# Configures and builds nmh.
# * This script must be invoked from an nmh source directory.
# * This script retrieves configuration from the first existing nmh
-# installation on your $PATH, if any, as well as any $EDITOR/$VISUAL
-# and $PAGER environment variable settings.
+# installation on your $PATH, if any.
# * Unless the -y option is provided, this script then interactively
# walks you through confirmation of common configuration settings.
#
# rpm-build, with -r
-####
-#### OS-specific setup.
-####
-which=which
-ldd=ldd
-
####
#### Interpret command arguments.
####
fi
#### Check to see that we're in a nmh source directory.
-if grep 'the authors of nmh' COPYRIGHT >/dev/null; then
- :
-else
+if ! grep 'the authors of nmh' COPYRIGHT >/dev/null; then
echo "$0: not in nmh source directory"
exit 1
fi
config_smtpservers=localhost
config_sasl=n
config_tls=n
-config_editor=vi
-for i in more less most cat; do
- if which $i >/dev/null 2>&1; then
- config_pager=$i
- break
- fi
-done
config_debug=n
+
+#### Find location of a program. Bourne shell just puts the name in
+#### $0 if it's found from the PATH, so search that if necessary.
+finddir() {
+ case $1 in
+ */*) dirname "$1" ;;
+ * ) IFS=:
+ for d in $PATH; do
+ [ -f "${d:=.}/$1" -a -x "$d/$1" ] && printf %s "$d" && break
+ done ;;
+ esac
+}
+
+#### Figure out whether or not to use -n with tail.
+case `printf 'OK\n' | tail -n 1 2>&1` in
+ OK) tail='tail -n ' ;;
+ *) tail='tail -' ;;
+esac
+
if install-mh -check >/dev/null 2>&1; then
# Determine config options from installed nmh.
- mhparam=`which mhparam`
- mhbin=`dirname "$mhparam"`
+ mhbin=`finddir install-mh`
config_prefix=`cd $mhbin/.. && pwd`
- mtsconf=`dirname "$mhbin"`/etc/mts.conf
+ mtsconf=`mhparam etcdir`/mts.conf
if [ -f "$mtsconf" ]; then
mts_entry=`grep '^mts:' "$mtsconf"`
if [ "$mts_entry" ]; then
fi
fi
- if $ldd "$mhbin/inc" | grep sasl >/dev/null; then
- config_sasl=y
- fi
-
- if $ldd "$mhbin/inc" | grep ssl >/dev/null; then
- config_tls=y
+ if test -x "$mhbin/mhparam"; then
+ if mhparam sasl >/dev/null; then
+ case `$mhbin/mhparam sasl` in
+ *sasl*) config_sasl=y ;;
+ esac
+
+ case `$mhbin/mhparam tls` in
+ *tls*) config_tls=y ;;
+ esac
+ else
+ tput smso
+ echo "$0: SASL and TLS detection not supported with current nmh"
+ [ $yes -eq 1 ] && echo "will not configure either one in"
+ tput rmso
+ fi
fi
fi
-if [ "$EDITOR" ]; then
- config_editor="$EDITOR"
-elif [ "$VISUAL" ]; then
- config_editor="$VISUAL"
-fi
-
-[ "$PAGER" ] && config_pager="$PAGER"
-
[ $debug -ge 1 ] && config_debug=y
if [ $yes -eq 0 ]; then
read locking
[ "$locking" ] && config_locking="$locking"
- printf 'MTS (smtp|sendmail|pipe) [%s]: ' $config_mts
+ printf 'MTS (smtp|sendmail/smtp|sendmail/pipe) [%s]: ' $config_mts
read mts
[ "$mts" ] && config_mts="$mts"
config_tls=n
fi
- printf 'Default editor [%s]: ' $config_editor
- read editor
- [ "$editor" ] && config_editor="$editor"
-
- printf 'Pager [%s]: ' $config_pager
- read pager
- [ "$pager" ] && config_pager="$pager"
-
#### Don't confirm debug here: obey the -d option to this script.
fi
config_opts="$config_opts --with-cyrus-sasl"
[ "$config_tls" = y ] && \
config_opts="$config_opts --with-tls"
-[ "$config_editor" ] && \
- config_opts="$config_opts --with-editor=$config_editor"
-[ "$config_pager" ] && \
- config_opts="$config_opts --with-pager=$config_pager"
[ $config_debug = y ] && \
- config_opts="$config_opts --enable-debug"
+ config_opts="$config_opts --enable-debug --enable-assert"
#### dotlocking, the usual default, requires chgrp and chmod of inc.
fi
/bin/rm -f "$logfile"
-if [ -f configure -a -f Makefile.in ]; then
- :
-else
+if [ ! -f configure -o ! -f Makefile.in ]; then
[ $verbose -ge 1 ] && echo autoconfiguring . . .
./autogen.sh >>"$logfile" 2>&1
fi
####
[ $verbose -ge 1 ] && echo configuring . . .
echo ./configure $config_opts ${smtpservers:+"$smtpservers"} >>"$logfile" 2>&1
-./configure $config_opts ${smtpservers:+"$smtpservers"} >>"$logfile" 2>&1
+./configure CFLAGS="${CFLAGS:+$CFLAGS }-g -O2 -ansi -pedantic" \
+ $config_opts ${smtpservers:+"$smtpservers"} >>"$logfile" 2>&1
status=$?
if [ $status -eq 0 ]; then
status=$?
if [ $status -eq 0 ]; then
- if [ "${TESTS_SHELL}"x = x ]; then
+ if [ "$TESTS_SHELL"x = x ]; then
#### Bonus: use heirloom shell to test, if available, and if
#### TESTS_SHELL hadn't already been set.
heirloom_shell=/usr/lib/heirloom/5bin/sh
- if [ -x "${heirloom_shell}" ]; then
- TESTS_SHELL="${heirloom_shell}"; export TESTS_SHELL
+ if [ -x "$heirloom_shell" ]; then
+ TESTS_SHELL="$heirloom_shell"; export TESTS_SHELL
fi
fi
[ $verbose -ge 1 ] && echo testing . . .
- checkoutput=`make $check 2>>"$logfile"`
+ checkoutput=`make $check AM_COLOR_TESTS=always 2>>"$logfile"`
status=$?
tests_summary=`echo "$checkoutput" | grep tests`
#### If multiple tests not run, that line will be caught by the
#### "grep tests" above.
test_not_run=`echo "$checkoutput" | grep 'test was not run'`
+ fails=`echo "$checkoutput" | grep FAIL`
if [ "$tests_summary" ]; then
echo '===================' >>"$logfile"
- echo "$tests_summary" >>"$logfile"
[ "$test_not_run" ] && echo "$test_not_run" >>"$logfile"
+ [ "$fails" ] && echo "$fails" >>"$logfile"
+ echo "$tests_summary" >>"$logfile"
echo '===================' >>"$logfile"
[ "$check" = distcheck ] && \
- echo "$checkoutput" | tail -n 4 >>"$logfile"
+ echo "$checkoutput" | ${tail}4 >>"$logfile"
fi
if [ $status -eq 0 ]; then
fi
fi
-grep 'Error' "$logfile"
-grep 'warn' "$logfile"
-if [ $status -ne 0 ]; then
+grep Error "$logfile"
+grep warn "$logfile"
+
+if [ $status -eq 0 ]; then
+ [ $verbose -ge 1 ] && echo build completed successfully
+else
echo build failed!
echo build log is in "$logfile"
fi
-[ $status -eq 0 -a $verbose -ge 1 ] && echo build completed successfully
exit $status
projects / nmh / blobdiff