+void
+netsec_set_timeout(netsec_context *nsc, int timeout)
+{
+ nsc->ns_timeout = timeout;
+}
+
+/*
+ * Read data from the network. Basically, return anything in our buffer,
+ * otherwise fill from the network.
+ */
+
+ssize_t
+netsec_read(netsec_context *nsc, void *buffer, size_t size, char **errstr)
+{
+ int retlen;
+
+ /*
+ * If our buffer is empty, then we should fill it now
+ */
+
+ if (nsc->ns_inbuflen == 0) {
+ if (netsec_fillread(nsc, errstr) != OK)
+ return NOTOK;
+ }
+
+ /*
+ * netsec_fillread only returns if the buffer is full, so we can
+ * assume here that this has something in it.
+ */
+
+ retlen = size > nsc->ns_inbuflen ? nsc->ns_inbuflen : size;
+
+ memcpy(buffer, nsc->ns_inptr, retlen);
+
+ if (retlen == (int) nsc->ns_inbuflen) {
+ /*
+ * We've emptied our buffer, so reset everything.
+ */
+ nsc->ns_inptr = nsc->ns_inbuffer;
+ nsc->ns_inbuflen = 0;
+ } else {
+ nsc->ns_inptr += size;
+ nsc->ns_inbuflen -= size;
+ }
+
+ return OK;
+}
+
+/*
+ * Get a "line" (CR/LF) terminated from the network.
+ *
+ * Okay, we play some games here, so pay attention:
+ *
+ * - Unlike every other function, we return a pointer to the
+ * existing buffer. This pointer is valid until you call another
+ * read functiona again.
+ * - We NUL-terminated the buffer right at the end, before the terminator.
+ * - Technically we look for a LF; if we find a CR right before it, then
+ * we back up one.
+ * - If your data may contain embedded NULs, this won't work.
+ */
+
+char *
+netsec_readline(netsec_context *nsc, char **errstr)
+{
+ unsigned char *ptr = nsc->ns_inptr;
+ size_t count = 0, offset;
+
+retry:
+ /*
+ * Search through our existing buffer for a LF
+ */
+
+ while (count < nsc->ns_inbuflen) {
+ count++;
+ if (*ptr++ == '\n') {
+ char *sptr = nsc->ns_inptr;
+ if (count > 1 && *(ptr - 2) == '\r')
+ ptr--;
+ *--ptr = '\0';
+ nsc->ns_inptr += count;
+ nsc->ns_inbuflen -= count;
+ return sptr;
+ }
+ }
+
+ /*
+ * Hm, we didn't find a \n. If we've already searched half of the input
+ * buffer, return an error.
+ */
+
+ if (count >= nsc->ns_inbufsize / 2) {
+ netsec_err(errstr, "Unable to find a line terminator after %d bytes",
+ count);
+ return NULL;
+ }
+
+ /*
+ * Okay, get some more network data. This may move inptr, so regenerate
+ * our ptr value;
+ */
+
+ offset = ptr - nsc->ns_inptr;
+
+ if (netsec_fillread(nsc, errstr) != OK)
+ return NOTOK;
+
+ ptr = nsc->ns_inptr + offset;
+
+ goto retry;
+
+ return NULL; /* Should never reach this */
+}
+
+/*
+ * Fill our read buffer with some data from the network.
+ */
+
+static int
+netsec_fillread(netsec_context *nsc, char **errstr)
+{
+ unsigned char *end;
+ char *readbuf;
+ size_t readbufsize, remaining, startoffset;
+ int rc;
+
+ /*
+ * If inbuflen is zero, that means the buffer has been emptied
+ * completely. In that case move inptr back to the start.
+ */
+
+ if (nsc->ns_inbuflen == 0) {
+ nsc->ns_inptr = nsc->ns_inbuffer;
+ }
+
+retry:
+ /*
+ * If we are using TLS and there's anything pending, then skip the
+ * select call
+ */
+#ifdef TLS_SUPPORT
+ if (!nsc->tls_active || BIO_pending(nsc->ssl_io) == 0)
+#endif /* TLS_SUPPORT */
+ {
+ struct timeval tv;
+ fd_set rfds;
+
+ FD_ZERO(&rfds);
+ FD_SET(nsc->ns_fd, &rfds);
+
+ tv.tv_sec = nsc->ns_timeout;
+ tv.tv_usec = 0;
+
+ rc = select(nsc->ns_fd + 1, &rfds, NULL, NULL, &tv);
+
+ if (rc == -1) {
+ netsec_err(errstr, "select() while reading failed: %s",
+ strerror(errno));
+ return NOTOK;
+ }
+
+ if (rc == 0) {
+ netsec_err(errstr, "read() timed out after %d seconds",
+ nsc->ns_timeout);
+ return NOTOK;
+ }
+
+ /*
+ * At this point, we know that rc is 1, so there's not even any
+ * point to check to see if our descriptor is set in rfds.
+ */
+ }
+
+ startoffset = nsc->ns_inptr - nsc->ns_inbuffer;
+ remaining = nsc->ns_inbufsize - (startoffset + nsc->ns_inbuflen);
+ end = nsc->ns_inptr + nsc->ns_inbuflen;
+
+ /*
+ * If we are using TLS, then just read via the BIO. But we still
+ * use our local buffer.
+ */
+#ifdef TLS_SUPPORT
+ if (nsc->tls_active) {
+ rc = BIO_read(nsc->ssl_io, end, remaining);
+ if (rc == 0) {
+ /*
+ * Either EOF, or possibly an error. Either way, it was probably
+ * unexpected, so treat as error.
+ */
+ netsec_err(errstr, "TLS peer aborted connection");
+ return NOTOK;
+ } else if (rc < 0) {
+ /* Definitely an error */
+ netsec_err(errstr, "Read on TLS connection failed: %s",
+ ERR_error_string(ERR_get_error(), NULL));
+ return NOTOK;
+ }
+
+ nsc->ns_inbuflen += rc;
+
+ return OK;
+ }
+#endif /* TLS_SUPPORT */
+
+ /*
+ * Okay, time to read some data. Either we're just doing it straight
+ * or we're passing it through sasl_decode() first.
+ */
+
+#ifdef CYRUS_SASL
+ if (nsc->sasl_seclayer) {
+ readbuf = nsc->sasl_tmpbuf;
+ readbufsize = nsc->sasl_maxbufsize;
+ } else
+#endif /* CYRUS_SASL */
+ {
+ readbuf = (char *) end;
+ readbufsize = remaining;
+ }
+
+ /*
+ * At this point, we should have active data on the connection (see
+ * select() above) so this read SHOULDN'T block. Hopefully.
+ */
+
+ rc = read(nsc->ns_fd, readbuf, readbufsize);
+
+ if (rc == 0) {
+ netsec_err(errstr, "Received EOF on network read");
+ return NOTOK;
+ }
+
+ if (rc < 0) {
+ netsec_err(errstr, "Network read failed: %s", strerror(errno));
+ return NOTOK;
+ }
+
+ /*
+ * Okay, so we've had a successful read. If we are doing SASL security
+ * layers, pass this through sasl_decode(). sasl_decode() can return
+ * 0 bytes decoded; if that happens, jump back to the beginning. Otherwise
+ * we can just update our length pointer.
+ */
+
+#ifdef CYRUS_SASL
+ if (nsc->sasl_seclayer) {
+ const char *tmpout;
+ unsigned int tmpoutlen;
+
+ rc = sasl_decode(nsc->sasl_conn, nsc->sasl_tmpbuf, rc,
+ &tmpout, &tmpoutlen);
+
+ if (rc != SASL_OK) {
+ netsec_err(errstr, "Unable to decode SASL network data: %s",
+ sasl_errdetail(nsc->sasl_conn));
+ return NOTOK;
+ }
+
+ if (tmpoutlen == 0)
+ goto retry;
+
+ /*
+ * Just in case ...
+ */
+
+ if (tmpoutlen > remaining) {
+ netsec_err(errstr, "Internal error: SASL decode buffer overflow!");
+ return NOTOK;
+ }
+
+ memcpy(end, tmpout, tmpoutlen);
+
+ nsc->ns_inbuflen += tmpoutlen;
+ } else
+#endif /* CYRUS_SASL */
+ nsc->ns_inbuflen += rc;
+
+ /*
+ * If we're past the halfway point in our read buffers, shuffle everything
+ * back to the beginning.
+ */
+
+ if (startoffset > nsc->ns_inbufsize / 2) {
+ memmove(nsc->ns_inbuffer, nsc->ns_inptr, nsc->ns_inbuflen);
+ nsc->ns_inptr = nsc->ns_inbuffer;
+ }
+
+ return OK;
+}
+
+/*
+ * Write data to our network connection. Really, fill up the buffer as
+ * much as we can, and flush it out if necessary. netsec_flush() does
+ * the real work.
+ */
+
+int
+netsec_write(netsec_context *nsc, const void *buffer, size_t size,
+ char **errstr)
+{
+ const unsigned char *bufptr = buffer;
+ int rc, remaining;
+
+ /*
+ * If TLS is active, then bypass all of our buffering logic; just
+ * write it directly to our BIO. We have a buffering BIO first in
+ * our stack, so buffering will take place there.
+ */
+#ifdef TLS_SUPPORT
+ if (nsc->tls_active) {
+ rc = BIO_write(nsc->ssl_io, buffer, size);
+
+ if (rc <= 0) {
+ netsec_err(errstr, "Error writing to TLS connection: %s",
+ ERR_error_string(ERR_get_error(), NULL));
+ return NOTOK;
+ }
+
+ return OK;
+ }
+#endif /* TLS_SUPPORT */
+
+ /*
+ * Run a loop copying in data to our local buffer; when we're done with
+ * any buffer overflows then just copy any remaining data in.
+ */
+
+ while ((int) size >= (remaining = nsc->ns_outbufsize - nsc->ns_outbuflen)) {
+ memcpy(nsc->ns_outptr, bufptr, remaining);
+
+ /*
+ * In theory I should increment outptr, but netsec_flush just resets
+ * it anyway.
+ */
+ nsc->ns_outbuflen = nsc->ns_outbufsize;
+
+ rc = netsec_flush(nsc, errstr);
+
+ if (rc != OK)
+ return NOTOK;
+
+ bufptr += remaining;
+ size -= remaining;
+ }
+
+ /*
+ * Copy any leftover data into the buffer.
+ */
+
+ if (size > 0) {
+ memcpy(nsc->ns_outptr, bufptr, size);
+ nsc->ns_outptr += size;
+ nsc->ns_outbuflen += size;
+ }
+
+ return OK;
+}
+
+/*
+ * Write bytes to the network using printf()-style formatting.
+ *
+ * Again, for the most part copy stuff into our buffer to be flushed
+ * out later.
+ */
+
+int
+netsec_printf(netsec_context *nsc, char **errstr, const char *format, ...)
+{
+ va_list ap;
+ int rc;
+
+ /*
+ * Again, if we're using TLS, then bypass our local buffering
+ */
+#ifdef TLS_SUPPORT
+ if (nsc->tls_active) {
+ va_start(ap, format);
+ rc = BIO_vprintf(nsc->ssl_io, format, ap);
+ va_end(ap);
+
+ if (rc <= 0) {
+ netsec_err(errstr, "Error writing to TLS connection: %s",
+ ERR_error_string(ERR_get_error(), NULL));
+ return NOTOK;
+ }
+
+ return OK;
+ }
+#endif /* TLS_SUPPORT */
+
+ /*
+ * Cheat a little. If we can fit the data into our outgoing buffer,
+ * great! If not, generate a flush and retry once.
+ */
+
+retry:
+ va_start(ap, format);
+ rc = vsnprintf((char *) nsc->ns_outptr,
+ nsc->ns_outbufsize - nsc->ns_outbuflen, format, ap);
+ va_end(ap);
+
+ if (rc >= (int) (nsc->ns_outbufsize - nsc->ns_outbuflen)) {
+ /*
+ * This means we have an overflow. Note that we don't actually
+ * make use of the terminating NUL, but according to the spec
+ * vsnprintf() won't write to the last byte in the string; that's
+ * why we have to use >= in the comparison above.
+ */
+ if (nsc->ns_outbuffer == nsc->ns_outptr) {
+ /*
+ * Whoops, if the buffer pointer was the same as the start of the
+ * buffer, that means we overflowed the internal buffer.
+ * At that point, just give up.
+ */
+ netsec_err(errstr, "Internal error: wanted to printf() a total of "
+ "%d bytes, but our buffer size was only %d bytes",
+ rc, nsc->ns_outbufsize);
+ return NOTOK;
+ } else {
+ /*
+ * Generate a flush (which may be inefficient, but hopefully
+ * it isn't) and then try again.
+ */
+ if (netsec_flush(nsc, errstr) != OK)
+ return NOTOK;
+ /*
+ * After this, outbuffer should == outptr, so we shouldn't
+ * hit this next time around.
+ */
+ goto retry;
+ }
+ }
+
+ nsc->ns_outptr += rc;
+ nsc->ns_outbuflen += rc;
+
+ return OK;
+}
+
+/*
+ * Flush out any buffered data in our output buffers. This routine is
+ * actually where the real network writes take place.
+ */
+
+int
+netsec_flush(netsec_context *nsc, char **errstr)
+{
+ const char *netoutbuf = (const char *) nsc->ns_outbuffer;
+ unsigned int netoutlen = nsc->ns_outbuflen;
+ int rc;
+
+ /*
+ * For TLS connections, just call BIO_flush(); we'll let TLS handle
+ * all of our output buffering.
+ */
+#ifdef TLS_SUPPORT
+ if (nsc->tls_active) {
+ rc = BIO_flush(nsc->ssl_io);
+
+ if (rc <= 0) {
+ netsec_err(errstr, "Error flushing TLS connection: %s",
+ ERR_error_string(ERR_get_error(), NULL));
+ return NOTOK;
+ }
+
+ return OK;
+ }
+#endif /* TLS_SUPPORT */
+
+ /*
+ * If SASL security layers are in effect, run the data through
+ * sasl_encode() first and then write it.
+ */
+#ifdef CYRUS_SASL
+ if (nsc->sasl_seclayer) {
+ rc = sasl_encode(nsc->sasl_conn, (const char *) nsc->ns_outbuffer,
+ nsc->ns_outbuflen, &netoutbuf, &netoutlen);
+
+ if (rc != SASL_OK) {
+ netsec_err(errstr, "SASL data encoding failed: %s",
+ sasl_errdetail(nsc->sasl_conn));
+ return NOTOK;
+ }
+
+ }
+#endif /* CYRUS_SASL */
+ rc = write(nsc->ns_fd, netoutbuf, netoutlen);
+
+ if (rc < 0) {
+ netsec_err(errstr, "write() failed: %s", strerror(errno));
+ return NOTOK;
+ }
+
+ nsc->ns_outptr = nsc->ns_outbuffer;
+ nsc->ns_outbuflen = 0;
+
+ return OK;
+}
+
projects / nmh / commitdiff