diplodocus.org Git - nmh/blob - config.h.in

   1 /* config.h.in.  Generated automatically from configure.in by autoheader.  */
   2
   3 /****** BEGIN USER CONFIGURATION SECTION *****/
   4
   5 /*
   6  * IMPORTANT: You should no longer need to edit this file to handle
   7  * your operating system. That should be handled and set correctly by
   8  * configure now.
   9  *
  10  * These are slowly being phased out, but currently
  11  * not everyone is auto-configured.  Then decide if you
  12  * wish to change the features that are compiled into nmh.
  13  */
  14
  15 /*
  16  * Turn on locale (setlocale) support
  17  */
  18 #define LOCALE  1
  19
  20 /*
  21  * Define to 1 the type of file locking to use.  You need to
  22  * make sure the type of locking you use is compatible with
  23  * other programs which may modify your maildrops.
  24  * Currently you can only use one type.
  25  */
  26 #define DOT_LOCKING   1
  27 /* #define FCNTL_LOCKING 1 */
  28 /* #define LOCKF_LOCKING 1 */
  29 /* #define FLOCK_LOCKING 1 */
  30
  31 /*
  32  * If you have defined DOT_LOCKING, then the default is to
  33  * place the lock files in the same directory as the file that
  34  * is to be locked.  Alternately, if you define LOCKDIR, you
  35  * can specify that all lock files go in a specific directory.
  36  * Don't define this unless you know you need it.
  37  */
  38 /* #define LOCKDIR "/usr/spool/locks" */
  39
  40 /*
  41  * Define this if your passwords are stored in some type of
  42  * distributed name service, such as NIS, or NIS+.
  43  */
  44 #define DBMPWD  1
  45
  46 /*
  47  * Directs nmh not to try and rewrite addresses
  48  * to their official form.  You probably don't
  49  * want to change this without good reason.
  50  */
  51 #define DUMB    1
  52
  53 /*
  54  * Define this if you do not want nmh to attach the local hostname
  55  * to local addresses.  You must also define DUMB.  You probably
  56  * don't need this unless you are behind a firewall.
  57  */
  58 /* #define REALLYDUMB  1 */
  59
  60 /*
  61  * Starting on January 1, 2000, some MUAs like ELM and Ultrix's DXmail started
  62  * generated bad dates ("00" or "100" for the year).  If this #define is active,
  63  * we use windowing to correct those dates to what we presume to be the intended
  64  * values.  About the only time this could get us into trouble would be if a MUA
  65  * was generating a year of "00" in 2001 or later, due to an unrelated bug.  In
  66  * this case we would "correct" the year to 2000, which could result in
  67  * inaccurate bug reports against the offending MUA.  A much more esoteric case
  68  * in which you might not want to #define this would be if you were OCR'ing in
  69  * old written correspondence and saving it in email format, and you had dates
  70  * of 1899 or earlier.
  71  */
  72 #define FIX_NON_Y2K_COMPLIANT_MUA_DATES 1
  73
  74 /*
  75  * Directs inc/slocal to extract the envelope sender from "From "
  76  * line.  If inc/slocal is saving message to folder, then this
  77  * sender information is then used to create a Return-Path
  78  * header which is then added to the message.
  79  */
  80 #define RPATHS  1
  81
  82 /*
  83  * If defined, slocal will use `mbox' format when saving to
  84  * your standard mail spool.  If not defined, it will use
  85  * mmdf format.
  86  */
  87 #define SLOCAL_MBOX  1
  88
  89 /*
  90  * If this is defined, nmh will recognize the ~ construct.
  91  */
  92 #define MHRC    1
  93
  94 /*
  95  * Compile simple ftp client into mhn.  This will be used by mhn
  96  * for ftp access unless you have specified another access method
  97  * in your .mh_profile or mhn.defaults.  Use the "mhn-access-ftp"
  98  * profile entry to override this.  Check mhn(1) man page for
  99  * details.
 100  */
 101 #define BUILTIN_FTP 1
 102
 103 /*
 104  * If you enable POP support, this is the the port name that nmh will use.  Make
 105  * sure this is defined in your /etc/services file (or its NIS/NIS+ equivalent).
 106  * If you are using KPOP, you will need to change this to "kpop" unless you want
 107  * to be able to use both POP3 _and_ Kerberized POP and plan to use inc and
 108  * msgchk's -kpop switch every time in the latter case.
 109  */
 110 #define POPSERVICE "pop3"
 111
 112 /*
 113  * Define the default creation modes for folders and messages.
 114  */
 115 #define DEFAULT_FOLDER_MODE "700"
 116 #define DEFAULT_MESSAGE_MODE "600"
 117
 118 /*
 119  * The prefix which is prepended to the name of messages when they
 120  * are "removed" by rmm.  This should typically be `,' or `#'
 121  */
 122 #define BACKUP_PREFIX ","
 123
 124 /*
 125  * Name of link to file to which you are replying.
 126  */
 127 #define LINK "@"
 128
 129 /*
 130  * If wait/waitpid returns an int (no union wait).
 131  */
 132 #define WAITINT 1
 133
 134 /* The following are autoconfigured, but you may wish to override the
 135  * decisions of autoconf (and AC_CANONICAL_SYSTEM) and do your own
 136  * thing. If so, you can modify the definitions. The Comments are as
 137  * useful as ever. */
 138
 139 /* these three are only used in vmh.c, which currently is not being
 140  * built anyway. -Doug */
 141 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX, SCO5 */
 142 #undef SYS5
 143 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX */
 144 #undef SVR4
 145 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS, Mac OS X/Rhapsody */
 146 #undef BSD44
 147
 148 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS, Mac OS X/Rhapsody
 149  * -- does PicoBSD have uname? :) */
 150 #undef BSD42
 151
 152 /* Defined for SCO5 */
 153 #undef SCO_5_STDIO
 154
 155 /* This tells nmh to use the Linux _IO_*_ptr defines from libio.h */
 156 #undef LINUX_STDIO
 157
 158
 159 /***** END USER CONFIGURATION SECTION *****/
 160
 161 /* Define to empty if the keyword does not work.  */
 162 #undef const
 163
 164 /* Define to `int' if <sys/types.h> doesn't define.  */
 165 #undef gid_t
 166
 167 /* Define if your struct stat has st_blksize.  */
 168 #undef HAVE_ST_BLKSIZE
 169
 170 /* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
 171 #undef HAVE_SYS_WAIT_H
 172
 173 /* Define if you have <vfork.h>.  */
 174 #undef HAVE_VFORK_H
 175
 176 /* Define to `int' if <sys/types.h> doesn't define.  */
 177 #undef mode_t
 178
 179 /* Define to `long' if <sys/types.h> doesn't define.  */
 180 #undef off_t
 181
 182 /* Define to `int' if <sys/types.h> doesn't define.  */
 183 #undef pid_t
 184
 185 /* Define as the return type of signal handlers (int or void).  */
 186 #undef RETSIGTYPE
 187
 188 /* Define to `unsigned' if <sys/types.h> doesn't define.  */
 189 #undef size_t
 190
 191 /* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
 192 #undef STAT_MACROS_BROKEN
 193
 194 /* Define if you have the ANSI C header files.  */
 195 #undef STDC_HEADERS
 196
 197 /* Define on System V Release 4.  */
 198 #undef SVR4
 199
 200 /* Define if you can safely include both <sys/time.h> and <time.h>.  */
 201 #undef TIME_WITH_SYS_TIME
 202
 203 /* Define to `int' if <sys/types.h> doesn't define.  */
 204 #undef uid_t
 205
 206 /* Define vfork as fork if vfork does not work.  */
 207 #undef vfork
 208
 209 /*
 210  * Define this if you want SMTP (simple mail transport protocol)
 211  * support.  When sending mail, instead of passing the message to
 212  * the mail transport agent (typically sendmail), nmh will open a
 213  * socket connection to the mail port on the machine specified in
 214  * the `mts.conf' file (default is localhost), and speak SMTP directly.
 215  */
 216 #undef SMTPMTS
 217
 218 /*
 219  * Use sendmail as transport agent.  Post messages by piping
 220  * them directly to sendmail.
 221  */
 222 #undef SENDMTS
 223
 224 /*
 225  * Define this to compile client-side support for pop into
 226  * inc and msgchk.  Do not change this value manually.  You
 227  * must run configure with the '--enable-pop' option to
 228  * correctly build the pop client support.
 229  */
 230 #undef POP
 231
 232 /*
 233  * Define this to compile client-side support for apop into
 234  * inc and msgchk. Do not change this value manually. You
 235  * must run configure with the '--enable-apop' option to
 236  * correctly build the apop client support.
 237  */
 238 #undef APOP
 239
 240 /*
 241  * Define this to compile client-side support for kpop
 242  * (kerberized pop) into inc and msgchk.  Do not change this
 243  * value manually.  You must run configure with the option
 244  * '--with-krb4=PREFIX' to correctly build the kpop client support.
 245  */
 246 #undef KPOP
 247
 248 /*
 249  * Define this to "pop" when using Kerberos V4
 250  */
 251 #undef KPOP_PRINCIPAL
 252
 253 /*
 254  * Define this to compile support for using Hesiod to locate
 255  * pop servers into inc and msgchk.  Do not change this value
 256  * manually.  You must run configure with the option
 257  * '--with-hesiod=PREFIX' to correctly build Hesiod support.
 258  */
 259 #undef HESIOD
 260
 261 /*
 262  * Compile in support for the Emacs front-end mh-e.
 263  */
 264 #undef MHE
 265
 266 /* Define to 1 if your termcap library has the ospeed variable */
 267 #undef HAVE_OSPEED
 268 /* Define to 1 if you have ospeed, but it is not defined in termcap.h */
 269 #undef MUST_DEFINE_OSPEED
 270
 271 /* Define to 1 if you have reliable signals */
 272 #undef RELIABLE_SIGNALS
 273
 274 /* Define to 1 if you use POSIX style signal handling */
 275 #undef POSIX_SIGNALS
 276
 277
 278 /* Define to 1 if you use BSD style signal handling (and can block signals) */
 279 #undef BSD_SIGNALS
 280
 281
 282 /* Define to 1 if you use SYS style signal handling (and can block signals) */
 283 #undef SYSV_SIGNALS
 284
 285
 286 /* Define to 1 if you have no signal blocking at all (bummer) */
 287 #undef NO_SIGNAL_BLOCKING
 288
 289 /* Define to `unsigned int' if <sys/types.h> or <signal.h> doesn't define */
 290 #undef sigset_t
 291
 292 /*
 293  * Define to 1 if your vi has ATT bug, such that it returns
 294  * non-zero exit codes on `pseudo-errors'.
 295  */
 296 #undef ATTVIBUG
 297
 298 /*
 299  * Define to 1 if you need to make `inc' set-group-id because your mail spool is
 300  * not world writable.  There are no guarantees as to the safety of doing this,
 301  * but this #define will add some extra security checks.
 302  */
 303 #undef MAILGROUP
 304
 305 /* Define if your system defines TIOCGWINSZ in sys/ioctl.h.  */
 306 #undef GWINSZ_IN_SYS_IOCTL
 307
 308 /* Define if your system defines `struct winsize' in sys/ptem.h.  */
 309 #undef WINSIZE_IN_PTEM
 310
 311 /* Define to 1 if struct tm has gmtoff */
 312 #undef HAVE_TM_GMTOFF
 313
 314 /* Define if your system has sigsetjmp */
 315 #undef HAVE_SIGSETJMP
 316
 317 /* Define if your system has gethostbyname */
 318 #undef HAVE_GETHOSTBYNAME
 319
 320 /* Define to the header containing the declaration of initgroups() on your
 321    system, if any.  AIX 4.[13], SunOS 4.1.3, and ULTRIX 4.2A have the function
 322    in libc but don't have a declaration anywhere. */
 323 #undef INITGROUPS_HEADER
 324
 325 /* Define if your system actually has a prototype for snprintf() in <stdio.h>
 326    (or a file it includes) rather than just having a "stealth" definition of it
 327    in libc.a the way AIX 4.1 does. */
 328 #undef HAVE_SNPRINTF_PROTOTYPE
 329
 330 /* Define if you have the killpg function.  */
 331 #undef HAVE_KILLPG
 332
 333 /* Define if you have the lstat function.  */
 334 #undef HAVE_LSTAT
 335
 336 /* Define if you have the mkstemp function.  */
 337 #undef HAVE_MKSTEMP
 338
 339 /* Define if you have the sethostent function.  */
 340 #undef HAVE_SETHOSTENT
 341
 342 /* Define if you have the sigaction function.  */
 343 #undef HAVE_SIGACTION
 344
 345 /* Define if you have the sigblock function.  */
 346 #undef HAVE_SIGBLOCK
 347
 348 /* Define if you have the sighold function.  */
 349 #undef HAVE_SIGHOLD
 350
 351 /* Define if you have the sigprocmask function.  */
 352 #undef HAVE_SIGPROCMASK
 353
 354 /* Define if you have the sigrelse function.  */
 355 #undef HAVE_SIGRELSE
 356
 357 /* Define if you have the sigsetmask function.  */
 358 #undef HAVE_SIGSETMASK
 359
 360 /* Define if you have the snprintf function.  */
 361 #undef HAVE_SNPRINTF
 362
 363 /* Define if you have the strdup function.  */
 364 #undef HAVE_STRDUP
 365
 366 /* Define if you have the strerror function.  */
 367 #undef HAVE_STRERROR
 368
 369 /* Define if you have the tzset function.  */
 370 #undef HAVE_TZSET
 371
 372 /* Define if you have the uname function.  */
 373 #undef HAVE_UNAME
 374
 375 /* Define if you have the wait3 function.  */
 376 #undef HAVE_WAIT3
 377
 378 /* Define if you have the waitpid function.  */
 379 #undef HAVE_WAITPID
 380
 381 /* Define if you have the writev function.  */
 382 #undef HAVE_WRITEV
 383
 384 /* Define if you have the <arpa/ftp.h> header file.  */
 385 #undef HAVE_ARPA_FTP_H
 386
 387 /* Define if you have the <arpa/inet.h> header file.  */
 388 #undef HAVE_ARPA_INET_H
 389
 390 /* Define if you have the <crypt.h> header file.  */
 391 #undef HAVE_CRYPT_H
 392
 393 /* Define if you have the <db1/ndbm.h> header file.  */
 394 #undef HAVE_DB1_NDBM_H
 395
 396 /* Define if you have the <dirent.h> header file.  */
 397 #undef HAVE_DIRENT_H
 398
 399 /* Define if you have the <errno.h> header file.  */
 400 #undef HAVE_ERRNO_H
 401
 402 /* Define if you have the <fcntl.h> header file.  */
 403 #undef HAVE_FCNTL_H
 404
 405 /* Define if you have the <limits.h> header file.  */
 406 #undef HAVE_LIMITS_H
 407
 408 /* Define if you have the <locale.h> header file.  */
 409 #undef HAVE_LOCALE_H
 410
 411 /* Define if you have the <memory.h> header file.  */
 412 #undef HAVE_MEMORY_H
 413
 414 /* Define if you have the <ndir.h> header file.  */
 415 #undef HAVE_NDIR_H
 416
 417 /* Define if you have the <netdb.h> header file.  */
 418 #undef HAVE_NETDB_H
 419
 420 /* Define if you have the <stdlib.h> header file.  */
 421 #undef HAVE_STDLIB_H
 422
 423 /* Define if you have the <string.h> header file.  */
 424 #undef HAVE_STRING_H
 425
 426 /* Define if you have the <sys/dir.h> header file.  */
 427 #undef HAVE_SYS_DIR_H
 428
 429 /* Define if you have the <sys/ndir.h> header file.  */
 430 #undef HAVE_SYS_NDIR_H
 431
 432 /* Define if you have the <sys/param.h> header file.  */
 433 #undef HAVE_SYS_PARAM_H
 434
 435 /* Define if you have the <sys/time.h> header file.  */
 436 #undef HAVE_SYS_TIME_H
 437
 438 /* Define if you have the <sys/utsname.h> header file.  */
 439 #undef HAVE_SYS_UTSNAME_H
 440
 441 /* Define if you have the <termcap.h> header file.  */
 442 #undef HAVE_TERMCAP_H
 443
 444 /* Define if you have the <termio.h> header file.  */
 445 #undef HAVE_TERMIO_H
 446
 447 /* Define if you have the <termios.h> header file.  */
 448 #undef HAVE_TERMIOS_H
 449
 450 /* Define if you have the <unistd.h> header file.  */
 451 #undef HAVE_UNISTD_H
 452
 453 /* Define if you have the m library (-lm).  */
 454 #undef HAVE_LIBM
 455
 456 /* Define if you have the mkstemp library (-lmkstemp).  */
 457 #undef HAVE_LIBMKSTEMP
 458
 459 /* Define if you have the ndbm library (-lndbm).  */
 460 #undef HAVE_LIBNDBM
 461
 462 /* Define if you have the nsl library (-lnsl).  */
 463 #undef HAVE_LIBNSL
 464
 465 /* Define if you have the resolv library (-lresolv).  */
 466 #undef HAVE_LIBRESOLV
 467
 468 /* Define if you have the socket library (-lsocket).  */
 469 #undef HAVE_LIBSOCKET