setup_test
+check_exit '-eq 1' mhstore -
+
expected="$MH_TEST_DIR/test-mhstore$$.expected"
+expected2="$MH_TEST_DIR/test-mhstore$$.expected2"
+expected_err="$MH_TEST_DIR/test-mhmail$$.expected_err"
actual="$MH_TEST_DIR/test-mhstore$$.actual"
+actual_err="$MH_TEST_DIR/test-mhmail$$.actual_err"
-cd $MH_TEST_DIR
+cd "$MH_TEST_DIR"
# check with no options and no current message
+start_test 'with no options and no current message'
run_test 'mhstore' 'mhstore: no cur message'
# check with no options and current message
-folder +inbox 5 > /dev/null
-cat > $expected <<EOF
+start_test 'with no options and current message'
+folder +inbox 5 >/dev/null
+cat >"$expected" <<'EOF'
This is message number 5
EOF
run_test 'mhstore' 'storing message 5 as file 5.txt'
-check $expected 5.txt 'keep first'
+check "$expected" 5.txt 'keep first'
# check with folder and current message
+start_test 'with folder and current message'
run_test 'mhstore +inbox' 'storing message 5 as file 5.txt'
-check $expected 5.txt 'keep first'
+check "$expected" 5.txt 'keep first'
# check with specified message
+start_test 'with specified message'
run_test 'mhstore 5' 'storing message 5 as file 5.txt'
-check $expected 5.txt 'keep first'
+check "$expected" 5.txt 'keep first'
# check -file
+start_test '-file'
run_test "mhstore -file $MH_TEST_DIR/Mail/inbox/5" \
"storing message $MH_TEST_DIR/Mail/inbox/5 as file 5.txt"
-check $expected 5.txt 'keep first'
+check "$expected" 5.txt 'keep first'
# check -file -
+start_test '-file -'
stored_contents=`run_prog mhstore -file - < $MH_TEST_DIR/Mail/inbox/5 2>&1 | \
sed 's/.*as file //'`
-check $expected $stored_contents 'keep first'
+check "$expected" "$stored_contents" 'keep first'
-# check -outfile
-run_prog mhstore 5 -outfile "$actual" 2>&1 | grep -v '^storing' && \
- echo unexpected output from test-mhstore check -outfile >&2
-check $expected "$actual" 'keep first'
+# check -outfile and -noverbose
+start_test '-outfile and -noverbose'
+run_prog mhstore 5 -noverbose -outfile "$actual" >"$actual_err" 2>&1
+printf '' >"$expected_err"
+check "$expected" "$actual" 'keep first'
+check "$expected_err" "$actual_err"
# check -outfile -
-echo 'storing message 5 to stdout' >>"$expected"
+start_test '-outfile -'
+printf '%s\n' 'storing message 5 to stdout' >>"$expected"
run_prog mhstore 5 -outfile - >"$actual" 2>&1
-check $expected "$actual"
+check "$expected" "$actual"
# check message number greater than highest
+start_test 'message number greater than highest'
run_test 'mhstore 11' "mhstore: message 11 doesn't exist"
# check multiple messages
+start_test 'multiple messages'
run_test 'mhstore 4 6' 'storing message 4 as file 4.txt
storing message 6 as file 6.txt'
-cat > $expected <<EOF
+cat >"$expected" <<'EOF'
This is message number 4
EOF
-check $expected 4.txt
-cat > $expected <<EOF
+check "$expected" 4.txt
+cat >"$expected" <<'EOF'
This is message number 6
EOF
-check $expected 6.txt
+check "$expected" 6.txt
# Write message with a text/plain subpart.
msgfile=`mhpath new`
-cat > $msgfile <<EOF
+cat >"$msgfile" <<'EOF'
To: recipient@example.com
From: sender@example.com
Subject: mhlist test
------- =_aaaaaaaaaa0
Content-Type: text/plain; charset="iso-8859-1"; name="test4.txt"
Content-Disposition: attachment; filename="test4.txt"
+Content-MD5: cMI1lB/LZ4jgVl3EbhdyWA==
Content-Transfer-Encoding: base64
VGhpcyBpcyB0aGUgZm91cnRoIHRleHQvcGxhaW4gcGFydC4NClRoaXMgdGVzdCBoYXMgbXVsdGlw
EOF
# check -part
-cat > $expected <<EOF
+start_test '-part'
+cat >"$expected" <<'EOF'
This is the third text/plain part.
EOF
run_test 'mhstore last -part 3' 'storing message 11 part 3 as file 11.3.txt'
-check $expected 11.3.txt
+check "$expected" 11.3.txt
# check -part of a subpart
-cat > $expected <<EOF
+start_test '-part of a subpart'
+cat >"$expected" <<'EOF'
This is the first text/plain part, in a subpart.
EOF
run_test 'mhstore last -part 1.1' \
'storing message 11 part 1.1 as file 11.1.1.txt'
-check $expected 11.1.1.txt 'keep first'
+check "$expected" 11.1.1.txt 'keep first'
# check -type
+start_test '-type'
run_test 'mhstore last -type text/plain' \
'storing message 11 part 1.1 as file 11.1.1.txt
storing message 11 part 2 as file 11.2.txt
storing message 11 part 3 as file 11.3.txt
storing message 11 part 4 as file 11.4.txt'
-check $expected 11.1.1.txt
-cat > $expected <<EOF
+check "$expected" 11.1.1.txt
+cat >"$expected" <<'EOF'
This is the second text/plain part.
EOF
-check $expected 11.2.txt
-cat > $expected <<EOF
+check "$expected" 11.2.txt
+cat >"$expected" <<'EOF'
This is the third text/plain part.
EOF
-check $expected 11.3.txt
-cat > $expected <<EOF
+check "$expected" 11.3.txt
+cat >"$expected" <<'EOF'
This is the fourth text/plain part.
This test has multiple lines.
EOF
-check $expected 11.4.txt
+check "$expected" 11.4.txt
# check -auto
-cat > $expected <<EOF
+start_test '-auto'
+cat >"$expected" <<'EOF'
This is the fourth text/plain part.
This test has multiple lines.
EOF
run_test 'mhstore last -part 4 -auto' \
'storing message 11 part 4 as file test4.txt'
-check $expected test4.txt 'keep first'
+check "$expected" test4.txt 'keep first'
# check -noauto, the default
+start_test '-noauto, the default'
run_test 'mhstore last -part 4 -auto -noauto' \
'storing message 11 part 4 as file 11.4.txt'
-check $expected 11.4.txt 'keep first'
+check "$expected" 11.4.txt 'keep first'
# check -verbose, the default
+start_test '-verbose, the default'
run_test 'mhstore last -part 4 -noverbose -verbose' \
'storing message 11 part 4 as file 11.4.txt'
-check $expected 11.4.txt 'keep first'
+check "$expected" 11.4.txt 'keep first'
# check -noverbose
+start_test '-noverbose'
run_test 'mhstore last -part 4 -noverbose' ''
-check $expected 11.4.txt
+check "$expected" 11.4.txt
# check that -auto obeys Content-Disposition header
-cat > $expected <<EOF
+start_test 'that -auto obeys Content-Disposition header'
+cat >"$expected" <<'EOF'
This is the first text/plain part, in a subpart.
EOF
run_test 'mhstore last -part 1.1 -auto' \
'storing message 11 part 1.1 as file test1.txt'
-check $expected test1.txt
+check "$expected" test1.txt
# check -check
-cat > $expected <<EOF
+start_test '-check'
+cat >"$expected" <<'EOF'
This is the second text/plain part.
EOF
run_test 'mhstore last -part 2 -check' \
'storing message 11 part 2 as file 11.2.txt'
-check $expected 11.2.txt 'keep first'
+check "$expected" 11.2.txt 'keep first'
+
+# check with -check on base64 encoded part
+start_test 'with -check on base64 encoded part'
+cat >"$expected2" <<'EOF'
+This is the fourth text/plain part.
+This test has multiple lines.
+EOF
+run_test 'mhstore last -part 4 -check' \
+ 'storing message 11 part 4 as file 11.4.txt'
+check "$expected2" 11.4.txt
# check -check with bad MD5 checksum
-sed 's/\(Content-MD5: \)kq+Hnc/\1BADBAD/' $msgfile > $MH_TEST_DIR/$$.tmp
-mv -f $MH_TEST_DIR/$$.tmp $msgfile
+start_test '-check with bad MD5 checksum'
+sed 's/\(Content-MD5: \)kq+Hnc/\1BADBAD/' "$msgfile" >"$MH_TEST_DIR/$$.tmp"
+mv -f "$MH_TEST_DIR/$$.tmp" "$msgfile"
run_test 'mhstore last -part 2 -check' \
'storing message 11 part 2 as file 11.2.txt
mhstore: content integrity suspect (digest mismatch) -- continuing
(content text/plain in message 11, part 2)'
-check $expected 11.2.txt 'keep first'
+check "$expected" 11.2.txt 'keep first'
# check -nocheck, the default
+start_test '-nocheck, the default'
run_test 'mhstore last -part 2 -check -nocheck' \
'storing message 11 part 2 as file 11.2.txt'
-check $expected 11.2.txt
+check "$expected" 11.2.txt 'keep first'
+
+# check -outfile - with -file
+start_test '-outfile - with -file'
+run_prog mhstore -noverbose -file `mhpath 11` -part 2 -outfile - >"$actual" 2>&1
+check "$expected" "$actual"
# check reassembly of message/partial messages (RFC 1521, 7.3.2)
+start_test 'reassembly of message/partial messages (RFC 1521, 7.3.2)'
msgfile=`mhpath new`
-cat > $msgfile <<EOF
+cat >"$msgfile" <<'EOF'
To: recipient@example.com
From: sender@example.com
Subject: mhlist test
EOF
msgfile=`mhpath new`
-cat > $msgfile <<EOF
+cat >"$msgfile" <<'EOF'
To: recipient@example.com
From: sender@example.com
Subject: mhlist test
EOF
msgfile=`mhpath new`
-cat > $msgfile <<EOF
+cat >"$msgfile" <<'EOF'
To: recipient@example.com
From: sender@example.com
Subject: mhlist test
run_test 'mhstore last:3' \
'reassembling partials 12,13,14 to folder inbox as message 15'
-cat > $expected <<EOF
+cat >"$expected" <<'EOF'
This is part one of three.
This is part two of three.
This is part three of three.
EOF
run_test 'mhstore last' 'storing message 15 as file 15.txt'
-check $expected 15.txt
+check "$expected" 15.txt
# cd into Mail directory because it gets cleaned up by the exit trap.
cd Mail
# check -clobber always
-folder +inbox 7 > /dev/null
+start_test '-clobber always'
+folder +inbox 7 >/dev/null
touch 7.txt
-cat > $expected <<EOF
+cat >"$expected" <<'EOF'
This is message number 7
EOF
run_test 'mhstore' 'storing message 7 as file 7.txt'
-check $expected 7.txt 'keep first'
+check "$expected" 7.txt 'keep first'
run_test 'mhstore -clobber ask -clobber always' \
'storing message 7 as file 7.txt'
-check $expected 7.txt 'keep first'
+check "$expected" 7.txt 'keep first'
# check -clobber auto
+start_test '-clobber auto'
touch 7.txt
run_test 'mhstore -clobber auto' 'storing message 7 as file 7-1.txt'
-check $expected 7-1.txt 'keep first'
+check "$expected" 7-1.txt 'keep first'
touch 7-1.txt
run_test 'mhstore -clobber auto' 'storing message 7 as file 7-2.txt'
-check $expected 7-2.txt 'keep first'
+check "$expected" 7-2.txt 'keep first'
# check -clobber suffix
+start_test '-clobber suffix'
run_test 'mhstore -clobber suffix' 'storing message 7 as file 7.txt.1'
-check $expected 7.txt.1 'keep first'
+check "$expected" 7.txt.1 'keep first'
touch 7.txt.1
run_test 'mhstore -clobber suffix' 'storing message 7 as file 7.txt.2'
-check $expected 7.txt.2 'keep first'
+check "$expected" 7.txt.2 'keep first'
# Don't check -clobber ask because it requires connection to a
# terminal, and this test won't always be run with one.
# check -clobber never. Its exit status is the number of files not overwritten.
+start_test '-clobber never. Its exit status is the number of files not overwritten.'
run_test 'mhstore -clobber never' \
- "mhstore: will not overwrite `pwd`/7.txt with -clobber never"
+ "mhstore: will not overwrite $MH_TEST_DIR/Mail/7.txt with -clobber never"
set +e
mhstore -clobber never >/dev/null 2>&1
run_test "echo $?" 1
cd ..
-# check with relative nmh-storage profile component
-storagedir=storagedir
+# check with short relative nmh-storage profile component
+start_test 'with short relative nmh-storage profile component'
+storagedir=s
dir="$MH_TEST_DIR/Mail/inbox/$storagedir"
mkdir "$dir"
-echo "nmh-storage: $storagedir" >> $MH
-cat > $expected <<EOF
+printf '%s\n' "nmh-storage: $storagedir" >>"$MH"
+cat >"$expected" <<'EOF'
This is the fourth text/plain part.
This test has multiple lines.
EOF
run_test 'mhstore 11 -part 4' \
"storing message 11 part 4 as file $storagedir/11.4.txt"
-check $expected "$dir/11.4.txt" 'keep first'
+check "$expected" "$dir/11.4.txt" 'keep first'
+rmdir "$dir"
+sed '$d' "$MH" >"$MH.new"
+mv "$MH.new" "$MH"
+
+# check with relative nmh-storage profile component
+start_test 'with relative nmh-storage profile component'
+storagedir=storagedir
+dir="$MH_TEST_DIR/Mail/inbox/$storagedir"
+mkdir "$dir"
+printf '%s\n' "nmh-storage: $storagedir" >>"$MH"
+run_test 'mhstore 11 -part 4' \
+"storing message 11 part 4 as file $storagedir/11.4.txt"
+check "$expected" "$dir/11.4.txt" 'keep first'
# check with relative nmh-storage profile component and -auto
+start_test 'with relative nmh-storage profile component and -auto'
run_test 'mhstore 11 -part 4 -auto' \
"storing message 11 part 4 as file $storagedir/test4.txt"
-check $expected "$dir/test4.txt" 'keep first'
+check "$expected" "$dir/test4.txt" 'keep first'
# check with absolute nmh-storage profile component
+start_test 'with absolute nmh-storage profile component'
absstoragedir="$MH_TEST_DIR/$storagedir"
mkdir "$absstoragedir"
-sed "s%\(nmh-storage: \)storagedir%\1$absstoragedir%" $MH > $MH.new
-mv -f $MH.new $MH
+sed "s%\(nmh-storage: \)storagedir%\1$absstoragedir%" "$MH" >"$MH.new"
+mv -f "$MH.new" "$MH"
run_test 'mhstore 11 -part 4' \
"storing message 11 part 4 as file $storagedir/11.4.txt"
-check $expected "$absstoragedir/11.4.txt" 'keep first'
+check "$expected" "$absstoragedir/11.4.txt" 'keep first'
# check with absolute nmh-storage profile component and -auto
+start_test 'with absolute nmh-storage profile component and -auto'
run_test 'mhstore 11 -part 4 -auto' \
"storing message 11 part 4 as file $storagedir/test4.txt"
-check $expected "$absstoragedir/test4.txt"
+check "$expected" "$absstoragedir/test4.txt"
rmdir "$absstoragedir"
+finish_test
exit $failed
projects / nmh / blobdiff