X-Git-Url: https://diplodocus.org/git/nmh/blobdiff_plain/b776e28b89aa117da6d93888813aa52b2c292d02..4d0e01fe1da830a6e8fdf13bd6bc21603642d5da:/h/prototypes.h

diff --git a/h/prototypes.h b/h/prototypes.h
index e94bee36..3797fecc 100644
--- a/h/prototypes.h
+++ b/h/prototypes.h
@@ -207,11 +207,61 @@ void seq_setprev (struct msgs *);
 void seq_setunseen (struct msgs *, int);
 int showfile (char **, char *);
 int smatch(char *, struct swit *);
-char *snprintb (char *, size_t, unsigned, char *);
+
+/*
+ * Convert a set of bit flags to printable format.
+ *
+ * Arguments:
+ *
+ * buffer	- Buffer to output string to.
+ * size		- Size of buffer in bytes.  Buffer is always NUL terminated.
+ * flags	- Binary flags to output
+ * bitfield	- Textual representation of bits to output.  This string
+ *		  is in the following format:
+ *
+ *	Option byte 0x01 STRING1 0x02 STRING2 ....
+ *
+ * The first byte is an option byte to snprintb().  Currently the only option
+ * supported is 0x08, which indicates that the flags should be output in
+ * octal format; if the option byte is any other value, the flags will be
+ * output in hexadecimal.
+ *
+ * After the option bytes are series of text strings, prefixed by the number
+ * of the bit they correspond to.  For example, the bitfield string:
+ *
+ *	"\020\01FLAG1\02FLAG2\03FLAG3\04FLAG4"
+ *
+ * will output the following string if "flags" is set to 0x09:
+ *
+ *	0x2<FLAG1,FLAG4>
+ *
+ * You don't have to use octal in the bitfield string, that's just the
+ * convention currently used by the nmh code.  The order of flags in the
+ * bitfield string is not significant, but again, general convention is
+ * from least significant bit to most significant.
+ */
+char *snprintb (char *buffer, size_t size, unsigned flags, char *bitfield);
 int ssequal (char *, char *);
 int stringdex (char *, char *);
 char *trimcpy (char *);
 int unputenv (char *);
+
+/*
+ * Remove quotes and quoted-pair sequences from RFC-5322 atoms.
+ *
+ * Currently the actual algorithm is simpler than it technically should
+ * be: any quotes are simply eaten, unless they're preceded by the escape
+ * character (\).  This seems to be sufficient for our needs for now.
+ *
+ * Arguments:
+ *
+ * input	- The input string
+ * output	- The output string; is assumed to have at least as much
+ *		  room as the input string.  At worst the output string will
+ *		  be the same size as the input string; it might be smaller.
+ *
+ */
+void unquote_string(const char *input, char *output);
 int uprf (char *, char *);
 int vfgets (FILE *, char **);
 char *write_charset_8bit (void);
@@ -250,6 +300,7 @@ int what_now (char *, int, int, char *, char *,
 int WhatNow(int, char **);
 int writeBase64aux(FILE *, FILE *);
 int writeBase64 (unsigned char *, size_t, unsigned char *);
+int writeBase64raw (unsigned char *, size_t, unsigned char *);
 
 /*
  * credentials management