Garbage collect unused code.

[nmh] / man / mhbuild.man

diff --git a/man/mhbuild.man b/man/mhbuild.man
index 6510b12b545dcbdfa7a3680d856325737a9b37fc..abd9dcbca88cb0caeb3fe8c9a08877f38fbe44fb 100644 (file)
--- a/man/mhbuild.man
+++ b/man/mhbuild.man
@@ -9,6 +9,7 @@ mhbuild \- translate MIME composition draft
 .HP 5
 .B mhbuild
 .I file
+.RB [ \-auto " | " \-noauto ]
 .RB [ \-list " | " \-nolist ]
 .RB [ \-realsize " | " \-norealsize ]
 .RB [ \-headers " | " \-noheaders ]
@@ -17,6 +18,10 @@ mhbuild \- translate MIME composition draft
 .RB [ \-contentid " | " \-nocontentid ]
 .RB [ \-verbose " | " \-noverbose ]
 .RB [ \-check " | " \-nocheck ]
+.RB [ \-headerencoding 
+.IR encoding\-algorithm
+.RB " | " \-autoheaderencoding ]
+.RB [ \-dist ]
 .RB [ \-version ]
 .RB [ \-help ]
 .ad
@@ -27,12 +32,9 @@ command will translate a MIME composition draft into
 a valid MIME message.
 .PP
 .B mhbuild
-creates multi-media messages as specified in RFC\-2045
-to RFC\-2049.  Currently
-.B mhbuild
-only supports encodings in
-message bodies, and does not support the encoding of message headers as
-specified in RFC\-2047.
+creates multi-media messages as specified in RFC 2045
+to RFC 2049.  This includes the encoding of message headers as specified
+by RFC 2047.
 .PP
 If you specify the name of the composition file as \*(lq-\*(rq,
 then
@@ -281,7 +283,7 @@ would be as follows:
 .fi
 .RE
 .PP
-Any long URLs will be wrapped according to RFC\-2017 rules.
+Any long URLs will be wrapped according to RFC 2017 rules.
 .PP
 The \*(lqmessage\*(rq directive (#forw) is used to specify a message or
 group of messages to include.  You may optionally specify the name of
@@ -291,7 +293,7 @@ given, it defaults to the current message.  Hence, the message directive
 is similar to the
 .B forw
 command, except that the former uses
-the MIME rules for encapsulation rather than those specified in RFC\-934.
+the MIME rules for encapsulation rather than those specified in RFC 934.
 For example,
 .PP
 .RS 5
@@ -314,8 +316,8 @@ switch.  This switch will indicate that
 .B mhbuild
 should attempt to utilize the MIME encapsulation rules
 in such a way that the \*(lqmultipart/digest\*(rq that is created
-is (mostly) compatible with the encapsulation specified in RFC\-934.
-If given, then RFC\-934 compliant user-agents should be able to burst the
+is (mostly) compatible with the encapsulation specified in RFC 934.
+If given, then RFC 934 compliant user-agents should be able to burst the
 message on reception\0--\0providing that the messages being encapsulated
 do not contain encapsulated messages themselves.  The drawback of this
 approach is that the encapsulations are generated by placing an extra
@@ -454,6 +456,19 @@ If a text content contains only 7\-bit characters and the character set
 is not specified as above, then the character set will be labeled as
 \*(lqus-ascii\*(rq.
 .PP
+The
+.B \-headerencoding
+switch will indicate which algorithm to use when encoding any message headers
+that contain 8\-bit characters.  The valid arguments are
+.I base64
+for based\-64 encoding and 
+.I quoted
+for quoted\-printable encoding.  The
+.B \-autoheaderencoding
+switch will instruct
+.B mhbuild
+to automatically pick the algorithm that results in a shorter encoded string.
+.PP
 Putting this all together,
 here is an example of a more complicated message draft.  The
 following draft will expand into a multipart/mixed message
@@ -532,19 +547,13 @@ to execute
 .B mhbuild
 to translate the composition file into MIME format.
 .PP
-It is also possible to have the
-.B whatnow
-program invoke
+Normally it is an error to invoke
 .B mhbuild
-automatically when a message is sent.  To do this, you must add the line
-.PP
-.RS 5
-automimeproc: 1
-.RE
-.PP
-to your
-.I \&.mh\(ruprofile
-file.
+on file that already in MIME format.  The 
+.B \-auto
+switch will cause
+.B mhbuild
+to exit without error if the input file already has valid MIME headers.
 .PP
 Finally, you should consider adding this line to your profile:
 .PP
@@ -563,6 +572,14 @@ What now? list
 .RE
 .PP
 will work as you expect.
+.PP
+The
+.B \-dist
+switch is intended to be used by
+.BR dist .
+It will cause mhbuild to not generate any MIME headers in the composition
+file (such as \*(lqMIME-Version\*(rq or \*(lqContent-Type\*(rq), but it
+will still encode message headers according to RFC 2047.
 .SS "User Environment"
 Because the environment in which
 .B mhbuild
@@ -685,27 +702,27 @@ is checked.
 .IR mhstore (1)
 .PP
 .I "Proposed Standard for Message Encapsulation"
-(RFC\-934),
+(RFC 934),
 .PP
 .I "The Content-MD5 Header Field"
-(RFC\-1864),
+(RFC 1864),
 .PP
 .I "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies"
-(RFC\-2045),
+(RFC 2045),
 .PP
 .I "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types"
-(RFC\-2046),
+(RFC 2046),
 .PP
 .I "Multipurpose Internet Mail Extensions (MIME) Part Three: Message Header Extensions for Non-ASCII Text"
-(RFC\-2047),
+(RFC 2047),
 .PP
 .I "Multipurpose Internet Mail Extensions (MIME) Part Four: Registration Procedures"
-(RFC\-2048),
+(RFC 2048),
 .PP
 .I "Multipurpose Internet Mail Extensions (MIME) Part Five: Conformance Criteria and Examples"
-(RFC\-2049)
+(RFC 2049)
 .I "Definition of the URL MIME External-Body Access-Type"
-(RRC\-2017)
+(RFC 2017)
 .SH DEFAULTS
 .nf
 .RB ` \-headers '
@@ -714,4 +731,5 @@ is checked.
 .RB ` \-contentid '
 .RB ` \-nocheck '
 .RB ` \-noverbose '
+.RB ` \-autoheaderencoding '
 .fi