diplodocus.org Git - nmh/blob - config.h.in

   1 /* config.h.in.  Generated automatically from configure.in by autoheader.  */
   2
   3 /****** BEGIN USER CONFIGURATION SECTION *****/
   4
   5 /*
   6  * IMPORTANT: You should no longer need to edit this file to handle
   7  * your operating system. That should be handled and set correctly by
   8  * configure now.
   9  *
  10  * These are slowly being phased out, but currently
  11  * not everyone is auto-configured.  Then decide if you
  12  * wish to change the features that are compiled into nmh.
  13  */
  14
  15 /*
  16  * Define to 1 if you need to make `inc' set-group-id
  17  * because your mail spool is not world writable.  This
  18  * will add some extra security checks, although I can't
  19  * guarantee it is safe.  Also, you will need to change the
  20  * group and add the setgid bit to `inc' manually after
  21  * installation.
  22  */
  23 /* #define MAILGROUP  1 */
  24
  25 /*
  26  * Turn on locale (setlocale) support
  27  */
  28 #define LOCALE  1
  29
  30 /*
  31  * Define to 1 the type of file locking to use.  You need to
  32  * make sure the type of locking you use is compatible with
  33  * other programs which may modify your maildrops.
  34  * Currently you can only use one type.
  35  */
  36 #define DOT_LOCKING   1
  37 /* #define FCNTL_LOCKING 1 */
  38 /* #define LOCKF_LOCKING 1 */
  39 /* #define FLOCK_LOCKING 1 */
  40
  41 /*
  42  * If you have defined DOT_LOCKING, then the default is to
  43  * place the lock files in the same directory as the file that
  44  * is to be locked.  Alternately, if you define LOCKDIR, you
  45  * can specify that all lock files go in a specific directory.
  46  * Don't define this unless you know you need it.
  47  */
  48 /* #define LOCKDIR "/usr/spool/locks" */
  49
  50 /*
  51  * Define this if your passwords are stored in some type of
  52  * distributed name service, such as NIS, or NIS+.
  53  */
  54 #define DBMPWD  1
  55
  56 /*
  57  * Directs nmh not to try and rewrite addresses
  58  * to their official form.  You probably don't
  59  * want to change this without good reason.
  60  */
  61 #define DUMB    1
  62
  63 /*
  64  * Define this if you do not want nmh to attach the local hostname
  65  * to local addresses.  You must also define DUMB.  You probably
  66  * dont' need this unless you are behind a firewall.
  67  */
  68 /* #define REALLYDUMB  1 */
  69
  70 /*
  71  * Directs inc/slocal to extract the envelope sender from "From "
  72  * line.  If inc/slocal is saving message to folder, then this
  73  * sender information is then used to create a Return-Path
  74  * header which is then added to the message.
  75  */
  76 #define RPATHS  1
  77
  78 /*
  79  * If defined, slocal will use `mbox' format when saving to
  80  * your standard mail spool.  If not defined, it will use
  81  * mmdf format.
  82  */
  83 #define SLOCAL_MBOX  1
  84
  85 /*
  86  * If this is defined, nmh will recognize the ~ construct.
  87  */
  88 #define MHRC    1
  89
  90 /*
  91  * Compile simple ftp client into mhn.  This will be used by mhn
  92  * for ftp access unless you have specified another access method
  93  * in your .mh_profile or mhn.defaults.  Use the "mhn-access-ftp"
  94  * profile entry to override this.  Check mhn(1) man page for
  95  * details.
  96  */
  97 #define BUILTIN_FTP 1
  98
  99 /*
 100  * If you enable POP support, this is the the port name
 101  * that nmh will use.  Make sure this is defined in your
 102  * /etc/services file (or its NIS/NIS+ equivalent).  If you
 103  * are using KPOP, you will probably need to change this
 104  * to "kpop".
 105  */
 106 #define POPSERVICE "pop3"
 107
 108 /*
 109  * Define the default creation modes for folders and messages.
 110  */
 111 #define DEFAULT_FOLDER_MODE "0700"
 112 #define DEFAULT_MESSAGE_MODE "0600"
 113
 114 /*
 115  * The prefix which is prepended to the name of messages when they
 116  * are "removed" by rmm.  This should typically be `,' or `#'
 117  */
 118 #define BACKUP_PREFIX ","
 119
 120 /*
 121  * Name of link to file to which you are replying.
 122  */
 123 #define LINK "@"
 124
 125 /*
 126  * If wait/waitpid returns an int (no union wait).
 127  */
 128 #define WAITINT 1
 129
 130 /***** END USER CONFIGURATION SECTION *****/
 131
 132 /* Define to empty if the keyword does not work.  */
 133 #undef const
 134
 135 /* Define to `int' if <sys/types.h> doesn't define.  */
 136 #undef gid_t
 137
 138 /* Define if your struct stat has st_blksize.  */
 139 #undef HAVE_ST_BLKSIZE
 140
 141 /* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
 142 #undef HAVE_SYS_WAIT_H
 143
 144 /* Define if you have <vfork.h>.  */
 145 #undef HAVE_VFORK_H
 146
 147 /* Define to `int' if <sys/types.h> doesn't define.  */
 148 #undef mode_t
 149
 150 /* Define to `long' if <sys/types.h> doesn't define.  */
 151 #undef off_t
 152
 153 /* Define to `int' if <sys/types.h> doesn't define.  */
 154 #undef pid_t
 155
 156 /* Define as the return type of signal handlers (int or void).  */
 157 #undef RETSIGTYPE
 158
 159 /* Define to `unsigned' if <sys/types.h> doesn't define.  */
 160 #undef size_t
 161
 162 /* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
 163 #undef STAT_MACROS_BROKEN
 164
 165 /* Define if you have the ANSI C header files.  */
 166 #undef STDC_HEADERS
 167
 168 /* Define on System V Release 4.  */
 169 #undef SVR4
 170
 171 /* Define if you can safely include both <sys/time.h> and <time.h>.  */
 172 #undef TIME_WITH_SYS_TIME
 173
 174 /* Define to `int' if <sys/types.h> doesn't define.  */
 175 #undef uid_t
 176
 177 /* Define vfork as fork if vfork does not work.  */
 178 #undef vfork
 179
 180 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX, SCO5 */
 181 #undef SYS5
 182
 183 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX */
 184 #undef SVR4
 185
 186 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS -- does
 187  * PicoBSD have uname? :) */
 188 #undef BIND
 189 #undef BSD42
 190
 191 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS */
 192 #undef BSD44
 193
 194 /* Defined for SCO5 */
 195 #undef SCO_5_STDIO
 196
 197 /* Defined for Linux */
 198 #undef LINUX_STDIO
 199
 200 /*
 201  * Define this if you want SMTP (simple mail transport protocol)
 202  * support.  When sending mail, instead of passing the message to
 203  * the mail transport agent (typically sendmail), nmh will open a
 204  * socket connection to the mail port on the machine specified in
 205  * the `mts.conf' file (default is localhost), and speak SMTP directly.
 206  */
 207 #undef SMTPMTS
 208
 209 /*
 210  * Use sendmail as transport agent.  Post messages by piping
 211  * them directly to sendmail.
 212  */
 213 #undef SENDMTS
 214
 215 /*
 216  * Define this to compile client-side support for pop into
 217  * inc and msgchk.  Do not change this value manually.  You
 218  * must run configure with the '--enable-nmh-pop' option
 219  * to correctly build the pop client support.
 220  */
 221 #undef POP
 222
 223 /*
 224  * Define this to compile client-side support for kpop
 225  * (kerberized pop) into inc and msgchk.  Do not change this
 226  * value manually.  You must run configure with the option
 227  * '--with-krb4=PREFIX' to correctly build the kpop client support.
 228  */
 229 #undef KPOP
 230
 231 /*
 232  * Define this to "pop" when using Kerberos V4
 233  */
 234 #undef KPOP_PRINCIPAL
 235
 236 /*
 237  * Define this to compile support for using Hesiod to locate
 238  * pop servers into inc and msgchk.  Do not change this value
 239  * manually.  You must run configure with the option
 240  * '--with-hesiod=PREFIX' to correctly build Hesiod support.
 241  */
 242 #undef HESIOD
 243
 244 /*
 245  * Compile in support for the Emacs front-end mh-e.
 246  */
 247 #undef MHE
 248
 249 /* Define to 1 if your termcap library has the ospeed variable */
 250 #undef HAVE_OSPEED
 251 /* Define to 1 if you have ospeed, but it is not defined in termcap.h */
 252 #undef MUST_DEFINE_OSPEED
 253
 254 /* Define to 1 if you have reliable signals */
 255 #undef RELIABLE_SIGNALS
 256
 257 /* Define to 1 if you use POSIX style signal handling */
 258 #undef POSIX_SIGNALS
 259
 260
 261 /* Define to 1 if you use BSD style signal handling (and can block signals) */
 262 #undef BSD_SIGNALS
 263
 264
 265 /* Define to 1 if you use SYS style signal handling (and can block signals) */
 266 #undef SYSV_SIGNALS
 267
 268
 269 /* Define to 1 if you have no signal blocking at all (bummer) */
 270 #undef NO_SIGNAL_BLOCKING
 271
 272 /* Define to `unsigned int' if <sys/types.h> or <signal.h> doesn't define */
 273 #undef sigset_t
 274
 275 /*
 276  * Define to 1 if your vi has ATT bug, such that it returns
 277  * non-zero exit codes on `pseudo-errors'.
 278  */
 279 #undef ATTVIBUG
 280
 281 /* Define ruserpass as _ruserpass if your libraries have a bug *
 282  * such that it can't find ruserpass, but can find _ruserpass. */
 283 #undef ruserpass
 284
 285 /* Define if your system defines TIOCGWINSZ in sys/ioctl.h.  */
 286 #undef GWINSZ_IN_SYS_IOCTL
 287
 288 /* Define if your system defines `struct winsize' in sys/ptem.h.  */
 289 #undef WINSIZE_IN_PTEM
 290
 291 /* Define to 1 if struct tm has gmtoff */
 292 #undef HAVE_TM_GMTOFF
 293
 294 /* Define if your system has sigsetjmp */
 295 #undef HAVE_SIGSETJMP
 296
 297 /* Define if you have the killpg function.  */
 298 #undef HAVE_KILLPG
 299
 300 /* Define if you have the lstat function.  */
 301 #undef HAVE_LSTAT
 302
 303 /* Define if you have the mkstemp function.  */
 304 #undef HAVE_MKSTEMP
 305
 306 /* Define if you have the sigaction function.  */
 307 #undef HAVE_SIGACTION
 308
 309 /* Define if you have the sigblock function.  */
 310 #undef HAVE_SIGBLOCK
 311
 312 /* Define if you have the sighold function.  */
 313 #undef HAVE_SIGHOLD
 314
 315 /* Define if you have the sigprocmask function.  */
 316 #undef HAVE_SIGPROCMASK
 317
 318 /* Define if you have the sigrelse function.  */
 319 #undef HAVE_SIGRELSE
 320
 321 /* Define if you have the sigsetmask function.  */
 322 #undef HAVE_SIGSETMASK
 323
 324 /* Define if you have the snprintf function.  */
 325 #undef HAVE_SNPRINTF
 326
 327 /* Define if you have the strdup function.  */
 328 #undef HAVE_STRDUP
 329
 330 /* Define if you have the strerror function.  */
 331 #undef HAVE_STRERROR
 332
 333 /* Define if you have the tzset function.  */
 334 #undef HAVE_TZSET
 335
 336 /* Define if you have the uname function.  */
 337 #undef HAVE_UNAME
 338
 339 /* Define if you have the wait3 function.  */
 340 #undef HAVE_WAIT3
 341
 342 /* Define if you have the waitpid function.  */
 343 #undef HAVE_WAITPID
 344
 345 /* Define if you have the writev function.  */
 346 #undef HAVE_WRITEV
 347
 348 /* Define if you have the <arpa/ftp.h> header file.  */
 349 #undef HAVE_ARPA_FTP_H
 350
 351 /* Define if you have the <arpa/inet.h> header file.  */
 352 #undef HAVE_ARPA_INET_H
 353
 354 /* Define if you have the <crypt.h> header file.  */
 355 #undef HAVE_CRYPT_H
 356
 357 /* Define if you have the <dirent.h> header file.  */
 358 #undef HAVE_DIRENT_H
 359
 360 /* Define if you have the <errno.h> header file.  */
 361 #undef HAVE_ERRNO_H
 362
 363 /* Define if you have the <fcntl.h> header file.  */
 364 #undef HAVE_FCNTL_H
 365
 366 /* Define if you have the <limits.h> header file.  */
 367 #undef HAVE_LIMITS_H
 368
 369 /* Define if you have the <locale.h> header file.  */
 370 #undef HAVE_LOCALE_H
 371
 372 /* Define if you have the <memory.h> header file.  */
 373 #undef HAVE_MEMORY_H
 374
 375 /* Define if you have the <ndir.h> header file.  */
 376 #undef HAVE_NDIR_H
 377
 378 /* Define if you have the <stdlib.h> header file.  */
 379 #undef HAVE_STDLIB_H
 380
 381 /* Define if you have the <string.h> header file.  */
 382 #undef HAVE_STRING_H
 383
 384 /* Define if you have the <sys/dir.h> header file.  */
 385 #undef HAVE_SYS_DIR_H
 386
 387 /* Define if you have the <sys/ndir.h> header file.  */
 388 #undef HAVE_SYS_NDIR_H
 389
 390 /* Define if you have the <sys/param.h> header file.  */
 391 #undef HAVE_SYS_PARAM_H
 392
 393 /* Define if you have the <sys/time.h> header file.  */
 394 #undef HAVE_SYS_TIME_H
 395
 396 /* Define if you have the <sys/utsname.h> header file.  */
 397 #undef HAVE_SYS_UTSNAME_H
 398
 399 /* Define if you have the <termcap.h> header file.  */
 400 #undef HAVE_TERMCAP_H
 401
 402 /* Define if you have the <termio.h> header file.  */
 403 #undef HAVE_TERMIO_H
 404
 405 /* Define if you have the <termios.h> header file.  */
 406 #undef HAVE_TERMIOS_H
 407
 408 /* Define if you have the <unistd.h> header file.  */
 409 #undef HAVE_UNISTD_H
 410
 411 /* Define if you have the m library (-lm).  */
 412 #undef HAVE_LIBM
 413
 414 /* Define if you have the mkstemp library (-lmkstemp).  */
 415 #undef HAVE_LIBMKSTEMP
 416
 417 /* Define if you have the ndbm library (-lndbm).  */
 418 #undef HAVE_LIBNDBM
 419
 420 /* Define if you have the nsl library (-lnsl).  */
 421 #undef HAVE_LIBNSL
 422
 423 /* Define if you have the resolv library (-lresolv).  */
 424 #undef HAVE_LIBRESOLV
 425
 426 /* Define if you have the socket library (-lsocket).  */
 427 #undef HAVE_LIBSOCKET