# Configures and builds nmh.
# * This script must be invoked from an nmh source directory.
# * This script retrieves configuration from the first existing nmh
-# installation on your $PATH, if any, as well as any $EDITOR/$VISUAL
-# and $PAGER environment variable settings.
+# installation on your $PATH, if any.
# * Unless the -y option is provided, this script then interactively
# walks you through confirmation of common configuration settings.
#
# ncurses-devel
# cyrus-sasl-devel, if using sasl
# openssl-devel, if using TLS
+# libcurl-devel, if using oauth
# autoconf and automake, with -s (see docs/README.developers for versions)
# rpm-build, with -r
-####
-#### OS-specific setup.
-####
-which=which
-ldd=ldd
-
####
#### Interpret command arguments.
####
fi
#### Check to see that we're in a nmh source directory.
-if grep 'the authors of nmh' COPYRIGHT >/dev/null; then
- :
-else
+if ! grep 'the authors of nmh' COPYRIGHT >/dev/null; then
echo "$0: not in nmh source directory"
exit 1
fi
#### Here are the config options that we will try to detect, then
#### confirm, and finally set.
config_prefix=/usr/local/nmh
+config_locking=
config_mts=smtp
config_smtpservers=localhost
config_sasl=n
config_tls=n
-config_editor=vi
-for i in more less most cat; do
- if which $i >/dev/null 2>&1; then
- config_pager=$i
- break
- fi
-done
+config_oauth=n
config_debug=n
+
+#### Find location of a program. Bourne shell just puts the name in
+#### $0 if it's found from the PATH, so search that if necessary.
+finddir() {
+ case $1 in
+ */*) dirname "$1" ;;
+ * ) IFS=:
+ for d in $PATH; do
+ [ -f "${d:=.}/$1" -a -x "$d/$1" ] && printf %s "$d" && break
+ done ;;
+ esac
+}
+
+#### Figure out whether or not to use -n with tail.
+case `printf 'OK\n' | tail -n 1 2>&1` in
+ OK) tail='tail -n ' ;;
+ *) tail='tail -' ;;
+esac
+
if install-mh -check >/dev/null 2>&1; then
# Determine config options from installed nmh.
- mhparam=`which mhparam`
- mhbin=`dirname "$mhparam"`
+ mhbin=`finddir install-mh`
config_prefix=`cd $mhbin/.. && pwd`
- mtsconf=`dirname "$mhbin"`/etc/mts.conf
+ mtsconf=`mhparam etcdir`/mts.conf
if [ -f "$mtsconf" ]; then
- mts_entry=`grep '^mts:' $mtsconf`
- if [ "mts_entry" ]; then
- mts=`echo $mts_entry | sed -e 's/^mts: *//'`
+ mts_entry=`grep '^mts:' "$mtsconf"`
+ if [ "$mts_entry" ]; then
+ mts=`echo "$mts_entry" | sed -e 's/^mts: *//'`
if [ "$mts" -a "$mts" != smtp ]; then
config_mts="$mts"
fi
fi
- mtsconfservers=`grep '^servers:' $mtsconf`
+ mtsconfservers=`grep '^servers:' "$mtsconf"`
if [ "$mtsconfservers" ]; then
- servers=`echo $mtsconfservers | sed -e 's/^servers: *//' -e 's/ /\\\ /g'`
+ servers=`echo "$mtsconfservers" | \
+ sed -e 's/^servers: *//' -e 's/ /\\\ /g'`
[ "$servers" ] && config_smtpservers="$servers"
fi
fi
- if $ldd $mhbin/inc | grep sasl >/dev/null; then
- config_sasl=y
- fi
-
- if $ldd $mhbin/inc | grep ssl >/dev/null; then
- config_tls=y
+ if test -x "$mhbin/mhparam"; then
+ if mhparam sasl >/dev/null; then
+ case `$mhbin/mhparam sasl` in
+ *sasl*) config_sasl=y ;;
+ esac
+
+ case `$mhbin/mhparam tls` in
+ *tls*) config_tls=y ;;
+ esac
+
+ case `$mhbin/mhparam oauth` in
+ *oauth*) config_oauth=y ;;
+ esac
+ else
+ tput smso
+ echo "$0: SASL, TLS, and OAuth2 detection not supported with current nmh"
+ [ $yes -eq 1 ] && echo "will not configure them in"
+ tput rmso
+ fi
fi
fi
-if [ "$EDITOR" ]; then
- config_editor="$EDITOR"
-elif [ "$VISUAL" ]; then
- config_editor="$VISUAL"
-fi
-
-[ "$PAGER" ] && config_pager="$PAGER"
-
[ $debug -ge 1 ] && config_debug=y
if [ $yes -eq 0 ]; then
read prefix
[ "$prefix" ] && config_prefix="$prefix"
- printf 'MTS (smtp|sendmail) [%s]: ' $config_mts
+ printf 'Locking type (dot|fcntl|flock|lockf) [determined by configure]: '
+ read locking
+ [ "$locking" ] && config_locking="$locking"
+
+ printf 'MTS (smtp|sendmail/smtp|sendmail/pipe) [%s]: ' $config_mts
read mts
[ "$mts" ] && config_mts="$mts"
- if [ "$mts" -o "$mts" = smtp ]; then
- :
- else
+ if [ "$config_mts" = smtp ]; then
printf 'SMTP server(s), space separated [%s]: ' $config_smtpservers
read response
servers=`echo $response | sed -e 's/ /\\\ /g'`
config_tls=n
fi
- printf 'Default editor [%s]: ' $config_editor
- read editor
- [ "$editor" ] && config_editor=$editor
-
- printf 'Pager [%s]: ' $config_pager
- read pager
- [ "$pager" ] && config_pager=$pager
+ printf 'OAuth2 support [%s]: ' $config_oauth
+ read response
+ if [ "$response" = y -o "$response" = Y ]; then
+ config_oauth=y
+ elif [ "$response" = n -o "$response" = N ]; then
+ config_oauth=n
+ fi
#### Don't confirm debug here: obey the -d option to this script.
fi
smtpservers=
config_opts="--prefix=$config_prefix"
+[ "$config_locking" ] && \
+ config_opts="$config_opts --with-locking=$config_locking"
[ "$config_mts" -a "$config_mts" != smtp ] && \
config_opts="$config_opts --with-mts=$config_mts"
[ "$config_smtpservers" -a "$config_smtpservers" != localhost ] && \
config_opts="$config_opts --with-cyrus-sasl"
[ "$config_tls" = y ] && \
config_opts="$config_opts --with-tls"
-[ "$config_editor" ] && \
- config_opts="$config_opts --with-editor=$config_editor"
-[ "$config_pager" ] && \
- config_opts="$config_opts --with-pager=$config_pager"
+[ "$config_oauth" = y ] && \
+ config_opts="$config_opts --with-oauth"
[ $config_debug = y ] && \
- config_opts="$config_opts --enable-debug"
+ config_opts="$config_opts --enable-debug --enable-assert"
+
+#### dotlocking, the usual default, requires chgrp and chmod of inc.
+installpriv=
+if [ $install -ge 1 -a `id -u` -ne 0 ]; then
+ if [ "$config_locking" = dot ]; then
+ echo "$0: "'install requires chgrp and chmod 2755'
+ echo 'so will sudo to install. Terminate with Ctrl-C if unacceptable.'
+ installpriv=sudo
+ fi
+fi
####
fi
fi
-/bin/rm -f $logfile
-if [ -f configure -a -f Makefile.in ]; then
- :
-else
+/bin/rm -f "$logfile"
+if [ ! -f configure -o ! -f Makefile.in ]; then
[ $verbose -ge 1 ] && echo autoconfiguring . . .
- ./autogen.sh >>$logfile 2>&1
+ ./autogen.sh >>"$logfile" 2>&1
fi
#### Build.
####
[ $verbose -ge 1 ] && echo configuring . . .
-echo ./configure $config_opts ${smtpservers:+"$smtpservers"} >>$logfile 2>&1
-./configure $config_opts ${smtpservers:+"$smtpservers"} >>$logfile 2>&1
+echo ./configure $config_opts ${smtpservers:+"$smtpservers"} >>"$logfile" 2>&1
+./configure CFLAGS="${CFLAGS:+$CFLAGS }-g -O2 -ansi -pedantic" \
+ $config_opts ${smtpservers:+"$smtpservers"} >>"$logfile" 2>&1
status=$?
if [ $status -eq 0 ]; then
[ $verbose -ge 1 ] && echo building . . .
- make >>$logfile 2>&1
+ make >>"$logfile" 2>&1
status=$?
if [ $status -eq 0 ]; then
+ if [ "$TESTS_SHELL"x = x ]; then
+ #### Bonus: use heirloom shell to test, if available, and if
+ #### TESTS_SHELL hadn't already been set.
+ heirloom_shell=/usr/lib/heirloom/5bin/sh
+ if [ -x "$heirloom_shell" ]; then
+ TESTS_SHELL="$heirloom_shell"; export TESTS_SHELL
+ fi
+ fi
+
[ $verbose -ge 1 ] && echo testing . . .
- checkoutput=`make $check 2>>$logfile`
+ checkoutput=`make $check AM_COLOR_TESTS=always 2>>"$logfile"`
status=$?
tests_summary=`echo "$checkoutput" | grep tests`
+ #### If multiple tests not run, that line will be caught by the
+ #### "grep tests" above.
+ test_not_run=`echo "$checkoutput" | grep 'test was not run'`
+ fails=`echo "$checkoutput" | grep FAIL`
if [ "$tests_summary" ]; then
- echo '===================' >>$logfile
- echo $tests_summary >>$logfile
- echo '===================' >>$logfile
+ echo '===================' >>"$logfile"
+ [ "$test_not_run" ] && echo "$test_not_run" >>"$logfile"
+ [ "$fails" ] && echo "$fails" >>"$logfile"
+ echo "$tests_summary" >>"$logfile"
+ echo '===================' >>"$logfile"
[ "$check" = distcheck ] && \
- echo "$checkoutput" | tail -n 4 >>$logfile
+ echo "$checkoutput" | ${tail}4 >>"$logfile"
fi
if [ $status -eq 0 ]; then
if [ $install -ge 1 ]; then
[ $verbose -ge 1 ] && echo installing . . .
- (make install) >/dev/null 2>>$logfile
+ ($installpriv make install) >/dev/null 2>>"$logfile"
status=$?
fi
if [ $status -eq 0 -a $build_rpm -ge 1 ]; then
[ $verbose -ge 1 ] && echo building rpm . . .
- make rpm >/dev/null 2>>$logfile
+ make rpm >/dev/null 2>>"$logfile"
status=$?
fi
fi
fi
fi
-grep 'Error' $logfile
-grep 'warn' $logfile
-[ $status -ne 0 ] && echo build failed!
-[ $status -eq 0 -a $verbose -ge 1 ] && echo build completed successfully
+grep Error "$logfile"
+grep warn "$logfile"
+
+if [ $status -eq 0 ]; then
+ [ $verbose -ge 1 ] && echo build completed successfully
+else
+ echo build failed!
+ echo build log is in "$logfile"
+fi
exit $status
projects / nmh / blobdiff