-.\"
+.TH MHSHOW %manext1% 2015-02-08 "%nmhversion%"
+.
.\" %nmhwarning%
-.\" $Id$
-.\"
-.\" include the -mh macro file
-.so %etcdir%/tmac.h
-.\"
-.TH MHSHOW %manext1% "%nmhdate%" MH.6.8 [%nmhversion%]
+.
.SH NAME
-mhshow \- display MIME messages
+mhshow \- display nmh MIME messages
.SH SYNOPSIS
-.in +.5i
-.ti -.5i
-mhshow \%[+folder] \%[msgs] \%[\-file file]
-.br
-\%[\-part number]... \%[\-type content]...
-.br
-\%[\-serialonly] \%[\-noserialonly]
-\%[\-pause] \%[\-nopause]
-.br
-\%[\-check] \%[\-nocheck]
-\%[\-form formfile]
-.br
-\%[\-rcache policy] \%[\-wcache policy]
-.br
-\%[\-verbose] \%[\-noverbose]
-\%[\-version] \%[\-help]
-.in -.5i
-
+.HP 5
+.na
+.B mhshow
+.RB [ \-help ]
+.RB [ \-version ]
+.RI [ +folder ]
+.RI [ msgs ]
+.RB [ \-file
+.IR file ]
+.RB [ \-part
+.IR number ]
+\&...
+.RB [ \-type
+.IR content ]
+\&...
+.RB [ \-prefer
+.IR content ]
+\&...
+.RB [ \-noprefer ]
+.RB [ \-concat " | " \-noconcat ]
+.RB [ \-textonly " | " \-notextonly ]
+.RB [ \-inlineonly " | " \-noinlineonly ]
+.RB [ \-header " | " \-noheader ]
+.RB [ \-form
+.IR formfile ]
+.RB [ \-markform
+.IR formfile ]
+.RB [ \-rcache
+.IR policy ]
+.RB [ \-wcache
+.IR policy ]
+.RB [ \-check " | " \-nocheck ]
+.ad
.SH DESCRIPTION
-The \fImhshow\fR command display contents of a MIME (multi-media)
-message or collection of messages.
-
-\fImhshow\fR manipulates multi-media messages as specified in
-RFC\-2045 thru RFC\-2049. Currently \fImhshow\fR only supports
-encodings in message bodies, and does not support the encoding of
-message headers as specified in RFC\-2047.
-
-By default \fImhshow\fR will display all parts of a multipart
-message. By using the `\-part' and `\-type' switches, you may
-limit the scope of \fImhshow\fR to particular subparts (of a
-multipart content) and/or particular content types.
-
-The option `\-file\ file' directs \fImhshow\fR to use the specified file as
-the source message, rather than a message from a folder. If you specify
-this file as \*(lq-\*(rq, then \fImhshow\fR will accept the source message
-on the standard input. Note that the file, or input from standard input
-should be a validly formatted message, just like any other \fInmh\fR
-message. It should \fBNOT\fR be in mail drop format (to convert a file in
-mail drop format to a folder of \fInmh\fR messages, see \fIinc\fR\0(1)).
-
+The
+.B mhshow
+command displays contents of a MIME (multi-media) message, or collection
+of messages.
+.PP
+.B mhshow
+manipulates multi-media messages as specified in RFC 2045 to RFC 2049.
+Currently
+.B mhshow
+only supports encodings in message bodies, and does not support the
+encoding of message headers as specified in RFC 2047.
+.PP
+By default,
+.B mhshow
+will display only the text parts of a message that are not marked as
+attachments. This behavior can be changed by the
+.B \-notextonly
+and
+.B \-noinlineonly
+switches.
+In addition, by using the
+.BR \-part ,
+.BR \-type ,
+and
+.B \-prefer
+switches, you may limit and reorder the set of parts to be displayed,
+based on part number and/or content type.
+The inclusion of any
+.B \-part
+or
+.B \-type
+switches will override the default settings of
+.B \-textonly
+and
+.BR \-inlineonly .
+.PP
+The
+.B \-header
+switch controls whether
+.B mhshow
+will print a message separator header before each message that it
+displays. The header format can be controlled using
+.BR \-headerform ,
+to specify a file containing
+.IR mh\-format (5)
+instructions. A copy of the built-in default headerform can be found
+in %nmhetcdir%/mhshow.header, for reference.
+In addition to the normal set of
+.IR mh\-format (5)
+instructions, a "%{folder}" escape provides a string representing
+the current folder.
+.PP
+By default,
+.B mhshow
+will concatenate all content under one pager. If you want each part to
+be displayed separately, you can override the default behavior with
+.B \-noconcat.
+.PP
+The
+.B \-file
+.I file
+switch directs
+.B mhshow
+to use the specified file as the source message, rather than a message
+from a folder. If you specify this file as \*(lq-\*(rq, then
+.B mhshow
+will accept the source message on the standard input. Note that the
+file, or input from standard input, should be a validly formatted message,
+just like any other
+.B nmh
+message. It should
+.I not
+be in mail drop format (to convert a file in
+mail drop format to a folder of
+.B nmh
+messages, see
+.IR inc (1)).
+.PP
+The
+.B \-part
+switch can be given (one or more times) to restrict the set of
+subparts that will be displayed. (Obviously with no
+.B \-part
+switches, all parts will be considered.) If a
+.B \-part
+switch specifies a specific subpart (i.e., a "leaf" in the tree of
+MIME parts), then that part will always be displayed. If a
+.B \-part
+switch references a multipart/alternative part, then (in
+the absence of a
+.B \-type
+switch) only the default subpart of that multipart will be displayed.
+.PP
A part specification consists of a series of numbers separated by dots.
For example, in a multipart content containing three parts, these
would be named as 1, 2, and 3, respectively. If part 2 was also a
multipart content containing two parts, these would be named as 2.1 and
-2.2, respectively. Note that the `\-part' switch is effective for only
-messages containing a multipart content. If a message has some other
-kind of content, or if the part is itself another multipart content, the
-`\-part' switch will not prevent the content from being acted upon.
-
+2.2, respectively. Note that the
+.B \-part
+switch is effective only for messages containing a multipart content.
+If a message has some other kind of content, or if the part is itself
+another multipart content, the
+.B \-part
+switch will not prevent the content from being acted upon.
+.PP
+The
+.B \-type
+switch can also be used to restrict (or, when used in conjunction with
+.BR \-part ,
+to further restrict) the display of parts according to content type.
+One or more
+.B \-type
+switches part will only select the first match from a multipart/alternative,
+even if there is more than one subpart that matches (one of) the given
+content type(s).
+.PP
+Using either
+.B \-part
+or
+.B -type
+switches alone will cause either switch to select the part(s) they match.
+Using them together will select only the part(s) matched by both (sets of)
+switches. In other words, the result is the intersection, and not the union,
+of their separate match results.
+.PP
A content specification consists of a content type and a subtype.
The initial list of \*(lqstandard\*(rq content types and subtypes can
-be found in RFC\-2046.
-.ne 18
+be found in RFC 2046.
+.PP
A list of commonly used contents is briefly reproduced here:
-.sp
+.PP
+.RS 5
.nf
-.in +.5i
.ta \w'application 'u
Type Subtypes
---- --------
image jpeg, gif, png
audio basic
video mpeg
-.re
-.in -.5i
.fi
-.sp
+.RE
+.PP
A legal MIME message must contain a subtype specification.
.PP
To specify a content, regardless of its subtype, just use the
name of the content, e.g., \*(lqaudio\*(rq. To specify a specific
subtype, separate the two with a slash, e.g., \*(lqaudio/basic\*(rq.
-Note that regardless of the values given to the `\-type' switch, a
-multipart content (of any subtype listed above) is always acted upon.
-Further note that if the `\-type' switch is used, and it is desirable to
-act on a message/external-body content, then the `\-type' switch must
-be used twice: once for message/external-body and once for the content
-externally referenced.
-
-.Uh "Unseen Sequence"
-
+Note that regardless of the values given to the
+.B \-type
+switch, a multipart content (of any subtype listed above) is always
+acted upon. Further note that if the
+.B \-type
+switch is used, and it is desirable to act on a message/external-body
+content, then the
+.B \-type
+switch must be used twice: once for message/external-body and once
+for the content externally referenced.
+.PP
+In the absence of
+.BR \-prefer ,
+.B mhshow
+will select the "best" displayable subpart from multipart/alternative
+content. The
+.B \-prefer
+switch can be used (one or more times, in order of ascending
+preference) to let MH know which content types from a
+multipart/alternative MIME part are preferred by the user, in order to
+override the default selection for display. For example, mail is
+often sent containing both plaintext and HTML-formatted versions of
+the same content, and the HTML version is usually indicated to be the
+"best" format for viewing. Using \*(lq-prefer text/plain\*(rq will
+cause the plaintext version to be displayed if possible, but still
+allow display of the HTML part if there is no plaintext subpart
+available. Using \*(lq-prefer text/plain -prefer image/png\*(rq
+would add a preference for PNG images, which might or might not
+ever appear in the same multipart/alternative section with text/plain.
+Implementation note: RFC 2046 requires that the subparts
+of a multipart/alternative be ordered according to "faithfulness to
+the original content", and MH by default selects the subpart ranked
+most "faithful" by that ordering. The
+.B \-prefer
+switch reorders the alternative parts (only internally, never changing
+the message file) to move the user's preferred part(s) to the "most
+faithful" position. Thus, when viewed by
+.BR mhlist ,
+the ordering of multipart/alternative parts will appear to change when
+invoked with or without various
+.B \-prefer
+switches. Since the last of multiple
+.B \-prefer
+options "wins", a
+.B \-prefer
+on the command line will override any in a profile entry.
+.PP
+The
+.B \-noprefer
+switch will cancel any previous
+.B \-prefer
+switches.
+.SS "Unseen Sequence"
If the profile entry \*(lqUnseen\-Sequence\*(rq is present and
-non\-empty, then \fImhshow\fR will remove each of the messages shown
-from each sequence named by the profile entry.
-
-.Uh "Checking the Contents"
-The `\-check' switch tells \fImhshow\fR to check each content for an
-integrity checksum. If a content has such a checksum (specified as a
-Content-MD5 header field), then \fImhshow\fR will attempt to verify the
-integrity of the content.
-
-.Uh "Showing the Contents"
-The headers of each message are displayed with the \fImhlproc\fR
-(usually \fImhl\fR), using the standard format file \fImhl.headers\fR.
-You may specify an alternate format file with the `\-form formfile'
-switch. If the format file \fImhl.null\fR is specified, then the display
-of the message headers is suppressed.
-
+non-empty, then
+.B mhshow
+will remove each of the messages shown from each sequence named by
+the profile entry.
+.SS "Checking the Contents"
+The
+.B \-check
+switch tells
+.B mhshow
+to check each content for an integrity checksum. If a content has such
+a checksum (specified as a Content-MD5 header field), then
+.B mhshow
+will attempt to verify the integrity of the content.
+.SS "Showing the Contents"
+The headers of each message are displayed with the
+.I mhlproc
+(usually
+.BR mhl ),
+using the standard format file,
+.IR mhl.headers .
+You may specify an alternative format file with the
+.B \-form
+.I formfile
+switch. If the format file
+.I mhl.null
+is specified, then the display of the message headers is suppressed.
+.PP
Next, the contents are extracted from the message and are stored in
-a temporary file. Usually, the name of the temporary file the
-word "mhshow" followed by a string of characters. Occasionally,
+a temporary file. Usually, the name of the temporary file is the
+word \*(lqmhshow\*(rq followed by a string of characters. Occasionally,
the method used to display a content (described next), requires that
-the file end in a specific suffix. For example, the \fIsoffice\fR
+the file end in a specific suffix. For example, the
+.B soffice
command (part of the StarOffice package) can be used to display
-MicroSoft Word content, but it uses the suffix to determine how to display
+Microsoft Word content, but it uses the suffix to determine how to display
the file. If no suffix is present, the file is not correctly loaded.
-Similarily, older versions of the \fIgs\fR command append a ".ps" suffix to
-the filename if one was missing. As a result, these cannot be used to read
-the default temporary file.
-
+Similarly, older versions of the
+.B gs
+command append a \*(lq.ps\*(rq suffix to the filename if one was missing.
+As a result, these cannot be used to read the default temporary file.
+.PP
To get around this, your profile can contain lines of the form:
-.sp
-.in +.5i
+.PP
+.RS 5
mhshow-suffix-<type>/<subtype>: <suffix>
-.in -.5i
-.sp
+.RE
+.PP
or
-.sp
-.in +.5i
+.PP
+.RS 5
mhshow-suffix-<type>: <suffix>
-.in -.5i
-.sp
+.RE
+.PP
to specify a suffix which can be automatically added to the temporary
file created for a specific content type. For example, the following
lines might appear in your profile:
-.sp
+.PP
+.RS 5
.nf
-.in +.5i
mhshow-suffix-text: .txt
mhshow-suffix-application/msword: .doc
mhshow-suffix-application/PostScript: .ps
-.in -.5i
.fi
-.sp
+.RE
+.PP
to automatically append a suffix to the temporary files.
-
+.PP
The method used to display the different contents in the messages bodies
will be determined by a \*(lqdisplay string\*(rq. To find the display
-string, \fImhshow\fR will first search your profile for an entry of the
-form:
-.sp
-.in +.5i
+string,
+.B mhshow
+will first search your profile for an entry of the form:
+.PP
+.RS 5
mhshow-show-<type>/<subtype>
-.in -.5i
-.sp
-to determine the display string. If this isn't found, \fImhshow\fR
+.RE
+.PP
+If this isn't found,
+.B mhshow
will search for an entry of the form:
-.sp
-.in +.5i
+.PP
+.RS 5
mhshow-show-<type>
-.in -.5i
-.sp
+.RE
+.PP
to determine the display string.
-
+.PP
If a display string is found, any escapes (given below) will be expanded.
-The result will be executed under \fB/bin/sh\fR, with the standard input
+The result will be executed under \*(lq/bin/sh\*(rq, with the standard input
set to the content.
-.ne 16
+.PP
The display string may contain the following escapes:
-.sp
+.PP
+.RS 5
.nf
-.in +.5i
-.ta \w'%F 'u
-%a Insert parameters from Content-Type field
-%e exclusive execution
-%f Insert filename containing content
-%F %e, %f, and stdin is terminal not content
-%l display listing prior to displaying content
-%p %l, and ask for confirmation
-%s Insert content subtype
-%d Insert content description
-%% Insert the character %
-.re
-.in -.5i
+.ta \w'%F 'u
+%a Insert parameters from Content-Type field
+%{parameter} Insert the parameter value from the Content-Type field
+%f Insert filename containing content
+%F %f, and stdin is terminal not content
+%l display listing prior to displaying content
+%s Insert content subtype
+%d Insert content description
+%% Insert the character %
.fi
-.sp
-.ne 10
-For those display strings containing the e- or F-escape, \fImhshow\fR will
-execute at most one of these at any given time. Although the F-escape
-expands to be the filename containing the content, the e-escape has no
-expansion as far as the shell is concerned.
-
-When the p-escape prompts for confirmation, typing INTR (usually
-control-C) will tell \fImhshow\fR not to display that content.
-The p-escape can be disabled by specifying the switch `\-nopause'.
-Further, when \fImhshow\fR is display a content, typing QUIT (usually
-control-\\) will tell \fImhshow\fR to wrap things up immediately.
-
+.RE
+.PP
+.B mhshow
+will execute at most one display string at any given time, and wait
+for the current display string to finish execution before executing
+the next display string.
+.PP
+The {parameter} escape is typically used in a command line argument
+that should only be present if it has a non-null value. Its value
+will be wrapped with single quotes if the escape is not so wrapped.
+Shell parameter expansion can construct the argument only when it is
+non-null, e.g.,
+.PP
+.RS 5
+.nf
+mhshow-show-text/html: charset=%{charset};
+ w3m ${charset:+-I $charset} -T text/html %F
+.fi
+.RE
+.PP
+That example also shows the use of indentation to signify continuation:
+the two text lines combine to form a single entry. Note that when
+dealing with text that has been converted internally by
+.IR iconv (3),
+the \*(lqcharset\*(rq parameter will reflect the target character set
+of the text, rather than the original character set in the message.
+.PP
Note that if the content being displayed is multipart, but not one of
the subtypes listed above, then the f- and F-escapes expand to multiple
-filenames, one for each subordinate content. Further, stdin is not
+filenames, one for each subordinate content. Furthermore, stdin is not
redirected from the terminal to the content.
-
-If a display string is not found, \fImhshow\fR has several default values:
-.sp
+.PP
+If a display string is not found,
+.B mhshow
+behaves as if these profile entries were supplied and supported:
+.PP
+.RS 5
.nf
-.in +.5i
-mhshow-show-text/plain: %pmoreproc '%F'
-mhshow-show-message/rfc822: %pshow -file '%F'
-.in -.5i
+mhshow-show-text/plain: %lmoreproc %F
+mhshow-show-message/rfc822: %lshow -file %F
.fi
-.sp
+.RE
+.PP
+Note that \*(lqmoreproc\*(rq is not supported in user profile display
+strings.
+.PP
If a subtype of type text doesn't have a profile entry, it will be
treated as text/plain.
-
-\fImhshow\fR has default methods for handling multipart messages of subtype
+.PP
+.B mhshow
+has default methods for handling multipart messages of subtype
mixed, alternative, parallel, and digest. Any unknown subtype of type
multipart (without a profile entry), will be treated as multipart/mixed.
-
-If none of these apply, then \fImhshow\fR will check to see if the message
-has an application/octet-stream content with parameter \*(lqtype=tar\*(rq.
-If so, \fImhshow\fR will use an appropriate command. If not, \fImhshow\fR
+.PP
+If none of these apply, then
+.B mhshow
+will check to see if the message has an application/octet-stream content
+with parameter \*(lqtype=tar\*(rq.
+If so,
+.B mhshow
+will use an appropriate command. If not,
+.B mhshow
will complain.
-
-.ne 10
+.PP
Example entries might be:
-.sp
+.PP
+.RS 5
.nf
-.in +.5i
mhshow-show-audio/basic: raw2audio 2>/dev/null | play
-mhshow-show-image: xv '%f'
+mhshow-show-image: xv %f
mhshow-show-application/PostScript: lpr -Pps
-.in -.5i
.fi
-.sp
-Note that when using the f- or F-escape, it's a good idea to use
-single-quotes around the escape. This prevents misinterpretation by
-the shell of any funny characters that might be present in the filename.
-
-Finally, \fImhshow\fR will process each message serially\0--\0it won't start
-showing the next message until all the commands executed to display the
-current message have terminated. In the case of a multipart content
-(of any subtype listed above), the content contains advice indicating if
-the parts should be displayed serially or in parallel. Because this may
-cause confusion, particularly on uni-window displays, the `\-serialonly'
-switch can be given to tell \fImhshow\fR to never display parts in parallel.
-
-.Uh "Showing Alternate Character Sets"
+.RE
+.PP
+If an f- or F-escape is not quoted with single quotes, its expansion
+will be wrapped with single quotes.
+.PP
+Finally,
+.B mhshow
+will process each message serially\0--\0it won't start showing the next
+message until all the commands executed to display the current message
+have terminated.
+.SS "Showing Alternate Character Sets"
+If
+.B mhshow
+was built with
+.IR iconv (3),
+then all text/plain parts of the message(s) will be displayed using
+the character set of the current locale. See
+.IR mhparam (1)
+for how to determine whether your
+.B nmh
+installation includes
+.IR iconv (3)
+support. To convert text parts other than text/plain, or if
+.B mhshow
+was not built with
+.IR iconv ,
+an external program can be used, as described next.
+.PP
Because a content of type text might be in a non-ASCII character
-set, when \fImhshow\fR encounters a \*(lqcharset\*(rq parameter for
-this content, it checks if your terminal can display this character
-set natively. \fIMhn\fR checks this by examining the the environment
-variable MM_CHARSET. If the value of this environment variable is equal
-to the value of the charset parameter, then \fImhshow\fR assumes it can
-display this content without any additional setup. If this environment
-variable is not set, \fImhshow\fR will assume a value of \*(lqUS-ASCII\*(rq.
-If the character set cannot be displayed natively, then \fImhshow\fR will
-look for an entry of the form:
-.sp
-.in +.5i
+set, when
+.B mhshow
+encounters a \*(lqcharset\*(rq parameter for this content, it checks
+if your terminal can display this character set natively.
+.B mhshow
+checks this by examining the current character set defined by the
+.IR locale (1)
+environment variables. If the value of the locale character set is equal
+to the value of the charset parameter, then
+.B mhshow
+assumes it can
+display this content without any additional setup. If the locale is not
+set properly,
+.B mhshow
+will assume a value of \*(lqUS-ASCII\*(rq.
+If the character set cannot be displayed natively, then
+.B mhshow
+will look for an entry of the form:
+.PP
+.RS 5
mhshow-charset-<charset>
-.in -.5i
-.sp
+.RE
+.PP
which should contain a command creating an environment to render
the character set. This command string should containing a single
\*(lq%s\*(rq, which will be filled-in with the command to display the
content.
-
+.PP
Example entries might be:
-.sp
-.in +.5i
+.PP
+.RS 5
mhshow-charset-iso-8859-1: xterm -fn '-*-*-medium-r-normal-*-*-120-*-*-c-*-iso8859-*' -e %s
-.in -.5i
+.RE
+.PP
or
-.in +.5i
+.PP
+.RS 5
mhshow-charset-iso-8859-1: '%s'
-.in -.5i
-.sp
-The first example tells \fImhshow\fR to start \fIxterm\fR and load the
-appropriate character set for that message content. The second example
-tells \fImhshow\fR that your pager (or other program handling that content
-type) can handle that character set, and that no special processing is
+.RE
+.PP
+The first example tells
+.B mhshow
+to start
+.B xterm
+and load the appropriate character set for that message content.
+The second example
+tells
+.B mhshow
+that your pager (or other program handling that content type) can
+handle that character set, and that no special processing is
needed beforehand.
-.sp
-Note that many pagers strip off the high-order bit or have problems
+.PP
+Note that many pagers strip off the high-order bit, or have problems
displaying text with the high-order bit set. However, the pager
-\fIless\fR has support for single-octet character sets. The source
-to \fIless\fR is available on many ftp sites carrying free software.
-In order to view messages sent in the ISO-8859-1 character set using
-\fIless\fR,
-.ne 9
-put these lines in your \&.login file:
-.sp
+.B less
+has support for single-octet character sets. For example, messages
+encoded in the ISO-8859-1 character set can be viewed using
+.BR less ,
+with these environment variable settings:
+.PP
+.RS 5
.nf
-.in +.5i
-setenv LESSCHARSET latin1
-setenv LESS "-f"
-.in -.5i
+.ta \w'%F 'u
+LESSCHARSET latin1
+LESS -f
.fi
-.sp
-The first line tells \fIless\fR to use the ISO-8859-1 definition for
-determining whether a character is \*(lqnormal\*(rq, \*(lqcontrol\*(lq,
-or \*(lqbinary\*(rq. The second line tells \fIless\fR not to warn you
-if it encounters a file that has non-ASCII characters. Then, simply
-set the \fBmoreproc\fR profile entry to \fIless\fR, and it will get
-called automatically. (To handle other single-octet character sets,
-look at the \fIless\fR\0(1) manual entry for information about the
-\fBLESSCHARDEF\fR environment variable.)
-
-.Uh "Messages of Type message/partial"
-\fImhshow\fR cannot directly display messages of type partial.
-You must reassemble them first into a normal message using
-\fImhstore\fR. Check the man page for \fImhstore\fR for details.
-
-.Uh "External Access"
+.RE
+.PP
+The first setting tells
+.B less
+to use the ISO-8859-1 definition to determine whether a character is
+\*(lqnormal\*(rq, \*(lqcontrol\*(lq, or \*(lqbinary\*(rq.
+The second setting tells
+.B less
+not to warn you if it encounters a file that has non-ASCII characters.
+Then, simply set the
+.I moreproc
+profile entry to
+.BR less ,
+and it will get called automatically. (To handle other single-octet
+character sets, look at the
+.IR less (1)
+manual entry for information about the LESSCHARDEF environment variable.)
+.SS "Messages of Type message/partial"
+.B mhshow
+cannot directly display messages of type partial.
+You must first reassemble them into a normal message using
+.BR mhstore .
+Check
+.IR mhstore (1)
+for details.
+.SS "External Access"
For contents of type message/external-body,
-.ne 12
-\fImhshow\fR supports these access-types:
-.sp
-.nf
-.in +.5i
+.B mhshow
+supports these access-types:
+.IP \(bu 4
afs
+.IP \(bu 4
anon-ftp
+.IP \(bu 4
ftp
+.IP \(bu 4
local-file
+.IP \(bu 4
mail-server
-.in -.5i
-.fi
-.sp
+.IP \(bu 4
+url
+.PP
For the \*(lqanon-ftp\*(rq and \*(lqftp\*(rq access types,
-\fImhshow\fR will look for the \fBnmh-access-ftp\fR
-profile entry,
-.ne 6
-e.g.,
-.sp
-.in +.5i
+.B mhshow
+will look for the \*(lqnmh-access-ftp\*(rq profile entry, e.g.,
+.PP
+.RS 5
nmh-access-ftp: myftp.sh
-.in -.5i
-.sp
+.RE
+.PP
to determine the pathname of a program to perform the FTP retrieval.
-.ne 14
+.PP
This program is invoked with these arguments:
-.sp
+.PP
+.RS 5
.nf
-.in +.5i
domain name of FTP-site
username
password
remote filename
local filename
\*(lqascii\*(rq or \*(lqbinary\*(rq
-.in -.5i
.fi
-.sp
+.RE
+.PP
The program should terminate with an exit status of zero if the
retrieval is successful, and a non-zero exit status otherwise.
-
-If this entry is not provided, then \fImhshow\fR will use a simple
-built-in FTP client to perform the retrieval.
-
-.Uh "The Content Cache"
-When \fImhshow\fR encounters an external content containing a
-\*(lqContent-ID:\*(rq field, and if the content allows caching, then
-depending on the caching behavior of \fImhshow\fR, the content might be
-read from or written to a cache.
-
-The caching behavior of \fImhshow\fR is controlled with the `\-rcache'
-and `\-wcache' switches, which define the policy for reading from,
-and writing to, the cache, respectively. One of four policies may be
-specified: \*(lqpublic\*(rq, indicating that \fImhshow\fR should make use
-of a publically-accessible content cache; \*(lqprivate\*(rq, indicating
-that \fImhshow\fR should make use of the user's private content cache;
-\*(lqnever\*(rq, indicating that \fImhshow\fR should never make use of
-caching; and, \*(lqask\*(rq, indicating that \fImhshow\fR should ask
-the user.
-
+.PP
+For the \*(lqurl\*(rq access-type,
+.B mhshow
+will look for the \*(lqnmh-access-url\*(rq profile entry. See
+.IR mhstore (1)
+for more details.
+.SS "The Content Cache"
+When
+.B mhshow
+encounters an external content containing a \*(lqContent-ID:\*(rq field,
+and if the content allows caching, then depending on the caching behavior of
+.BR mhshow ,
+the content might be read from or written to a cache.
+.PP
+The caching behavior of
+.B mhshow
+is controlled with the
+.B \-rcache
+and
+.B \-wcache
+switches, which define the policy for reading from, and writing to, the cache,
+respectively. One of four policies may be specified: \*(lqpublic\*(rq,
+indicating that
+.B mhshow
+should make use of a publicly-accessible content cache; \*(lqprivate\*(rq,
+indicating that
+.B mhshow
+should make use of the user's private content cache;
+\*(lqnever\*(rq, indicating that
+.B mhshow
+should never make use of caching; and, \*(lqask\*(rq, indicating that
+.B mhshow
+should ask the user.
+.PP
There are two directories where contents may be cached: the profile entry
-\fBnmh-cache\fR names a directory containing world-readable contents, and,
-the profile entry \fBnmh-private-cache\fR names a directory containing
-private contents. The former should be an absolute (rooted) directory
-name.
-.ne 6
+\*(lqnmh-cache\*(rq names a directory containing world-readable contents, and,
+the profile entry \*(lqnmh-private-cache\*(rq names a directory containing
+private contents. The former should be an absolute (rooted) directory name.
+.PP
For example,
-.sp
-.in +.5i
+.PP
+.RS 5
nmh-cache: /tmp
-.in -.5i
-.sp
+.RE
+.PP
might be used if you didn't care that the cache got wiped after each
reboot of the system. The latter is interpreted relative to the user's
-nmh directory, if not rooted,
-.ne 6
-e.g.,
-.sp
-.in +.5i
+nmh directory, if not rooted, e.g.,
+.PP
+.RS 5
nmh-private-cache: .cache
-.in -.5i
-.sp
+.RE
+.PP
(which is the default value).
-
-.Uh "User Environment"
-Because the display environment in which \fImhshow\fR operates may vary for
-different machines, \fImhshow\fR will look for the environment variable
-\fB$MHSHOW\fR. If present, this specifies the name of an additional
-user profile which should be read. Hence, when a user logs in on a
-particular display device, this environment variable should be set to
-refer to a file containing definitions useful for the given display device.
+.SS "User Environment"
+Because the display environment in which
+.B mhshow
+operates may vary for different machines,
+.B mhshow
+will look for the environment variable MHSHOW. If present, this specifies
+the name of an additional user profile which should be read.
+Hence, when a user logs in on a particular display device, this environment
+variable should be set to refer to a file containing definitions useful
+for the given display device.
Normally, only entries that deal with the methods to display different
content type and subtypes
-.sp
-.in +.5i
+.PP
+.RS 5
+.nf
mhshow-show-<type>/<subtype>
-.br
mhshow-show-<type>
-.in -.5i
-.sp
-need be present in this additional profile.
-Finally,
-\fImhshow\fR will attempt to consult one other additional user profile,
-.ne 6
-e.g.,
-.sp
-.in +.5i
-%etcdir%/mhn.defaults
-.in -.5i
-.sp
-which is created automatically during nmh installation.
-.Fi
-^$HOME/\&.mh\(ruprofile~^The user profile
+.fi
+.RE
+.PP
+need be present in this additional profile. Finally,
+.B mhshow
+will attempt to consult
+.PP
+.RS 5
+%nmhetcdir%/mhn.defaults
+.RE
+.PP
+which is created automatically during
+.B nmh
+installation.
+.PP
+See "Profile Lookup" in
+.IR mh-profile (5)
+for the profile search order, and for how duplicate entries are treated.
+.SS Content-Type Marker
+.B mhshow
+will display a marker containing information about the part being displayed
+next. The default marker can be changed using the
+.B \-markform
+switch to specify a file containing
+.IR mh\-format (5)
+instructions to use when displaying the content marker. A copy of the
+default markform can be found in %nmhetcdir%/mhshow.marker, for
+reference. In addition to the normal set of
+.IR mh\-format (5)
+instructions, the following
+.I component
+escapes are supported:
+.PP
+.RS 5
+.nf
+.ta \w'cdispo-<PARAM> 'u +\w'Returns 'u
+.I "Escape Returns Description"
+part string MIME part number
+content\-type string MIME Content\-Type of part
+description string Content\-Description header
+disposition string Content disposition (attachment or inline)
+ctype-<PARAM> string Value of <PARAM> from Content\-Type header
+cdispo-<PARAM> string Value of <PARAM> from
+ Content\-Disposition header
+%(size) integer The size of the decoded part, in bytes
+%(unseen) boolean Returns true for suppressed parts
+.fi
+In this context, the %(unseen) function indicates whether
+.B mhshow
+has decided to not display a particular part due to the
+.B \-textonly
+or
+.B \-inlineonly
+switches.
+.RE
+All MIME parameters and the \*(lqContent-Description\*(rq header will have
+RFC 2231 decoding applied and be converted to the local character set.
+.SH FILES
+.B mhshow
+looks for all format files and mhn.defaults in multiple locations:
+absolute pathnames are accessed directly, tilde expansion is done on
+usernames, and files are searched for in the user's
+.I Mail
+directory, as specified in their profile. If not found there, the directory
+.RI \*(lq %nmhetcdir% \*(rq
+is checked.
+.PP
+.fc ^ ~
+.nf
+.ta \w'%nmhetcdir%/ExtraBigFileName 'u
+^$HOME/.mh_profile~^The user profile
^$MHSHOW~^Additional profile entries
-^%etcdir%/mhn.defaults~^System default MIME profile entries
-^%etcdir%/mhl.headers~^The headers template
-.Pr
+^%nmhetcdir%/mhn.defaults~^System default MIME profile entries
+^%nmhetcdir%/mhl.headers~^The headers template
+^%nmhetcdir%/mhshow.marker~^Example content marker
+^%nmhetcdir%/mhshow.header~^Example message separator header
+.fi
+.SH "PROFILE COMPONENTS"
+.fc ^ ~
+.nf
+.ta 2.4i
+.ta \w'ExtraBigProfileName 'u
^Path:~^To determine the user's nmh directory
-.Ps
^Current\-Folder:~^To find the default current folder
-.Ps
^Unseen\-Sequence:~^To name sequences denoting unseen messages
-.Ps
^mhlproc:~^Default program to display message headers
-.Ps
^nmh-access-ftp:~^Program to retrieve contents via FTP
-.Ps
+^nmh-access-url:~^Program to retrieve contents via HTTP
^nmh-cache~^Public directory to store cached external contents
-.Ps
^nmh-private-cache~^Personal directory to store cached external contents
-.Ps
^mhshow-charset-<charset>~^Template for environment to render character sets
-.Ps
^mhshow-show-<type>*~^Template for displaying contents
-.Ps
^moreproc:~^Default program to display text/plain content
-.Sa
-mhbuild(1), mhl(1), mhlist(1), mhstore(1), sendfiles(1)
-.br
-RFC\-934:
-.br
- \fIProposed Standard for Message Encapsulation\fR,
-.br
-RFC\-2045:
-.br
- \fIMultipurpose Internet Mail Extensions (MIME) Part One:
-.br
- Format of Internet Message Bodies\fR,
-.br
-RFC\-2046:
-.br
- \fIMultipurpose Internet Mail Extensions (MIME) Part Two:
-.br
- Media Types\fR,
-.br
-RFC\-2047:
-.br
- \fIMultipurpose Internet Mail Extensions (MIME) Part Three:
-.br
- Message Header Extensions for Non-ASCII Text\fR,
-.br
-RFC\-2048:
-.br
- \fIMultipurpose Internet Mail Extensions (MIME) Part Four:
-.br
- Registration Procedures\fR,
-.br
-RFC\-2049:
-.br
- \fIMultipurpose Internet Mail Extensions (MIME) Part Five:
-.br
- Conformance Criteria and Examples\fR.
-.De
-`+folder' defaults to the current folder
-.Ds
-`msgs' defaults to cur
-.Ds
-`\-nocheck'
-.Ds
-`\-form mhl.headers'
-.Ds
-`\-pause'
-.Ds
-`\-rcache ask'
-.Ds
-`\-realsize'
-.Ds
-`\-noserialonly'
-.Ds
-`\-noverbose'
-.Ds
-`\-wcache ask'
-.Co
+.fi
+.SH "SEE ALSO"
+.IR iconv (3),
+.IR mhbuild (1),
+.IR mhl (1),
+.IR mhlist (1),
+.IR mhparam (1),
+.IR mhstore (1),
+.IR sendfiles (1)
+.SH DEFAULTS
+.nf
+.RB ` +folder "' defaults to the current folder"
+.RB ` msgs "' defaults to cur"
+.RB ` \-nocheck '
+.RB ` \-concat '
+.RB ` \-textonly '
+.RB ` \-inlineonly '
+.RB ` \-form\ mhl.headers '
+.RB ` \-rcache\ ask '
+.RB ` \-wcache\ ask '
+.fi
+.SH CONTEXT
If a folder is given, it will become the current folder. The last
message selected will become the current message.
-.En
projects / nmh / blobdiff