' -b message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender10@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender10@localhost
Date:
body2
QUIT
EOF
-test_mhmail "$expected" "-from sender@localhost -body body1" -b body2
+test_mhmail "$expected" "-from sender10@localhost -body body1" -b body2
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender11@localhost>
RCPT TO:<recipient@example.com>
RCPT TO:<cc1@example.com>
RCPT TO:<cc2@example.com>
DATA
To: recipient@example.com
Cc: cc1@example.com, cc2@example.com
-From: sender@localhost
+From: sender11@localhost
Date:
message
EOF
test_mhmail "$expected" \
- '-from sender@localhost -cc cc1@example.com -cc cc2@example.com' -b message
+ '-from sender11@localhost -cc cc1@example.com -cc cc2@example.com' -b message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender12@localhost>
RCPT TO:<recipient@example.com>
RCPT TO:<cc1@example.com>
RCPT TO:<cc2@example.com>
To: recipient@example.com
Cc: cc1@example.com, cc2@example.com
Subject: Test
-From: sender@localhost
+From: sender12@localhost
Date:
message
EOF
test_mhmail "$expected" \
- '-from sender@localhost -cc cc1@example.com -subject Test cc2@example.com' \
- -b message
+ '-from sender12@localhost -cc cc1@example.com -subject '\
+'Test cc2@example.com' -b message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender13@localhost>
RCPT TO:<recipient@example.com>
RCPT TO:<recipient2@example.com>
RCPT TO:<cc1@example.com>
To: recipient@example.com, recipient2@example.com
Cc: cc1@example.com
Subject: Test
-From: sender@localhost
+From: sender13@localhost
Date:
message
EOF
test_mhmail "$expected" \
- "-from sender@localhost -cc cc1@example.com -subject Test \
+ "-from sender13@localhost -cc cc1@example.com -subject Test \
-to recipient2@example.com" \
-b message
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender14@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender14@localhost
Date:
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' '|' '
+test_mhmail "$expected" '-from sender14@localhost' '|' '
'
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender15@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender15@localhost
Date:
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' '|' '
+test_mhmail "$expected" '-from sender15@localhost' '|' '
'
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender16@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender16@localhost
Date:
no newline in input
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' '|' 'no newline in input'
+test_mhmail "$expected" '-from sender16@localhost' '|' 'no newline in input'
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender17@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender17@localhost
Date:
here's some text
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' '|' "here's some text
+test_mhmail "$expected" '-from sender17@localhost' '|' "here's some text
"
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender18@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender18@localhost
Date:
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' -b ''
+test_mhmail "$expected" '-from sender18@localhost' -b ''
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Shows different behavior than compiled mhmail, which suppressed the newline.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender19@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender19@localhost
Date:
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' -b '
+test_mhmail "$expected" '-from sender19@localhost' -b '
'
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# of the newlines.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender20@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender20@localhost
Date:
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' -b '
+test_mhmail "$expected" '-from sender20@localhost' -b '
'
# Verified same behavior as compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender21@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender21@localhost
Date:
no newline in input
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' -b 'no newline in input'
+test_mhmail "$expected" '-from sender21@localhost' -b 'no newline in input'
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# of the newlines.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@localhost>
+MAIL FROM:<sender22@localhost>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender22@localhost
Date:
here's some text
QUIT
EOF
-test_mhmail "$expected" '-from sender@localhost' -b "here's some text
+test_mhmail "$expected" '-from sender22@localhost' -b "here's some text
"
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
Resent-To: recipient@example.com
Resent-From: orig_recipient@example.com
To: recipient@example.com
-From: sender@localhost
+From: sender23@localhost
Date:
Resent-Date:
test_mhmail "$expected" '-from orig_recipient@example.com -resent' \
-b 'To: recipient@example.com
-From: sender@localhost
+From: sender23@localhost
Date: Sat Jun 16 18:35:15 -0500
please resend this message, 1'
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender24@localhost
Date:
Resent-To: recipient@example.com
Resent-From: orig_recipient@example.com
test_mhmail "$expected" \
'-from orig_recipient@example.com -resent -profile -nomsgid' \
'|' 'To: recipient@example.com
-From: sender@localhost
+From: sender24@localhost
Date: Sat Jun 16 18:35:15 -0500
please resend this message, 2'
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@localhost
+From: sender25@localhost
Date:
Resent-To: recipient@example.com
Resent-From: orig_recipient@example.com
test_mhmail "$expected" \
'-from orig_recipient@example.com -resent -profile -nomsgid' \
-b 'To: recipient@example.com
-From: sender@localhost
+From: sender25@localhost
Date: Sat Jun 16 18:35:15 -0500
please resend this message, 3'
# Not supported by compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@example.com>
+MAIL FROM:<sender26@example.com>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@example.com
+From: sender26@example.com
User-Agent: nmh
Date:
EOF
test_mhmail "$expected" \
- '-from sender@example.com -headerfield User-Agent:nmh' \
+ '-from sender26@example.com -headerfield User-Agent:nmh' \
-b 'with added header field'
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
# Not supported by compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@example.com>
+MAIL FROM:<sender27@example.com>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@example.com
+From: sender27@example.com
MIME-Version: 1.0
Content-Type: text/plain;charset=utf-8
Content-Transfer-Encoding: 8bit
EOF
test_mhmail "$expected" \
- "-from sender@example.com -headerfield MIME-Version:1.0 \
+ "-from sender27@example.com -headerfield MIME-Version:1.0 \
-headerfield Content-Type:text/plain;charset=utf-8 \
-headerfield Content-Transfer-Encoding:8bit" \
-b 'with added header fields'
# Not supported by compiled mhmail.
cat > "$expected" <<EOF
EHLO nosuchhost.example.com
-MAIL FROM:<sender@example.com>
+MAIL FROM:<sender28@example.com>
RCPT TO:<recipient@example.com>
DATA
To: recipient@example.com
-From: sender@example.com
+From: sender28@example.com
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
Date:
See how easy it is to add an attachment!
------- =_aaaaaaaaaa0
-Content-Type: text/plain; name="attachment.txt"; charset="us-ascii"
+Content-Type: `content_type_string ${srcdir}/test/mhmail/attachment.txt`
Content-Description: attachment.txt
Content-Disposition: attachment; filename="attachment.txt"
EOF
test_mhmail "$expected" \
- "-from sender@example.com -attach ${srcdir}/test/mhmail/attachment.txt" \
+ "-from sender28@example.com -attach ${srcdir}/test/mhmail/attachment.txt" \
-b 'See how easy it is to add an attachment!'
[ ${failed:-0} -eq 0 ] || exit ${failed:-0}
projects / nmh / blobdiff