NEW FEATURES
------------
-- All nmh programs will now warn about multiple profile entries for
- the same non-null, non-comment component. In previous versions, all
- but the first were silently ignored.
-- mhmail now supports all post(8) options, or optionally can use
- send(1) with all of its options. Its formerly undocumented -resent
- switch has been documented. And it has new -attach, -headerfield,
- and -send/-nosend switches.
-- Default to flock() locking on OpenBSD and Darwin.
-- Added -directives support to mhbuild(1) to control whether or not
- mhbuild will honor MIME directives by default. And added support
- for special #on/#off/#pop directives to control the MIME directive
- processing state.
-- Added -messageid switch to send(1) and post(8). This allows
- selection of the style to use for generated Message-ID and
- Content-ID header fields. The default localname style is
- pid.time@localname, where time is in seconds, and matches previous
- behavior. The random style replaces the localname with some
- (pseudo)random bytes and uses microsecond-resolution time.
-- Added -clobber switch to mhstore(1) to control overwriting of
- existing files.
+- builds use OpenSSL if available.
+- post now defaults to port 587 on 'smtp' message submission.
+- A value of 0 for the width switch of scan(1), inc(1), ap(1), dp(1),
+ fmttest(1), and mhl(1) now means as many characters as the format
+ engine can produce [Bug #15274]. That amount is limited by internal
+ buffers.
+- If a component has trailing whitespace, e.g., body:component="> ",
+ mhl now trims that whitespace off when filtering blank text lines.
+- An "rtrim" flag has been added to mhl to remove any trailing
+ whitespace from filtered text lines. A corresponding "nortrim" flag
+ has also been added.
+- The default locations for configuration files and suppoooort binaries
+ have been changed. Configuration files now install into ${sysconfdir}/nmh,
+ and support binaries are placed in ${libexecdir}/nmh. If you are upgrading
+ an existing installation you should look for old configuration files in
+ ${sysconfdir} and merge any local customizations into the new files in
+ ${sysconfdir}/nmh, then remove the old files. ${libdir} will also contain
+ obsolete support programs that should be removed.
+- When building from source, configure will derive ${prefix} from an existing
+ nmh installation if it finds one in your $PATH.
+- Added getmymbox and getmyaddr mh-format(5) function escapes.
+- New -[no]changecur, -fixtype, -decodetypes, and -[no]crlflinebreaks switches
+ have been added to mhfixmsg(1).
+- mhfixmsg now removes an extraneous trailing semicolon from header
+ parameter lists.
+- Added -convertargs switch to repl(1), to pass arguments to programs
+ specified in the user's profile or mhn.defaults to convert message
+ content.
+- Added mhical(1), to display, reply to, and cancel iCalendar (RFC 5545)
+ event requests.
+- added multiply format function
+- "mhparam bindir" prints the path to the directory containing the public
+ executables (${bindir}).
+- new "-prefer" switch for mhshow (and mhlist and mhshow), to allow specifying
+ the preferred content types to show, if present in a multipart alternative.
+- mh-format now has %(kilo) and %(kibi) functions, to allow printing
+ numbers as, for example, "10K", or "2.3Mi"
+- Support for the -sendmail flag to send/post to change the sendmail
+ binary when using the sendmail/pipe MTS.
+- Added support to send(1) to specify switches to post(1) based on address or
+ domain name in From: header line in message draft.
+- post(8) -snoop now attempts to decode base64-encoded SMTP traffic.
+- folder(1) -nocreate now prints a warning message for a non-existent folder.
+- mhfixmsg(1) now allows -decodetext binary, though 8bit is still the default.
+- inc(1) and msgchk(1) now support TLS encryption natively.
+- All TLS connections now perform certificate validation (including hostname
+ matching) by default; can be disabled on a per-application basis.
+- Support for SMTPUTF8 (RFC 6531) has been added. mhshow(1) already supported
+ RFC 6532, assuming all 8-bit message header field bodies are UTF-8 and use
+ of a UTF-8 locale.
+- mhfixmsg now replaces RFC 2047 encoding with RFC 2231 encoding of name and
+ filename parameters in Content-Type and Content-Disposition headers,
+ respectively.
+- If a message body contains 8-bit bytes, post(8) uses SMTP 8BITMIME if the
+ server supports it. If not, post fails with a message to the user to
+ encode the message for 7-bit transport.
+- Added welcome message when nmh detects that its version changed.
+- Fewer lseek(2)s will be used when reading headers in the common case.
+- Single-character headers can be reliably formatted, etc., instead of
+ apparently being missing.
+- ./configure's --enable-debug has been removed; it did nothing.
+- configure now defaults to enabling each of TLS and Cyrus SASL if the
+ necessary headers and libraries are found.
+- Moved build_nmh to top-level directory.
+- Better error reporting for connections to network services
-----------------------------
-OBSOLETE/DEPRECATED FEATURES
-----------------------------
+-----------------
+OBSOLETE FEATURES
+-----------------
-- Changed exit status of each nmh command's -version and -help
- switches from 1 to 0.
-- The following environment variables were deprecated in nmh 1.5
- and removed from this release:
- MHPOPDEBUG (use -snoop command line switch instead)
- MM_NOASK (use -nolist and -nopause command line switches instead)
- NOMHNPROC (use -nocheckmime command line switch instead)
- FACEPROC (undocumented faceproc feature removed)
-- Changed repl and dist default to -noatfile. The default of -atfile
- was deprecated in nmh 1.5. If there are no requests to maintain
- -atfile, it will be removed in the future.
-- The undocumented -queue switch to mhmail has been removed.
-- The undocumented -queue switch to post is deprecated/obsolete
- and will be removed in the next release. It supports the
- SMTP XQUE verb, which is obsolete according to
- http://smtpfilter.sourceforge.net/esmtp.html
-- conflict(8) is deprecated and will be removed from the next release.
-- mhtest(8) is deprecated and will be removed from the next release.
-- spost(8) has been merged into post(8). Its functionality is enabled
- by selecting the sendmail/pipe mail transport method, described in
- the mh-tailor(5) man page. The spost -noalias, -backup/-nobackup,
- -push/-nopush, and -remove/-noremove switches are not supported by
- post. Note that spost did not support -whom or Dcc, and neither
- does post when using sendmail/pipe. For backward compatibility,
- spost has been replaced by a simple shell script that exec's
- post -mts sendmail/pipe.
+- The undocumented -queue switch to post was deprecated in nmh 1.6, and was
+ removed in this release.
+- conflict(8) was deprecated in nmh 1.6, and was removed in this release.
+- mhtest(8) was deprecated in nmh 1.6, and was removed in this release.
+- msh(1) was deprecated in nmh 1.6, and was removed in this release.
+- Support in alias files for the the "*" address-group (everyone) was
+ deprecated in nmh 1.6, and was removed in this release.
+- Support for multiple hostnames in the "servers" entry of mts.conf has
+ been removed.
+
+-------------------
+DEPRECATED FEATURES
+-------------------
+
+- Support for the MHPDEBUG environment variable is deprecated and will be
+ removed from a future nmh release. Instead, use the -debug switch to pick.
+- With the move of support binaries from ${libdir} to ${libexecdir}/nmh, the
+ mostly undocumented 'libdir' mhparam(1) component has been replaced by a
+ new 'libexecdir' component. 'libdir' will be removed in a future release.
---------
BUG FIXES
---------
-- Replaced utilities that operate on pbm files with those that operate
- on pnm files in etc/mhn.defaults [Bug #15152].
-- Removed obsolete BUGS section at end of rcvstore(1) man page [Bug #4361].
-- Fixed -nocc me doesn't account for Alternate-Mailboxes [Bug #36635].
-- Propagate Mail-Followup-To [Bug #5571].
+- The format scanner no longer subtracts 1 from the width. This has the
+ effect of no longer counting the trailing newline in the output of
+ scan(1), inc(1), and the other programs that rely on the format scanner.
+- The first character of some very short (less than 4 characters) message
+ bodies is no longer dropped.
+- mhfixmsg now adds a Content-Transfer-Encoding header at the message level,
+ if needed after decoding text parts.
+- mhbuild now checks whether all text parts need a Content-Transfer-Encoding
+ header, not just those with a character set not specified.
+- mhbuild no longer parses lines that start with # as directives with
+ -nodirectives.
+- repl now make sure that any Fcc header in a replied-to message is not
+ copied into the outgoing draft by default, and that the -fcc switch
+ actually works in the absence of a Fcc header in the replied-to message.
+- A Content-ID is generated for message/external-body entities as required
+ by RFC 2045, even if -nocontentid is supplied to mhbuild.
projects / nmh / blobdiff