fgets() reserves space for the NUL itself.

[nmh] / Makefile.am

diff --git a/Makefile.am b/Makefile.am
index f61643b5fcdf90837786e34b828901609a2dfc95..4886e96e0f13aaeedafc70312ac139000d454a74 100644 (file)
--- a/Makefile.am
+++ b/Makefile.am
@@ -82,6 +82,7 @@ TESTS = test/ali/test-ali test/anno/test-anno \
        test/mhlist/test-mhlist test/mhlist/test-ext-params \
        test/mhmail/test-mhmail \
        test/mhparam/test-mhparam test/mhpath/test-mhpath \
+       test/mhshow/test-binary \
        test/mhshow/test-charset test/mhshow/test-textcharset \
        test/mhshow/test-cte-binary test/mhshow/test-qp \
        test/mhshow/test-subpart test/mhshow/test-msg-buffer-boundaries \
@@ -111,10 +112,16 @@ TESTS = test/ali/test-ali test/anno/test-anno \
        test/whatnow/test-ls test/whom/test-whom \
        test/cleanup ## The "cleanup" test should always be last.
 
+XFAIL_TESTS = \
+    #
+
 check_SCRIPTS = test/common.sh
 check_PROGRAMS = test/getfullname test/getcanon test/fakepop test/fakesmtp \
                 test/getcwidth test/fakehttp
 
+## So they can be built without builing the `check' target.
+check-programs: $(check_PROGRAMS)
+
 ## The location of installed nmhetcdir is, for all purposes except
 ## distcheck, $nmhetcdir.  For distcheck, prepend $MH_INST_DIR (from
 ## test/common.sh.in), which is based on $MH_TEST_DIR (from
@@ -127,7 +134,6 @@ AM_DISTCHECK_CONFIGURE_FLAGS = DISABLE_SETGID_MAIL=1 \
 ## automake 1.12.6 on FreeBSD 9 needs the sbr/dtimep.c.
 ##
 CLEANFILES = config/version.c sbr/sigmsg.h sbr/dtimep.c etc/mts.conf \
-            etc/gen-ctype-checked sbr/ctype-checked.[hc] \
             etc/mhn.defaults man/man.sed man/mh-chart.man $(man_MANS) \
             *.plist
 clean-local:
@@ -150,11 +156,6 @@ superclean: maintainer-clean
        @rm -f $(SUPERCLEANFILES)
 .PHONY: superclean
 
-##
-## Files that need to be built before everything else
-##
-BUILT_SOURCES = sbr/ctype-checked.c
-
 ##
 ## This is a list of all programs that get installed in the "bin" directory
 ## Note that primary difference between "PROGRAMS" and "SCRIPTS" is that
@@ -179,13 +180,6 @@ nmhlibexec_PROGRAMS = uip/ap uip/dp uip/fmtdump uip/mhl uip/mkstemp \
 
 nmhlibexec_SCRIPTS = uip/spost
 
-##
-## Programs that MAY need to get built at some point; we need to list them
-## here if they don't appear in any other primary so Automake knows about
-## them and can properly record dependency information.
-##
-EXTRA_PROGRAMS = etc/gen-ctype-checked
-
 ##
 ## Internal libraries that we create as part of the build process
 ## but do not install
@@ -241,7 +235,7 @@ dist_doc_DATA = COPYRIGHT INSTALL NEWS README VERSION \
 ## Contribs that get installed in docdir/contrib/
 ##
 docs_contribdir = $(docdir)/contrib
-dist_docs_contrib_SCRIPTS = docs/contrib/replyfilter docs/contrib/build_nmh \
+dist_docs_contrib_SCRIPTS = docs/contrib/replyfilter \
                            docs/contrib/localpostproc docs/contrib/ml \
                            docs/contrib/vpick docs/contrib/replaliases
 dist_docs_contrib_DATA = docs/contrib/replaliases
@@ -291,7 +285,7 @@ man_SRCS = man/MH.man man/ali.man man/anno.man man/ap.man man/burst.man  \
 ## Files we need to include in the distribution which aren't found by
 ## Automake using the automatic rules
 ##
-EXTRA_DIST = autogen.sh config/version.sh sbr/icalparse.h \
+EXTRA_DIST = autogen.sh build_nmh config/version.sh sbr/icalparse.h \
             etc/mts.conf.in etc/mhn.defaults.sh etc/sendfiles \
             $(MHNSEARCHPROG) DATE MACHINES \
             docs/ChangeLog_MH-3_to_MH-6.6 \
@@ -510,9 +504,6 @@ test_fakehttp_LDADD = $(LDADD) $(POSTLINK)
 test_getcwidth_SOURCES = test/getcwidth.c
 test_getcwidth_LDADD = $(POSTLINK)
 
-etc_gen_ctype_checked_SOURCES = etc/gen-ctype-checked.c
-etc_gen_ctype_checked_LDADD = $(POSTLINK)
-
 ##
 ## Our rebuild rules for files that aren't built via the normal mechanisms
 ##
@@ -523,11 +514,6 @@ etc_gen_ctype_checked_LDADD = $(POSTLINK)
 config/version.c: Makefile $(srcdir)/config/version.sh
        env srcdir="$(srcdir)" sh $(srcdir)/config/version.sh $(VERSION) > ./config/version.c
 
-sbr/ctype-checked.h: etc/gen-ctype-checked
-       etc/gen-ctype-checked
-
-sbr/ctype-checked.c: etc/gen-ctype-checked sbr/ctype-checked.h
-
 etc/mts.conf: $(srcdir)/etc/mts.conf.in Makefile
        @rm -f $@
        $(SED) -e 's,%mts%,$(MTS),' \
@@ -538,6 +524,7 @@ etc/mts.conf: $(srcdir)/etc/mts.conf.in Makefile
                                < $(srcdir)/etc/mts.conf.in > $@
 
 etc/mhn.defaults: $(srcdir)/etc/mhn.defaults.sh $(MHNSEARCHPROG)
+       $(MKDIR_P) $(@D) # FIXME: A better way?
        @rm -f $@
        $(srcdir)/etc/mhn.defaults.sh $(MHNSEARCHPATH) $(MHNSEARCHPROG) > $@
 
@@ -615,7 +602,7 @@ sbr_libmh_a_SOURCES = sbr/addrsbr.c sbr/ambigsw.c sbr/atooi.c sbr/arglist.c \
                      sbr/makedir.c sbr/md5.c sbr/message_id.c \
                      sbr/mime_type.c sbr/mts.c sbr/netsec.c \
                      sbr/norm_charmap.c sbr/path.c \
-                     sbr/peekc.c sbr/pidwait.c sbr/pidstatus.c \
+                     sbr/pidwait.c sbr/pidstatus.c \
                      sbr/print_help.c sbr/print_sw.c sbr/print_version.c \
                      sbr/push.c sbr/putenv.c sbr/refile.c sbr/remdir.c \
                      sbr/r1bindex.c sbr/readconfig.c sbr/ruserpass.c \
@@ -736,16 +723,17 @@ rpm: dist
 ## These targets are not integrated into the other automake
 ## targets because they will be used so infrequently, if at all.
 ##
-gcov:
-       @if ./config.status --config | grep -e --enable-debug >/dev/null; then \
-          echo For best results with gcov, configure without --enable-debug; \
-        fi
+gcov: gcov-rebuild gcov-run gcov-process gcov-report
+gcov-rebuild:
        @echo rebuilding with AM_CFLAGS=--coverage . . .
-       @(make clean  &&  make AM_CFLAGS=--coverage) > /dev/null  && \
-         make check AM_CFLAGS=--coverage
+       @(make clean  &&  make AM_CFLAGS=--coverage) > /dev/null
+gcov-run:
+       make check AM_CFLAGS=--coverage
+gcov-process:
        @for i in `find . -name '*.gcda'`; do \
-          gcov -p -o `echo $$i | $(SED) 's%\\(.*\\)/%\\1 %'`; \
+          gcov -pro `echo $$i | $(SED) 's%\\(.*\\)/%\\1 %'`; \
         done
+gcov-report:
        @for i in `find . -name '*.gcno'`; do \
           if test -f `echo $$i | sed 's%\.gcno%.gcda%'`; then :; else \
             echo untested: $$i; \
@@ -755,7 +743,8 @@ gcov-mostlyclean:
        @find . -name '*.gcno' -o -name '*.gcda' | xargs rm
 gcov-clean: gcov-mostlyclean
        @find . -name '*.gcov' | xargs rm
-.PHONY: gcov gcov-mostlyclean gcov-clean
+.PHONY: gcov gcov-rebuild gcov-run gcov-process gcov-report \
+    gcov-mostlyclean gcov-clean
 
 
 ##