#! /bin/sh
#
# Configures and builds nmh.
-# * This script must be invoked from an nmh source directory.
+# * If this script is not invoked from an nmh source directory, it
+# will attempt to download the nmh sources.
# * This script retrieves configuration from the first existing nmh
# installation on your $PATH, if any.
# * Unless the -y option is provided, this script then interactively
# walks you through confirmation of common configuration settings.
#
+# This file can be downloaded and immediately run using, e.g.,
+# wget http://git.savannah.gnu.org/cgit/nmh.git/plain/docs/contrib/build_nmh
+# sh build_nmh
+#
# Typical usage:
# The first time you invoke this script, use the -i option to install
# nmh in the specified location. The script will walk you through the
#
# Option summary:
# First time use:
+# -b <branch> to specify branch to check out, only if downloading sources
# -i to install nmh
# -v to display progress
# Subsequent uses, assuming installed nmh bin directory is on $PATH:
# -y to accept all configuration options without confirmation
# Output control:
-# -l <logfile name>, default 'build_nmh.log'
+# -l <logfile name>, default 'build_nmh.log', - for stdout/stderr
# Advanced/developer use:
# -c to run 'make distcheck' instead of 'make check'
# -d to build nmh with debug enabled
# ncurses-devel
# cyrus-sasl-devel, if using sasl
# openssl-devel, if using TLS
+# libcurl-devel, if using oauth
# autoconf and automake, with -s (see docs/README.developers for versions)
# rpm-build, with -r
+usage="usage: $0
+ [-b <branch>, only if downloading]
+ [-c to run 'make distcheck' instead of 'make check']
+ [-d to build nmh with debug enabled]
+ [-i to install nmh]
+ [-l <logfile name>, default '$logfile']
+ [-r to build rpm]
+ [-s to use 'make superclean': requires recent autoconf and automake]
+ [-v to display progress]
+ [-y to accept all configuration options without confirmation]"
+
+#### Exit with error message.
+die() {
+ echo "$0: $*" 1>&2
+ exit 1
+}
+
+#### Find location of a program. Bourne shell just puts the name in
+#### $0 if it's found from the PATH, so search that if necessary.
+finddir() {
+ case $1 in
+ */*) dirname "$1" ;;
+ * ) IFS=:
+ for d in $PATH; do
+ [ -f "${d:=.}/$1" -a -x "$d/$1" ] && printf %s "$d" && break
+ done ;;
+ esac
+}
+
+gitrepo=git.savannah.nongnu.org
+invocation="$0 $*"
+tmpfile=/tmp/build_nmh-$$.log
+trap 'rm -f "$tmpfile"' EXIT
####
#### Interpret command arguments.
####
+branch=master
check=check
debug=0
install=0
superclean=0
verbose=0
yes=0
-usage="usage: $0
- [-c to run 'make distcheck' instead of 'make check']
- [-d to build nmh with debug enabled]
- [-i to install nmh]
- [-l <logfile name>, default '$logfile']
- [-r to build rpm]
- [-s to use 'make superclean': requires recent autoconf and automake]
- [-v to display progress]
- [-y to accept all configuration options without confirmation]"
-while getopts 'cdil:rsvy?' arg; do
+while getopts 'cb:dil:rsvy?' arg; do
case $arg in
+ b ) branch="$OPTARG" ;;
c ) check=distcheck ;;
d ) debug=1 ;;
i ) install=1 ;;
done
shift `expr $OPTIND - 1`
-#### No command line arguments are supported.
-if [ $# -gt 0 ]; then
- echo "usage: $0"
- exit 1
-fi
+#### Redirect all output to tmp file. Then at end of script, copy
+#### it to either logfile or stdout. Also, grep it for errors and
+#### warnings.
+exec 3>&1 >"$tmpfile" 2>&1
+
+echo "$invocation"
+
+#### No non-option command line arguments are supported.
+[ $# -gt 0 ] && die "$usage"
#### Check to see that we're in a nmh source directory.
-if grep 'the authors of nmh' COPYRIGHT >/dev/null; then
+if grep 'the authors of nmh' COPYRIGHT >/dev/null 2>&1; then
:
else
- echo "$0: not in nmh source directory"
- exit 1
+ #### Download sources from repo.
+ gitdir=`finddir git`
+ if [ "$gitdir" ]; then
+ #### Use git repo.
+ [ "$verbose" -eq 0 ] && git_opts=--quiet
+ [ "$branch" == master ] ||
+ git_opts="${git_opts:+$git_opts }--branch $branch"
+ if "$gitdir"/git clone --depth 1 $git_opts "git://$gitrepo/nmh.git"; then
+ cd nmh || die "failed to clone nmh"
+ printf "commit %s\n" `git log --max-count=1 --pretty=format:%H`
+ else
+ die 'failed to clone git repo'
+ fi
+ else
+ [ -e nmh-"$branch" ] && die "nmh-$branch exists, will not overrwrite"
+
+ #### Use snapshot.
+ tarball="nmh-$branch.tar.gz"
+ repo="http://$gitrepo/cgit/nmh.git/snapshot"
+ snapshot="$repo/$tarball"
+ if [ "`finddir wget`" ]; then
+ [ "$verbose" -eq 0 ] && wget_opts='--quiet'
+ wget --output-document - $wget_opts "$snapshot" | gzip -d | tar xf -
+ elif [ "`finddir curl`" ]; then
+ [ "$verbose" -eq 0 ] && curl_opts='--silent --show-error'
+ curl --location $curl_opts "$snapshot" | gzip -d | tar xf -
+ else
+ die 'unable to find program to download nmh sources'
+ fi
+
+ if [ -d nmh-"$branch" ]; then
+ cd nmh-"$branch" || die "failed to download and extract nmh-$branch"
+ else
+ die "failed to download nmh-$branch sources"
+ fi
+ fi
fi
####
config_smtpservers=localhost
config_sasl=n
config_tls=n
+config_oauth=n
config_debug=n
-#### Find location of a program. Bourne shell just puts the name in
-#### $0 if it's found from the PATH, so search that if necessary.
-finddir() {
- case $1 in
- */*) dirname "$1" ;;
- * ) IFS=:
- for d in $PATH; do
- [ -f "${d:=.}/$1" -a -x "$d/$1" ] && printf %s "$d" && break
- done ;;
- esac
-}
-
#### Figure out whether or not to use -n with tail.
case `printf 'OK\n' | tail -n 1 2>&1` in
OK) tail='tail -n ' ;;
esac
if install-mh -check >/dev/null 2>&1; then
- # Determine config options from installed nmh.
+ #### Determine config options from installed nmh.
mhbin=`finddir install-mh`
config_prefix=`cd $mhbin/.. && pwd`
case `$mhbin/mhparam tls` in
*tls*) config_tls=y ;;
esac
+
+ case `$mhbin/mhparam oauth` in
+ *oauth*) config_oauth=y ;;
+ esac
else
tput smso
- echo "$0: SASL and TLS detection not supported with current nmh"
- [ $yes -eq 1 ] && echo "will not configure either one in"
+ echo "$0: SASL, TLS, and OAuth2 detection not supported with current nmh"
+ [ $yes -eq 1 ] && echo "will not configure them in"
tput rmso
fi
fi
if [ $yes -eq 0 ]; then
#### Confirm each config setting with user.
- printf 'Install prefix [%s]: ' $config_prefix
+ printf 'Install prefix [%s]: ' $config_prefix >&3
read prefix
[ "$prefix" ] && config_prefix="$prefix"
- printf 'Locking type (dot|fcntl|flock|lockf) [determined by configure]: '
+ printf 'Locking type (dot|fcntl|flock|lockf) [determined by configure]: ' >&3
read locking
[ "$locking" ] && config_locking="$locking"
- printf 'MTS (smtp|sendmail/smtp|sendmail/pipe) [%s]: ' $config_mts
+ printf 'MTS (smtp|sendmail/smtp|sendmail/pipe) [%s]: ' $config_mts >&3
read mts
[ "$mts" ] && config_mts="$mts"
if [ "$config_mts" = smtp ]; then
- printf 'SMTP server(s), space separated [%s]: ' $config_smtpservers
+ printf 'SMTP server(s), space separated [%s]: ' $config_smtpservers >&3
read response
servers=`echo $response | sed -e 's/ /\\\ /g'`
[ "$servers" ] && config_smtpservers="$servers"
fi
- printf 'Cyrus SASL support [%s]: ' $config_sasl
+ printf 'Cyrus SASL support [%s]: ' $config_sasl >&3
read response
- if [ "$response" = y -o "$response" = Y ]; then
- config_sasl=y
- elif [ "$response" = n -o "$response" = N ]; then
- config_sasl=n
- fi
+ [ "$response" = y -o "$response" = Y ] && config_sasl=y
- printf 'TLS support [%s]: ' $config_tls
+ printf 'TLS support [%s]: ' $config_tls >&3
read response
- if [ "$response" = y -o "$response" = Y ]; then
- config_tls=y
- elif [ "$response" = n -o "$response" = N ]; then
- config_tls=n
- fi
+ [ "$response" = y -o "$response" = Y ] && config_tls=y
+
+ printf 'OAuth2 support [%s]: ' $config_oauth >&3
+ read response
+ [ "$response" = y -o "$response" = Y ] && config_oauth=y
#### Don't confirm debug here: obey the -d option to this script.
fi
smtpservers=
config_opts="--prefix=$config_prefix"
-[ "$config_locking" ] && \
+[ "$config_locking" ] &&
config_opts="$config_opts --with-locking=$config_locking"
-[ "$config_mts" -a "$config_mts" != smtp ] && \
+[ "$config_mts" -a "$config_mts" != smtp ] &&
config_opts="$config_opts --with-mts=$config_mts"
-[ "$config_smtpservers" -a "$config_smtpservers" != localhost ] && \
+[ "$config_smtpservers" -a "$config_smtpservers" != localhost ] &&
smtpservers="--with-smtpservers=$config_smtpservers"
-[ "$config_sasl" = y ] && \
- config_opts="$config_opts --with-cyrus-sasl"
-[ "$config_tls" = y ] && \
- config_opts="$config_opts --with-tls"
-[ $config_debug = y ] && \
- config_opts="$config_opts --enable-debug --enable-assert"
-
+[ "$config_sasl" = y ] && config_opts="$config_opts --with-cyrus-sasl"
+[ "$config_tls" = y ] && config_opts="$config_opts --with-tls"
+[ "$config_oauth" = y ] && config_opts="$config_opts --with-oauth"
+[ $config_debug = y ] && config_opts="$config_opts --enable-assert"
#### dotlocking, the usual default, requires chgrp and chmod of inc.
installpriv=
-if [ $install -ge 1 -a `id -u` -ne 0 ]; then
+if [ $install -ge 1 -a "$LOGNAME" != root ]; then
if [ "$config_locking" = dot ]; then
echo "$0: "'install requires chgrp and chmod 2755'
echo 'so will sudo to install. Terminate with Ctrl-C if unacceptable.'
fi
fi
+[ -x tools/showbuildenv ] && tools/showbuildenv | grep -Ev 'PID=|SHLVL'
+
####
-#### Clean up, and set up with autoconfig if necessary.
+#### Set up with autoconfig if necessary.
####
if [ -f Makefile ]; then
- [ $verbose -ge 1 ] && echo cleaning . . .
+ [ $verbose -ge 1 ] && echo cleaning . . . >&3
if [ $superclean -ge 1 ]; then
make superclean >/dev/null
else
fi
fi
-/bin/rm -f "$logfile"
-if [ -f configure -a -f Makefile.in ]; then
- :
-else
- [ $verbose -ge 1 ] && echo autoconfiguring . . .
- ./autogen.sh >>"$logfile" 2>&1
+if [ ! -f configure -o ! -f Makefile.in ]; then
+ [ $verbose -ge 1 ] && echo autoconfiguring . . . >&3
+ ./autogen.sh
+ [ $? -ne 0 ] &&
+ die "autogen failed, see MACHINES file for autoconf,
+automake, flex, and bison requirements"
fi
####
#### Build.
####
-[ $verbose -ge 1 ] && echo configuring . . .
-echo ./configure $config_opts ${smtpservers:+"$smtpservers"} >>"$logfile" 2>&1
-./configure $config_opts ${smtpservers:+"$smtpservers"} >>"$logfile" 2>&1
+[ $verbose -ge 1 ] && echo configuring . . . >&3
+if [ -z "$CFLAGS" ]; then
+ #### Only use these flags with gcc.
+ if cc -dM -E - </dev/null 2>&1 | grep __GNUC__ >/dev/null; then
+ #### configure will supply -g -O2 with gcc, but only if CFLAGS
+ #### isn't defined.
+ CFLAGS='-g -O2 -ansi -pedantic'
+ fi
+fi
+
+printf '\n./configure %s\n' "$config_opts${smtpservers:+ $smtpservers}"
+./configure CFLAGS="${CFLAGS}" $config_opts${smtpservers:+" $smtpservers"}
status=$?
if [ $status -eq 0 ]; then
- [ $verbose -ge 1 ] && echo building . . .
- make >>"$logfile" 2>&1
+ [ $verbose -ge 1 ] && echo building . . . >&3
+ make
status=$?
if [ $status -eq 0 ]; then
if [ -x "$heirloom_shell" ]; then
TESTS_SHELL="$heirloom_shell"; export TESTS_SHELL
fi
- fi
+ fi
- [ $verbose -ge 1 ] && echo testing . . .
- checkoutput=`make $check AM_COLOR_TESTS=always 2>>"$logfile"`
+ if [ "$CFLAGS" ]; then
+ #### Pass DISTCHECK_CONFIGURE_FLAGS through an environment
+ #### variable to avoid automake's quoting.
+ DISTCHECK_CONFIGURE_FLAGS="CFLAGS='${CFLAGS}'"
+ export DISTCHECK_CONFIGURE_FLAGS
+ fi
+
+ [ $verbose -ge 1 ] && echo testing . . . >&3
+ checkoutput=`make $check AM_COLOR_TESTS=always`
status=$?
tests_summary=`echo "$checkoutput" | grep tests`
test_not_run=`echo "$checkoutput" | grep 'test was not run'`
fails=`echo "$checkoutput" | grep FAIL`
if [ "$tests_summary" ]; then
- echo '===================' >>"$logfile"
- [ "$test_not_run" ] && echo "$test_not_run" >>"$logfile"
- [ "$fails" ] && echo "$fails" >>"$logfile"
- echo "$tests_summary" >>"$logfile"
- echo '===================' >>"$logfile"
- [ "$check" = distcheck ] && \
- echo "$checkoutput" | ${tail}4 >>"$logfile"
+ echo '==================='
+ [ "$test_not_run" ] && echo "$test_not_run"
+ [ "$fails" ] && echo "$fails"
+ echo "$tests_summary"
+ echo '==================='
+ [ "$check" = distcheck ] && echo "$checkoutput" | ${tail}4
fi
if [ $status -eq 0 ]; then
if [ $install -ge 1 ]; then
- [ $verbose -ge 1 ] && echo installing . . .
- ($installpriv make install) >/dev/null 2>>"$logfile"
+ [ $verbose -ge 1 ] && echo installing . . . >&3
+ ($installpriv make install) >/dev/null
status=$?
fi
if [ $status -eq 0 -a $build_rpm -ge 1 ]; then
- [ $verbose -ge 1 ] && echo building rpm . . .
- make rpm >/dev/null 2>>"$logfile"
+ [ $verbose -ge 1 ] && echo building rpm . . . >&3
+ make rpm >/dev/null
status=$?
fi
fi
fi
fi
-grep Error "$logfile"
-grep warn "$logfile"
+####
+#### Report results.
+####
+
+#### Disable output redirection (and flush) so that we can grep.
+exec 1>&3 3>&-
+
+if [ "$logfile" != - ]; then
+ rm -f "$logfile"
+ exec 3>&1 >"$logfile" 2>&1
+fi
+
+cat "$tmpfile"
+grep -E 'Error|warn' "$tmpfile"
if [ $status -eq 0 ]; then
- [ $verbose -ge 1 ] && echo build completed successfully
+ [ $verbose -ge 1 ] && echo build completed successfully >&3
else
echo build failed!
- echo build log is in "$logfile"
+ [ "$logfile" = - ] || echo "build failed, build log is in $logfile" >&3
fi
exit $status
projects / nmh / blobdiff