-.TH PICK %manext1% "November 6, 2012" "%nmhversion%"
-.\"
+.TH PICK %manext1% 2016-03-12 "%nmhversion%"
+.
.\" %nmhwarning%
-.\"
+.
.SH NAME
-pick \- search for messages by content
+pick \- search for nmh messages by content
.SH SYNOPSIS
.HP 5
.na
.B pick
+.RB [ \-help ]
+.RB [ \-version ]
.RI [ +folder ]
.RI [ msgs ]
+.RB [ \-reverse
+\&...]
.RB [ \-and
\&...]
.RB [ \-or
.RB [ \-sequence
.I name
\&...]
+.RB [ \-nosequence ]
.RB [ \-public " | " \-nopublic ]
.RB [ \-zero " | " \-nozero ]
-.RB [ \-list " | " \-nolist ]
-.RB [ \-version ]
-.RB [ \-help ]
+.RB [ \-list " | " \-nolist ]
+.RB [ \-debug ]
.PP
typical usage:
.PP
.RE
.ad
.SH DESCRIPTION
-.B Pick
+.B pick
searches within a folder for messages with the specified
contents, and then identifies those messages. Two types of search
primitives are available: pattern matching and date constraint
.PP
A modified
.IR grep (1)
-is used to perform the matching, so the
-full regular expression (see
+is used to perform the matching, so the full regular expression (see
.IR ed (1))
-facility is available
-within
+facility is available within
.IR pattern .
With
.BR \-search ,
is used directly, and with the others, the grep pattern constructed is:
.PP
.RS 5
-`component[ \\t]*:\&.*pattern'
+`component[ \\t]*:.*pattern'
.RE
.PP
This means that the pattern specified for a
.B \-search
-will be found
-everywhere in the message, including the header and the body, while
-the other pattern matching requests are limited to the single specified
+will be found everywhere in the message, including the header and the body,
+while the other pattern matching requests are limited to the single specified
component. The expression
.PP
.RS 5
is a shorthand for specifying
.PP
.RS 5
-`\-search \*(lqcomponent[ \\t]*:\&.*pattern\*(rq\ '
+`\-search \*(lqcomponent[ \\t]*:.*pattern\*(rq\ '
.RE
.PP
It is used to pick a component which is not one of \*(lqTo:\*(rq,
An example is
.RB \*(lq "pick\0\-\|\-reply\-to\0pooh" \*(rq.
.PP
-Pattern matching is performed on a per\-line basis. Within the header
+Pattern matching is performed on a per-line basis. Within the header
of the message, each component is treated as one long line, but in the
-body, each line is separate. Lower\-case letters in the search pattern
+body, each line is separate. Lower-case letters in the search pattern
will match either lower or upper case in the message, while upper case
will match only upper case.
.PP
Note that since the
.B \-date
-switch is a pattern matching operation (as
-described above), to find messages sent on a certain date the pattern
-string must match the text of the \*(lqDate:\*(rq field of the message.
+switch is a pattern matching operation (as described above),
+to find messages sent on a certain date the pattern string must match
+the text of the \*(lqDate:\*(rq field of the message.
.PP
Independent of any pattern matching operations requested, the switches
.B \-after
or
.B \-before
.I date
-may also be used to introduce date/time
-constraints on all of the messages. By default, the \*(lqDate:\*(rq
-field is consulted, but if another date yielding field (such as
-\*(lqBB\-Posted:\*(rq or \*(lqDelivery\-Date:\*(rq) should be used, the
+may also be used to introduce date/time constraints on all of the messages.
+By default, the \*(lqDate:\*(rq field is consulted, but if another
+date-yielding field (such as \*(lqBB\-Posted:\*(rq or
+\*(lqDelivery\-Date:\*(rq) should be used, the
.B \-datefield
.I field
switch may be used.
and
.BR \-after ,
.B pick
-will actually parse the date
-fields in each of the messages specified in `msgs' and compare them
-to the date/time specified. If
+will actually parse the date fields in each of the messages specified in
+`msgs' and compare them to the date/time specified. If
.B \-after
-is given, then only those
-messages whose \*(lqDate:\*(rq field value is chronologically after the
-date specified will be considered. The
+is given, then only those messages whose \*(lqDate:\*(rq field value is
+chronologically after the date specified will be considered. The
.B \-before
-switch specifies the
-complimentary action.
+switch specifies the complementary action.
.PP
Both the
.B \-after
and
.B \-before
-switches take legal 822\-style date
-specifications as arguments.
-.B Pick
-will default certain missing
-fields so that the entire date need not be specified. These fields
-are (in order of defaulting): timezone, time and timezone, date, date
-and timezone. All defaults are taken from the current date, time,
-and timezone.
-.PP
-In addition to 822\-style dates,
+switches take legal RFC 822-style date specifications as arguments.
+.B pick
+will default certain missing fields so that the entire date need not
+be specified. These fields are (in order of defaulting): timezone,
+time and timezone, date, date and timezone.
+All defaults are taken from the current date, time, and timezone.
+.PP
+In addition to RFC 822-style dates,
.B pick
-will also recognize any of
-the days of the week (\*(lqsunday\*(rq, \*(lqmonday\*(rq, and so on),
-and the special dates \*(lqtoday\*(rq, \*(lqyesterday\*(rq (24 hours
-ago), and \*(lqtomorrow\*(rq (24 hours from now). All days of the
-week are judged to refer to a day in the past (e.g., telling \fIpick\fR
-\*(lqsaturday\*(rq on a \*(lqtuesday\*(rq means \*(lqlast\ saturday\*(rq
-not \*(lqthis\ saturday\*(rq).
+will also recognize any of the days of the week (\*(lqsunday\*(rq,
+\*(lqmonday\*(rq, and so on), and the special dates \*(lqtoday\*(rq,
+\*(lqyesterday\*(rq (24 hours ago), and \*(lqtomorrow\*(rq
+(24 hours from now).
+All days of the week are judged to refer to a day in the past
+(e.g., telling \fIpick\fR \*(lqsaturday\*(rq on a \*(lqtuesday\*(rq
+means \*(lqlast\ saturday\*(rq not \*(lqthis\ saturday\*(rq).
.PP
Finally, in addition to these special specifications,
.B pick
-will
-also honor a specification of the form \*(lq\-dd\*(rq, which means
+will also honor a specification of the form \*(lq\-dd\*(rq, which means
\*(lqdd days ago\*(rq.
.PP
-.B Pick
-supports complex boolean operations on the searching primitives
-with the
+Use the
+.BR \-reverse
+switch to make
+.B pick
+find matching messages in reverse order, working from the highest message
+number down to the lowest. This can be useful in searching for recent
+messages in large folders, for example,
+.PP
+.RS 5
+.nf
+pick\0\-reverse\0\-from\0frated\0|\0xargs\0\-n1\0scan
+.fi
+.RE
+.PP
+.B pick
+supports complex boolean operations on the searching primitives with the
.BR \-and ,
.BR \-or ,
.BR \-not ,
.B \-not
switch, which in turn takes precedence over
.B \-and
-which in turn takes precedence
-over
+which in turn takes precedence over
.BR \-or .
To override the default precedence, the
.B \-lbrace
.PP
Once the search has been performed, if the
.B \-list
-switch is given, the
-message numbers of the selected messages are written to the standard
-output separated by newlines. This is
-.B extremely
-useful for
-quickly generating arguments for other
+switch is given, the message numbers of the selected messages are
+written to the standard output separated by newlines. This is
+.I extremely
+useful for quickly generating arguments for other
.B nmh
-programs by using the
-\*(lqbackquoting\*(rq syntax of the shell. For example, the command
+programs by using the \*(lqbackquoting\*(rq syntax of the shell.
+For example, the command
.PP
.RS 5
scan\0`pick\0+todo\0\-after\0\*(lq31 Mar 83 0123 PST\*(rq`
.PP
says to
.B scan
-those messages in the indicated folder which meet the
-appropriate criterion. Note that since
+those messages in the indicated folder which meet the appropriate
+criterion. Note that since
.BR pick 's
-context changes
-are written out prior to
+context changes are written out prior to
.BR scan 's
-invocation, you need not give
-the folder argument to
+invocation, you need not give the folder argument to
.B scan
as well.
.PP
defines a new message sequence for the current folder called
\*(lqfred\*(rq which contains exactly those messages that were selected.
.PP
+The
+.B \-nosequence
+switch will disable all previously named sequences, allowing
+those established by a profile component to be overridden.
+.PP
By default,
.B pick
-will zero the sequence before adding it. This
-action can be disabled with the
+will zero a sequence before adding it. This action can be disabled with the
.B \-nozero
-switch, which means that the
-messages selected by
+switch, which means that the messages selected by
.B pick
-will be added to the sequence, if it
-already exists, and any messages already a part of that sequence will
-remain so.
+will be added to the sequence, if it already exists, and any messages
+already a part of that sequence will remain so.
.PP
The
.B \-public
.B \-nopublic
switches are used by
.B pick
-in the
-same way
+in the same way
.B mark
uses them.
+.PP
+The
+.B \-debug
+switch causes pick to output a representation of the search pattern.
+.SS "Output when no messages are matched"
+If
+.B pick
+is used in a backquoted operation, such as
+.PP
+.RS 5
+scan\0`pick\0\-from\0jones`
+.RE
+.PP
+and
+.B pick
+selects no messages (e.g., no messages are from \*(lqjones\*(rq),
+then the shell will still run the outer command (e.g.,
+.BR scan ).
+Since no messages were matched,
+.B pick
+produced no output, and the argument given to the outer command as a
+result of backquoting
+.B pick
+is empty. In the case of
+.B nmh
+programs, the outer command now acts as if the default `msg' or `msgs'
+should be used (e.g., \*(lqall\*(rq in the case of
+.BR scan ).
+To prevent this unexpected behavior, if
+.B \-list
+was given, and if its standard output is not a tty, then
+.B pick
+outputs the illegal message number \*(lq0\*(rq when it fails.
+This lets the outer command fail gracefully as well.
.SH FILES
.fc ^ ~
.nf
-.ta \w'%etcdir%/ExtraBigFileName 'u
-^$HOME/\&.mh\(ruprofile~^The user profile
+.ta \w'%nmhetcdir%/ExtraBigFileName 'u
+^$HOME/.mh_profile~^The user profile
.fi
.SH "PROFILE COMPONENTS"
.fc ^ ~
or
.B refile
the selected messages. This was rather
-\*(lqinverted logic\*(rq from the UNIX point of view, so
+\*(lqinverted logic\*(rq from the Unix point of view, so
.B pick
was changed to define sequences and output those sequences. Hence,
.B pick
.B \-before
switch it applies to.
.PP
-If
-.B pick
-is used in a backquoted operation, such as
-.PP
-.RS 5
-scan\0`pick\0\-from\0jones`
-.RE
-.PP
-and
-.B pick
-selects no messages (e.g., no messages are from
-\*(lqjones\*(rq), then the shell will still run the outer command (e.g.,
-.BR scan ).
-Since no messages were matched,
-.B pick
-produced
-no output, and the argument given to the outer command as a result of
-backquoting
-.B pick
-is empty. In the case of
-.B nmh
-programs,
-the outer command now acts as if the default `msg' or `msgs' should be
-used (e.g., \*(lqall\*(rq in the case of
-.BR scan ).
-To prevent this
-unexpected behavior, if
-.B \-list
-was given, and if its standard output is not a tty, then
-.B pick
-outputs the illegal message number \*(lq0\*(rq
-when it fails. This lets the outer command fail gracefully as well.
-.PP
The pattern syntax \*(lq[l-r]\*(rq is not supported; each letter to be
matched must be included within the square brackets.
projects / nmh / blobdiff