diplodocus.org Git - nmh/blob - test/mhfixmsg/test-mhfixmsg

   1 #!/bin/sh
   2 ######################################################
   3 #
   4 # Test mhfixmsg
   5 #
   6 ######################################################
   7
   8 set -e
   9
  10 if test -z "${MH_OBJ_DIR}"; then
  11     srcdir=`dirname $0`/../..
  12     MH_OBJ_DIR=`cd $srcdir && pwd`; export MH_OBJ_DIR
  13 fi
  14
  15 . "${srcdir}/test/post/test-post-common.sh"
  16
  17 expected="$MH_TEST_DIR/test-mhfixmsg$$.expected"
  18 expected_err="$MH_TEST_DIR/test-mhfixmsg$$.expected_err"
  19 actual="$MH_TEST_DIR/test-mhfixmsg$$.actual"
  20 actual_err="$MH_TEST_DIR/test-mhfixmsg$$.actual_err"
  21
  22 #### Make sure that html-to-text conversion is what we expect.
  23 LC_ALL=en_US.UTF-8; export LC_ALL
  24
  25 set +e
  26 if grep mhfixmsg-format-text/html "${MH_TEST_DIR}/Mail/mhn.defaults" \
  27   >/dev/null; then
  28   can_reformat_texthtml=1
  29   if grep 'mhfixmsg-format-text/html.*w3m' "${MH_TEST_DIR}/Mail/mhn.defaults" \
  30     >/dev/null; then
  31     #### w3m uses $HOME/.w3m/, and creates it if it doesn't exist.  To
  32     #### support testing with non-writeable $HOME, and to not leave
  33     #### relics from this test if it is writeable but doesn't already
  34     #### have a .w3m, and to not depend on whatever is in that if it
  35     #### does already exist, overwrite $HOME if using w3m.
  36     HOME="$MHTMPDIR"; export HOME
  37   fi
  38 else
  39   echo "$0: skipping -reformat check because no text browser was found"
  40   can_reformat_texthtml=0
  41 fi
  42 set -e
  43
  44
  45 # check -help
  46 # Verified behavior consistent with compiled sendmail.
  47 cat >"$expected" <<EOF
  48 Usage: mhfixmsg [+folder] [msgs] [switches]
  49   switches are:
  50   -decodetext 8bit|7bit
  51   -nodecodetext
  52   -[no]textcodeset
  53   -[no]reformat
  54   -[no]replacetextplain
  55   -[no]fixboundary
  56   -[no]fixcte
  57   -file file
  58   -outfile file
  59   -rmmproc program
  60   -normmproc
  61   -[no]verbose
  62   -version
  63   -help
  64 EOF
  65
  66 run_prog mhfixmsg -help >"$actual" 2>&1
  67 check "$expected" "$actual"
  68
  69
  70 # check -version
  71 # Verified same behavior as compiled mhfixmsg.
  72 case `mhfixmsg -version` in
  73   mhfixmsg\ --*) ;;
  74   *) printf '%s: mhfixmsg -version generated unexpected output\n' "$0" >&2
  75      failed=`expr ${failed:-0} + 1`;;
  76 esac
  77
  78
  79 # check that non-MIME messages aren't modified
  80 # check -outfile
  81 run_test 'mhfixmsg first -outfile '"$actual" ''
  82 check "`mhpath first`" "$actual" 'keep first'
  83
  84
  85 # check that non-MIME messages with no bodies aren't modified
  86 # check -outfile
  87 cat >`mhpath new` <<EOF
  88 From: Test <test@example.com>
  89 To: Some User <user@example.com>
  90 Date: Fri, 29 Sep 2006 00:00:00
  91 Message-Id: @test.nmh
  92 Subject: message with no body
  93 EOF
  94
  95 run_test 'mhfixmsg last -outfile '"$actual" ''
  96 check "`mhpath last`" "$actual"
  97
  98
  99 # check -nofixcte
 100 cat >"$MH_TEST_DIR"/Mail/inbox/11 <<EOF
 101 From: Anon
 102 To: Mailinglist
 103 Subject: =?ISO-8859-15?Q?Re=3A_H=E5lla_linuxsystem_uppdaterade?=
 104 User-Agent: Alpine 2.00 (DEB 1167 2008-08-23)
 105 MIME-Version: 1.0
 106 Content-Type: MULTIPART/MIXED;
 107     BOUNDARY="----=_NextPart_000_0000_00000000.00000000"
 108 Content-Transfer-Encoding: QUOTED-PRINTABLE
 109
 110   This message is in MIME format.  The first part should be readable
 111 text,
 112   while the remaining parts are likely unreadable without MIME-aware
 113 tools.
 114
 115 ------=_NextPart_000_0000_00000000.00000000
 116 Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-15
 117 Content-Transfer-Encoding: 8BIT
 118
 119 Some text in swedish.
 120
 121 Varf=C3=B6r inte anv=C3=A4nda...
 122
 123 ------=_NextPart_000_0000_00000000.00000000--
 124
 125 And some text after the last part.
 126 EOF
 127
 128 cp -p "$MH_TEST_DIR"/Mail/inbox/11 "$MH_TEST_DIR"/Mail/inbox/12
 129
 130 run_test 'mhfixmsg last -nofixcte' ''
 131 check "$MH_TEST_DIR"/Mail/inbox/11 "$MH_TEST_DIR"/Mail/inbox/12 'keep first'
 132
 133
 134 # check -fixcte (enabled by default):  fixup of erroneous C-T-E in multipart
 135 # check -verbose
 136 cat >"$expected" <<EOF
 137 From: Anon
 138 To: Mailinglist
 139 Subject: =?ISO-8859-15?Q?Re=3A_H=E5lla_linuxsystem_uppdaterade?=
 140 User-Agent: Alpine 2.00 (DEB 1167 2008-08-23)
 141 MIME-Version: 1.0
 142 Content-Type: MULTIPART/MIXED;
 143     BOUNDARY="----=_NextPart_000_0000_00000000.00000000"
 144 Nmh-REPLACED-INVALID-Content-Transfer-Encoding: QUOTED-PRINTABLE
 145 Content-Transfer-Encoding: 8bit
 146
 147   This message is in MIME format.  The first part should be readable
 148 text,
 149   while the remaining parts are likely unreadable without MIME-aware
 150 tools.
 151
 152 ------=_NextPart_000_0000_00000000.00000000
 153 Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-15
 154 Content-Transfer-Encoding: 8BIT
 155
 156 Some text in swedish.
 157
 158 Varf=C3=B6r inte anv=C3=A4nda...
 159
 160 ------=_NextPart_000_0000_00000000.00000000--
 161
 162 And some text after the last part.
 163 EOF
 164
 165 run_test 'mhfixmsg last -outfile '"$actual"' -verbose' \
 166          "mhfixmsg: 11, replace Content-Transfer-Encoding of \
 167 QUOTED-PRINTABLE with 8 bit"
 168 check "$expected" "$actual" 'keep first'
 169
 170
 171 # check with no options:  checks backup
 172 cp "$MH_TEST_DIR"/Mail/inbox/11 "$MH_TEST_DIR"/Mail/inbox/11.original
 173 folder last >/dev/null
 174 run_test 'mhfixmsg' ''
 175 check "$expected" "$MH_TEST_DIR"/Mail/inbox/11 'keep first'
 176 cp "$MH_TEST_DIR"/Mail/inbox/11.original "$MH_TEST_DIR"/Mail/inbox/11
 177 check "$MH_TEST_DIR"/Mail/inbox/,11 "$MH_TEST_DIR"/Mail/inbox/11.original
 178
 179
 180 # check backup with -file
 181 cp "$MH_TEST_DIR"/Mail/inbox/11 "$MH_TEST_DIR"/Mail/inbox/11.original
 182 folder last >/dev/null
 183 run_test 'mhfixmsg -file '"$MH_TEST_DIR"/Mail/inbox/11 ''
 184 check "$MH_TEST_DIR"/Mail/inbox/11 "$expected" 'keep first'
 185 check "$MH_TEST_DIR"/Mail/inbox/,11 "$MH_TEST_DIR"/Mail/inbox/11.original
 186
 187
 188 # check -reformat (enabled by default):  addition of text/plain part
 189 # to solitary text/html part
 190 #
 191 prepare_space >"$expected" <<EOF
 192 MIME-Version: 1.0
 193 From: sender@example.com
 194 To: bonquiqui@example.com
 195 Subject: rue
 196 Date: Sat, 26 Jan 2013 17:37:53 -0500
 197 Content-Type: multipart/alternative; boundary="----=_nmh-multipart"
 198
 199 ------=_nmh-multipart
 200 Content-Type: text/plain; charset="Windows-1252"
 201 Content-Transfer-Encoding: 8bit
 202
 203 Need to go! Need ... to ... go!
 204
 205 ------=_nmh-multipart
 206 Content-Type: text/html; charset="Windows-1252"
 207 Content-Transfer-Encoding: 8bit
 208
 209 <html>
 210 <head>
 211 <meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
 212 <meta name="Generator" content="Microsoft Exchange Server">
 213 <!-- converted from text --><style><!-- .EmailQuote { margin-left: 1pt; padding-left: 4pt; border-left: #800000 2px solid; } --></style>
 214 </head>
 215 <body>
 216 <div>
 217 <div>Need to go! Need ... to ... go!</div>
 218 </body>
 219 </html>
 220
 221 ------=_nmh-multipart--
 222 EOF
 223
 224 cat >"$MH_TEST_DIR"/Mail/inbox/12 <<EOF
 225 MIME-Version: 1.0
 226 From: sender@example.com
 227 To: bonquiqui@example.com
 228 Subject: rue
 229 Date: Sat, 26 Jan 2013 17:37:53 -0500
 230 Content-Type: text/html; charset="Windows-1252"
 231 Content-Transfer-Encoding: quoted-printable
 232
 233 <html>
 234 <head>
 235 <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
 236 252">
 237 <meta name=3D"Generator" content=3D"Microsoft Exchange Server">
 238 <!-- converted from text --><style><!-- .EmailQuote { margin-left: 1pt; pad=
 239 ding-left: 4pt; border-left: #800000 2px solid; } --></style>
 240 </head>
 241 <body>
 242 <div>
 243 <div>Need to go! Need ... to ... go!</div>
 244 </body>
 245 </html>
 246 EOF
 247
 248 if [ $can_reformat_texthtml -eq 1 ]; then
 249   printf '%s\n' "mhfixmsg: 12, insert text/plain part
 250 mhfixmsg: 12 part 1, decode text/html; charset=\"Windows-1252\"" \
 251        >"$expected.err"
 252
 253   #### lynx inserts multiple blank lines, so squeeze them.
 254   run_prog mhfixmsg last -outfile - -verbose 2>"$actual.err" | \
 255     squeeze_lines >"$actual"
 256   check "$expected" "$actual" 'ignore space'
 257   check "$expected.err" "$actual.err"
 258 else
 259   rm -f "$expected"
 260 fi
 261
 262
 263 # check implicit -file with absolute pathname
 264 run_test "mhfixmsg `mhpath last` -outfile /dev/null" ''
 265
 266
 267 # check handling of boundary string that appears in message body
 268 #
 269 prepare_space >"$expected" <<EOF
 270 MIME-Version: 1.0
 271 From: sender@example.com
 272 To: bonquiqui@example.com
 273 Subject: rue
 274 Date: Sat, 26 Jan 2013 17:37:53 -0500
 275 Content-Type: multipart/alternative; boundary="----=_nmh-multipart-3"
 276
 277 ------=_nmh-multipart-3
 278 Content-Type: text/plain; charset="Windows-1252"
 279 Content-Transfer-Encoding: 8bit
 280
 281 ------=_nmh-multipart
 282 ------=_nmh-multipart-1
 283 ------=_nmh-multipart-2
 284
 285 ------=_nmh-multipart-3
 286 Content-Type: text/html; charset="Windows-1252"
 287 Content-Transfer-Encoding: 8bit
 288
 289 <html>
 290 <head>
 291 <meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
 292 <meta name="Generator" content="Microsoft Exchange Server">
 293 <!-- converted from text --><style><!-- .EmailQuote { margin-left: 1pt; padding-left: 4pt; border-left: #800000 2px solid; } --></style>
 294 </head>
 295 <body>
 296 ------=_nmh-multipart<br>
 297 ------=_nmh-multipart-1<br>
 298 ------=_nmh-multipart-2<br>
 299 </body>
 300 </html>
 301
 302 ------=_nmh-multipart-3--
 303 EOF
 304
 305 cat >"$MH_TEST_DIR"/Mail/inbox/12 <<EOF
 306 MIME-Version: 1.0
 307 From: sender@example.com
 308 To: bonquiqui@example.com
 309 Subject: rue
 310 Date: Sat, 26 Jan 2013 17:37:53 -0500
 311 Content-Type: text/html; charset="Windows-1252"
 312 Content-Transfer-Encoding: quoted-printable
 313
 314 <html>
 315 <head>
 316 <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
 317 252">
 318 <meta name=3D"Generator" content=3D"Microsoft Exchange Server">
 319 <!-- converted from text --><style><!-- .EmailQuote { margin-left: 1pt; pad=
 320 ding-left: 4pt; border-left: #800000 2px solid; } --></style>
 321 </head>
 322 <body>
 323 ------=3D_nmh-multipart<br>
 324 ------=3D_nmh-multipart-1<br>
 325 ------=3D_nmh-multipart-2<br>
 326 </body>
 327 </html>
 328 EOF
 329
 330 if [ $can_reformat_texthtml -eq 1 ]; then
 331   printf '%s\n' "mhfixmsg: 12, insert text/plain part
 332 mhfixmsg: 12 part 1, decode text/html; charset=\"Windows-1252\"" \
 333        >"$expected.err"
 334
 335   #### lynx inserts multiple blank lines, so squeeze them.
 336   run_prog mhfixmsg last -outfile - -verbose 2>"$actual.err" | \
 337     squeeze_lines >"$actual"
 338   check "$expected" "$actual" 'ignore space'
 339   check "$expected.err" "$actual.err"
 340 else
 341   rm -f "$expected"
 342 fi
 343
 344
 345 # check -nodecode
 346 prepare_space >"$expected" <<EOF
 347 MIME-Version: 1.0
 348 From: sender@example.com
 349 To: bonquiqui@example.com
 350 Subject: rue
 351 Date: Sat, 26 Jan 2013 17:37:53 -0500
 352 Content-Type: multipart/alternative; boundary="----=_nmh-multipart"
 353
 354 ------=_nmh-multipart
 355 Content-Type: text/plain; charset="Windows-1252"
 356 Content-Transfer-Encoding: 8bit
 357
 358 Need to go! Need ... to ... go!
 359
 360 ------=_nmh-multipart
 361 Content-Type: text/html; charset="Windows-1252"
 362 Content-Transfer-Encoding: quoted-printable
 363
 364 <html>
 365 <head>
 366 <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-=
 367 1252">
 368 <meta name=3D"Generator" content=3D"Microsoft Exchange Server">
 369 <!-- converted from text --><style><!-- .EmailQuote { margin-left: 1pt; pa=
 370 dding-left: 4pt; border-left: #800000 2px solid; } --></style>
 371 </head>
 372 <body>
 373 <div>
 374 <div>Need to go! Need ... to ... go!</div>
 375 </body>
 376 </html>
 377
 378 ------=_nmh-multipart--
 379 EOF
 380
 381 cat >"$MH_TEST_DIR"/Mail/inbox/12 <<EOF
 382 MIME-Version: 1.0
 383 From: sender@example.com
 384 To: bonquiqui@example.com
 385 Subject: rue
 386 Date: Sat, 26 Jan 2013 17:37:53 -0500
 387 Content-Type: text/html; charset="Windows-1252"
 388 Content-Transfer-Encoding: quoted-printable
 389
 390 <html>
 391 <head>
 392 <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
 393 252">
 394 <meta name=3D"Generator" content=3D"Microsoft Exchange Server">
 395 <!-- converted from text --><style><!-- .EmailQuote { margin-left: 1pt; pad=
 396 ding-left: 4pt; border-left: #800000 2px solid; } --></style>
 397 </head>
 398 <body>
 399 <div>
 400 <div>Need to go! Need ... to ... go!</div>
 401 </body>
 402 </html>
 403 EOF
 404
 405 if [ $can_reformat_texthtml -eq 1 ]; then
 406   printf '%s\n' 'mhfixmsg: 12, insert text/plain part' >"$expected.err"
 407
 408   #### lynx inserts multiple blank lines, so squeeze them.
 409   run_prog mhfixmsg last -nodecode -outfile - -verbose 2>"$actual.err" | \
 410     squeeze_lines >"$actual"
 411   check "$expected" "$actual" 'ignore space'
 412   check "$expected.err" "$actual.err"
 413 else
 414   rm -f "$expected"
 415 fi
 416
 417
 418 # check -decode (enabled by default)
 419 cat >"$expected" <<EOF
 420 To: recipient@example.com
 421 From: sender@example.com
 422 Subject: mhfixmsg decode test
 423 MIME-Version: 1.0
 424 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
 425
 426 ------- =_aaaaaaaaaa0
 427 Content-Type: text/plain; charset="iso-8859-1"; name="test4.txt"
 428 Content-Disposition: attachment; filename="test4.txt"
 429 Content-Transfer-Encoding: 8bit
 430
 431 This is a text/plain part.
 432
 433 ------- =_aaaaaaaaaa0--
 434 EOF
 435
 436 cat >`mhpath new` <<EOF
 437 To: recipient@example.com
 438 From: sender@example.com
 439 Subject: mhfixmsg decode test
 440 MIME-Version: 1.0
 441 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
 442
 443 ------- =_aaaaaaaaaa0
 444 Content-Type: text/plain; charset="iso-8859-1"; name="test4.txt"
 445 Content-Disposition: attachment; filename="test4.txt"
 446 Content-Transfer-Encoding: base64
 447
 448 VGhpcyBpcyBhIHRleHQvcGxhaW4gcGFydC4K
 449
 450 ------- =_aaaaaaaaaa0--
 451 EOF
 452
 453 run_prog mhfixmsg last -outfile "$actual"
 454 check "$expected" "$actual"
 455
 456
 457 # check -decode with more complicated content structure
 458 cat >$expected <<EOF
 459 To: recipient@example.com
 460 From: sender@example.com
 461 Subject: mhfixmsg decode test 2
 462 MIME-Version: 1.0
 463 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
 464
 465 This is additional content before the first subpart of the multipart.
 466
 467 ------- =_aaaaaaaaaa0
 468 Content-Type: multipart/related;
 469     type="multipart/alternative";
 470     boundary="subpart__1.1"
 471
 472 --subpart__1.1
 473 Content-Type: text/plain; charset="iso-8859-1"
 474 Content-Disposition: attachment; filename="test1.txt"
 475
 476 This is the first text/plain part, in a subpart.
 477
 478 --subpart__1.1--
 479
 480 This is additional content after the last subpart of the multipart.
 481
 482 ------- =_aaaaaaaaaa0
 483 Content-Type: text/plain; charset="iso-8859-1"
 484 Content-Disposition: attachment; filename="test2.txt"
 485 Content-MD5: kq+Hnc2SD/eKwAnkFBDuEA==
 486 Content-Transfer-Encoding: 8bit
 487
 488 This is the second text/plain part.
 489
 490 ------- =_aaaaaaaaaa0
 491 Content-Type: text/plain; charset="iso-8859-1"
 492 Content-Disposition: attachment; filename="test3.txt"
 493
 494 This is the third text/plain part.
 495
 496 ------- =_aaaaaaaaaa0
 497 Content-Type: text/plain; charset="iso-8859-1"; name="test4.txt"
 498 Content-Disposition: attachment; filename="test4.txt"
 499 Content-Transfer-Encoding: 8bit
 500
 501 This is the fourth text/plain part.
 502
 503 ------- =_aaaaaaaaaa0--
 504
 505 This is additional content after the last subpart of the multipart.
 506 EOF
 507
 508 cat >`mhpath new` <<EOF
 509 To: recipient@example.com
 510 From: sender@example.com
 511 Subject: mhfixmsg decode test 2
 512 MIME-Version: 1.0
 513 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
 514
 515 This is additional content before the first subpart of the multipart.
 516
 517 ------- =_aaaaaaaaaa0
 518 Content-Type: multipart/related;
 519     type="multipart/alternative";
 520     boundary="subpart__1.1"
 521
 522 --subpart__1.1
 523 Content-Type: text/plain; charset="iso-8859-1"
 524 Content-Disposition: attachment; filename="test1.txt"
 525
 526 This is the first text/plain part, in a subpart.
 527
 528 --subpart__1.1--
 529
 530 This is additional content after the last subpart of the multipart.
 531
 532 ------- =_aaaaaaaaaa0
 533 Content-Type: text/plain; charset="iso-8859-1"
 534 Content-Disposition: attachment; filename="test2.txt"
 535 Content-MD5: kq+Hnc2SD/eKwAnkFBDuEA==
 536 Content-Transfer-Encoding: quoted-printable
 537
 538 This is the second text/plain part.
 539
 540 ------- =_aaaaaaaaaa0
 541 Content-Type: text/plain; charset="iso-8859-1"
 542 Content-Disposition: attachment; filename="test3.txt"
 543
 544 This is the third text/plain part.
 545
 546 ------- =_aaaaaaaaaa0
 547 Content-Type: text/plain; charset="iso-8859-1"; name="test4.txt"
 548 Content-Disposition: attachment; filename="test4.txt"
 549 Content-Transfer-Encoding: base64
 550
 551 VGhpcyBpcyB0aGUgZm91cnRoIHRleHQvcGxhaW4gcGFydC4K
 552
 553 ------- =_aaaaaaaaaa0--
 554
 555 This is additional content after the last subpart of the multipart.
 556 EOF
 557 run_prog mhfixmsg last -outfile "$actual"
 558 check "$expected" "$actual"
 559
 560
 561 # check attempted -decode of binary text
 562 #### Generated the encoded text below with:
 563 ####   $ printf '\x0d\xbd\xb2=\xbc\n' | base64
 564 cat >`mhpath new` <<EOF
 565 To: recipient@example.com
 566 From: sender@example.com
 567 Subject: mhfixmsg attempted binary decode test
 568 MIME-Version: 1.0
 569 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
 570
 571 ------- =_aaaaaaaaaa0
 572 Content-Type: text/plain; charset="iso-8859-1"; name="square.txt"
 573 Content-Transfer-Encoding: base64
 574
 575 Db2yPbwK
 576
 577 ------- =_aaaaaaaaaa0--
 578 EOF
 579
 580 cp -p `mhpath last` "$expected"
 581 set +e
 582 run_prog mhfixmsg last
 583 set -e
 584 check `mhpath last` "$expected" 'keep first'
 585
 586
 587 # check -decode of binary text
 588 printf "%s\x0d\xbd\xb2=\xbc%s" "To: recipient@example.com
 589 From: sender@example.com
 590 Subject: mhfixmsg binary decode test
 591 MIME-Version: 1.0
 592 Content-Type: multipart/mixed; boundary=\"----- =_aaaaaaaaaa0\"
 593
 594 ------- =_aaaaaaaaaa0
 595 Content-Type: text/plain; charset=\"iso-8859-1\"; name=\"square.txt\"
 596 Content-Transfer-Encoding: binary
 597
 598 " "
 599
 600 ------- =_aaaaaaaaaa0--
 601 " >"$expected"
 602 ## output_content() in mhoutsbr.c can't handle binary content.
 603 ## mhfixmsg last -decodetext binary -outfile "$actual"
 604 ## check "$expected" "$actual"
 605 rm -f "$expected"
 606 rmm last
 607
 608
 609 # check that -reformat succeeds when decode of binary text fails
 610 prepare_space >"$expected" <<'EOF'
 611 MIME-Version: 1.0
 612 Date: Thu, 11 Apr 2013 02:47:08 -0700
 613 To: <me@example.com>
 614 From: <sender@example.com>
 615 Subject: body requires binary encoding
 616 Content-Type: multipart/alternative; boundary="----=_nmh-multipart"
 617
 618 ------=_nmh-multipart
 619 Content-Type: text/plain; charset="ISO-8859-1"
 620 Content-Transfer-Encoding: 8bit
 621
 622 Mile                                     $0.00
 623 Time                                    $78.71
 624 State Tax                                $5.90
 625 Vehicle License Fee                      $1.84
 626 State Txn Tax                            $6.00
 627
 628 ------=_nmh-multipart
 629 Content-Type: text/html; charset="ISO-8859-1"
 630 Content-Transfer-Encoding: quoted-printable
 631
 632 <body>
 633 EOF
 634
 635 cat >`mhpath new` <<'EOF'
 636 MIME-Version: 1.0
 637 Content-Type: text/html; charset="ISO-8859-1"
 638 Content-Transfer-Encoding: quoted-printable
 639 Date: Thu, 11 Apr 2013 02:47:08 -0700
 640 To: <me@example.com>
 641 From: <sender@example.com>
 642 Subject: body requires binary encoding
 643
 644 <body>
 645 <table width=3D"325" border=3D"0" cellspacing=3D"0" cellpadding=3D"0">
 646 <tr><td><font face=3D"Arial, Helvetica, sans-serif" color=3D"#333333" size=
 647 =3D"2"><strong>Mile</strong></font></td><td height=3D"3">&nbsp;</td><td ali=
 648 gn=3D"right"><font face=3D"Arial, Helvetica, sans-serif" color=3D"#333333" =
 649 size=3D"2">$0.00</font></td></tr><tr><td><font face=3D"Arial, Helvetica, sa=
 650 ns-serif" color=3D"#333333" size=3D"2"><strong>Time</strong></font></td><td=
 651  height=3D"3">&nbsp;</td><td align=3D"right"><font face=3D"Arial, Helvetica=
 652 , sans-serif" color=3D"#333333" size=3D"2">$78.71</font></td></tr><tr><td><=
 653 font face=3D"Arial, Helvetica, sans-serif" color=3D"#333333" size=3D"2"><st=
 654 rong>State Tax</strong></font></td><td height=3D"3">&nbsp;</td><td align=3D=
 655 "right"><font face=3D"Arial, Helvetica, sans-serif" color=3D"#333333" size=
 656 =3D"2">$5.90</font></td></tr><tr><td><font face=3D"Arial, Helvetica, sans-s=
 657 erif" color=3D"#333333" size=3D"2"><strong>Vehicle License Fee</strong></fo=
 658 nt></td><td height=3D"3">&nbsp;</td><td align=3D"right"><font face=3D"Arial=
 659 , Helvetica, sans-serif" color=3D"#333333" size=3D"2">$1.84</font></td></tr=
 660 ><tr><td><font face=3D"Arial, Helvetica, sans-serif" color=3D"#333333" size=
 661 =3D"2"><strong>State Txn Tax</strong></font></td><td height=3D"3">&nbsp;</t=
 662 d><td align=3D"right"><font face=3D"Arial, Helvetica, sans-serif" color=3D"=
 663 #333333" size=3D"2">$6.00</font></td></tr>
 664
 665 </body>
 666 </html>
 667 EOF
 668
 669 if [ $can_reformat_texthtml -eq 1 ]; then
 670   #### lynx inserts multiple blank lines, so squeeze them.
 671   #### Truncate to avoid comparing the html portion because it can
 672   #### get reformatted.
 673   run_prog mhfixmsg last -outfile - | squeeze_lines | head -22 >"$actual"
 674   check "$expected" "$actual" 'ignore space'
 675 else
 676   cp -p "$MH_TEST_DIR/Mail/inbox/15" "$MH_TEST_DIR/Mail/inbox/15.backup"
 677   rm -f "$expected"
 678 fi
 679
 680
 681 # check -textcodeset
 682 # Also checks preservation of attributes after one (charset) that is
 683 # modified.
 684 cat >"$expected" <<EOF
 685 To: recipient@example.com
 686 From: sender@example.com
 687 Subject: mhfixmsg textcodeset test
 688 MIME-Version: 1.0
 689 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
 690
 691 ------- =_aaaaaaaaaa0
 692 Content-Type: text/plain; charset="utf-8"; name="square.txt"
 693 Content-Disposition: attachment; filename="square.txt"
 694 Content-Transfer-Encoding: 8bit
 695
 696 ½²=¼
 697
 698 ------- =_aaaaaaaaaa0--
 699 EOF
 700
 701 #### Generated the encoded text below with:
 702 ####   $ printf '\xbd\xb2=\xbc\n' | base64
 703 cat >`mhpath new` <<EOF
 704 To: recipient@example.com
 705 From: sender@example.com
 706 Subject: mhfixmsg textcodeset test
 707 MIME-Version: 1.0
 708 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
 709
 710 ------- =_aaaaaaaaaa0
 711 Content-Type: text/plain; charset="iso-8859-1"; name="square.txt"
 712 Content-Disposition: attachment; filename="square.txt"
 713 Content-Transfer-Encoding: base64
 714
 715 vbI9vAo=
 716
 717 ------- =_aaaaaaaaaa0--
 718 EOF
 719
 720 set +e
 721 run_prog mhfixmsg last -textcodeset utf-8 -outfile "$actual" 2>"$actual.err"
 722 if grep "mhfixmsg: Can't convert .* to .* without iconv" "$actual.err" \
 723   >/dev/null; then
 724   echo "$0: skipping -textcodeset check because nmh was built without iconv"
 725   rm -f "$expected" "$actual" "$actual.err"
 726 else
 727   check "$expected" "$actual"
 728   rm "$actual.err"
 729 fi
 730 set -e
 731
 732
 733 # check -nofixboundary
 734 cat >"$expected" <<EOF
 735 EOF
 736
 737 cat >`mhpath new` <<EOF
 738 Date: Fri, 13 May 2011 08:21:12 -0500
 739 Content-Type: multipart/alternative;
 740         boundary="----=_NextPart_000_1781A17_01CC1147.81E9467A"
 741 Content-Transfer-Encoding: 8bit
 742 MIME-Version: 1.0
 743 From: <sender@example.com>
 744 To: <recipient@example.com>
 745 Subject: mhfixmsg bad boundary test
 746
 747 This is a multi-part message in MIME format.
 748
 749 ------=_NextPart_000_1781A1A_01CC1147.81EBA8D4
 750 Content-Type: text/plain
 751
 752 The boundaries of this part don't match the header boundary.
 753
 754 ------=_NextPart_000_1781A1A_01CC1147.81EBA8D4--
 755 EOF
 756
 757 cp -p `mhpath last` `mhpath new`
 758
 759 run_test 'mhfixmsg last -nofixboundary' ''
 760 check "$MH_TEST_DIR"/Mail/inbox/17 "$MH_TEST_DIR"/Mail/inbox/18 'keep first'
 761
 762
 763 # check that message is not output when fed through stdin
 764 run_prog mhfixmsg -file - -verbose <`mhpath last` >"$actual" 2>"$actual.err"
 765 check "$expected" "$actual"
 766 if grep "mhfixmsg: $MH_TEST_DIR/Mail/.*, fix multipart boundary" \
 767    "$actual.err" >/dev/null; then
 768   rm -f "$actual.err"
 769 else
 770   echo "$0: test failed, output is in $actual.err."
 771   failed=`expr ${failed:-0} + 1`
 772 fi
 773
 774
 775 # check fixup of erroneous boundary in multipart (-fixboundary,
 776 # enabled by default)
 777 # check -verbose
 778 cat >"$expected" <<EOF
 779 Date: Fri, 13 May 2011 08:21:12 -0500
 780 Content-Type: multipart/alternative;
 781         boundary="----=_NextPart_000_1781A1A_01CC1147.81EBA8D4"
 782 Content-Transfer-Encoding: 8bit
 783 MIME-Version: 1.0
 784 From: <sender@example.com>
 785 To: <recipient@example.com>
 786 Subject: mhfixmsg bad boundary test
 787
 788 This is a multi-part message in MIME format.
 789
 790 ------=_NextPart_000_1781A1A_01CC1147.81EBA8D4
 791 Content-Type: text/plain
 792
 793 The boundaries of this part don't match the header boundary.
 794
 795 ------=_NextPart_000_1781A1A_01CC1147.81EBA8D4--
 796 EOF
 797
 798 run_test 'mhfixmsg last -outfile '"$actual"' -verbose' \
 799          "mhfixmsg: 17, fix multipart boundary"
 800 check "$expected" "$actual"
 801
 802
 803 # check that text/plain part is added to lone text/html in multipart/related
 804 prepare_space >"$expected" <<EOF
 805 MIME-Version: 1.0
 806 Date: Tue, 26 Feb 2013 18:07:20 -0600
 807 Subject: multipart/related, not /alternative
 808 Content-Type: multipart/related;
 809         boundary="----=_Part_90310_101292502.1"
 810
 811 ------=_Part_90310_101292502.1
 812 Content-Type: multipart/alternative; boundary="----=_nmh-multipart1"
 813
 814 ------=_nmh-multipart1
 815 Content-Type: text/plain; charset="us-ascii"
 816 Content-Transfer-Encoding: 7bit
 817
 818 This is the real content.
 819
 820 ------=_nmh-multipart1
 821 Content-Type: text/html; charset="us-ascii"
 822 Content-Transfer-Encoding: 7bit
 823
 824 <html><head>
 825     <meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
 826     <title>HTML Content</title>
 827   </head>
 828   <body>
 829     This is the real content.
 830   </body>
 831 </html>
 832
 833 ------=_nmh-multipart1--
 834
 835 ------=_Part_90310_101292502.1
 836 Content-Type: text/plain; charset="us-ascii"
 837 Content-Transfer-Encoding: 7bit
 838
 839 Your email client does not support HTML messages
 840
 841 ------=_Part_90310_101292502.1--
 842 EOF
 843
 844 cat >`mhpath new` <<EOF
 845 MIME-Version: 1.0
 846 Date: Tue, 26 Feb 2013 18:07:20 -0600
 847 Subject: multipart/related, not /alternative
 848 Content-Type: multipart/related;
 849         boundary="----=_Part_90310_101292502.1"
 850
 851 ------=_Part_90310_101292502.1
 852 Content-Type: text/html; charset="us-ascii"
 853 Content-Transfer-Encoding: 7bit
 854
 855 <html><head>
 856     <meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
 857     <title>HTML Content</title>
 858   </head>
 859   <body>
 860     This is the real content.
 861   </body>
 862 </html>
 863 ------=_Part_90310_101292502.1
 864 Content-Type: text/plain; charset="us-ascii"
 865 Content-Transfer-Encoding: 7bit
 866
 867 Your email client does not support HTML messages
 868 ------=_Part_90310_101292502.1--
 869 EOF
 870
 871 if [ $can_reformat_texthtml -eq 1 ]; then
 872   #### lynx inserts multiple blank lines, so squeeze them.
 873   run_prog mhfixmsg last -outfile - | squeeze_lines >"$actual"
 874   check "$expected" "$actual" 'ignore space'
 875 else
 876   rm -f "$expected"
 877 fi
 878
 879
 880 # check handling of rfc822 message type
 881 cat >"$expected" <<EOF
 882 From: Test <test@example.com>
 883 To: Some User <user@example.com>
 884 Date: Fri, 29 Sep 2006 00:00:00
 885 Message-Id: @test.nmh
 886 Subject: message with message/rfc822 attachment
 887 MIME-Version: 1.0
 888 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaaa0"
 889
 890 and some garbage before the attachment
 891
 892 ------- =_aaaaaaaaaa0
 893 Content-Type: message/rfc822; name="1552"; charset="us-ascii"
 894 Content-Description: 1552
 895 Content-Disposition: attachment; filename="1552"
 896
 897 From: Test <test@example.com>
 898 To: <another_user@example.com>
 899 Date: Thu, 28 Sep 2006 00:00:00
 900 Message-Id: @test.nmh
 901 Subject: message/rfc822 attachment
 902
 903 This is an RFC-822 message.
 904
 905 ------- =_aaaaaaaaaa0--
 906
 907 and some garbage at the end
 908 EOF
 909
 910 cat >`mhpath new` <<EOF
 911 From: Test <test@example.com>
 912 To: Some User <user@example.com>
 913 Date: Fri, 29 Sep 2006 00:00:00
 914 Message-Id: @test.nmh
 915 Subject: message with message/rfc822 attachment
 916 MIME-Version: 1.0
 917 Content-Type: multipart/mixed; boundary="----- =_aaaaaaaaa0"
 918
 919 and some garbage before the attachment
 920
 921 ------- =_aaaaaaaaaa0
 922 Content-Type: message/rfc822; name="1552"; charset="us-ascii"
 923 Content-Description: 1552
 924 Content-Disposition: attachment; filename="1552"
 925
 926 From: Test <test@example.com>
 927 To: <another_user@example.com>
 928 Date: Thu, 28 Sep 2006 00:00:00
 929 Message-Id: @test.nmh
 930 Subject: message/rfc822 attachment
 931
 932 This is an RFC-822 message.
 933
 934 ------- =_aaaaaaaaaa0--
 935
 936 and some garbage at the end
 937 EOF
 938
 939 run_test 'mhfixmsg last -outfile '"$actual" ''
 940 check "$expected" "$actual"
 941
 942
 943 # check stripping of CRs from ASCII text context
 944 cat >"$expected" <<EOF
 945 MIME-Version: 1.0
 946 From: sender@example.com
 947 To: recipient@example.com
 948 Subject: message with CR's
 949 Date: Mon, 29 Apr 2013 11:51:45 -0400
 950
 951 There are two CR-LF pairs at the end of this sentence.
 952
 953 EOF
 954
 955 cat >`mhpath new` <<'EOF'
 956 MIME-Version: 1.0
 957 From: sender@example.com
 958 To: recipient@example.com
 959 Subject: message with CR's
 960 Date: Mon, 29 Apr 2013 11:51:45 -0400
 961
 962 There are two CR-LF pairs at the end of this sentence.
 963
 964 EOF
 965
 966 run_prog mhfixmsg last -outfile "$actual"
 967 check "$expected" "$actual"
 968
 969
 970 # check -replacetextplain
 971 prepare_space >"$expected" <<EOF
 972 To: recipient@example.com
 973 From: sender@example.com
 974 Subject: mhfixmsg replacement of bad text/plain part test
 975 MIME-Version: 1.0
 976 Content-Type: multipart/alternative; boundary="----=_Part_876302"
 977
 978 ------=_Part_876302
 979 Content-Type: text/plain; charset="UTF-8"
 980 Content-Transfer-Encoding: 8bit
 981
 982 Yes, the text/plain part really was empty.
 983
 984 ------=_Part_876302
 985 Content-Type: text/html; charset="UTF-8"
 986 Content-Transfer-Encoding: 8bit
 987 Content-Disposition: inline
 988
 989 <html><head>
 990 <title>eticket</title>
 991 </head>
 992 <body>
 993   Yes, the text/plain part really was empty.
 994 </body>
 995 </html>
 996
 997 ------=_Part_876302--
 998 EOF
 999
1000 cat >`mhpath new` <<'EOF'
1001 To: recipient@example.com
1002 From: sender@example.com
1003 Subject: mhfixmsg replacement of bad text/plain part test
1004 MIME-Version: 1.0
1005 Content-Type: multipart/alternative; boundary="----=_Part_876302"
1006
1007 ------=_Part_876302
1008 Content-Type: text/plain; charset="iso-8859-15"
1009 Content-Transfer-Encoding: 7bit
1010 Content-Disposition: inline
1011
1012
1013
1014 ------=_Part_876302
1015 Content-Type: text/html; charset="UTF-8"
1016 Content-Transfer-Encoding: 8bit
1017 Content-Disposition: inline
1018
1019 <html><head>
1020 <title>eticket</title>
1021 </head>
1022 <body>
1023   Yes, the text/plain part really was empty.
1024 </body>
1025 </html>
1026
1027 ------=_Part_876302--
1028 EOF
1029
1030 if [ $can_reformat_texthtml -eq 1 ]; then
1031   #### lynx inserts multiple blank lines, so squeeze them.
1032   run_prog mhfixmsg last -replacetextplain -outfile - | \
1033     squeeze_lines > "$actual"
1034   check "$expected" "$actual" 'ignore space'
1035 else
1036   rm -f "$expected"
1037 fi
1038
1039
1040 # check -noreplacetextplain
1041 cat >"$expected" <<EOF
1042 To: recipient@example.com
1043 From: sender@example.com
1044 Subject: mhfixmsg replacement of bad text/plain part test
1045 MIME-Version: 1.0
1046 Content-Type: multipart/alternative; boundary="----=_Part_876302"
1047
1048 ------=_Part_876302
1049 Content-Type: text/plain; charset="iso-8859-15"
1050 Content-Transfer-Encoding: 7bit
1051 Content-Disposition: inline
1052
1053
1054
1055 ------=_Part_876302
1056 Content-Type: text/html; charset="UTF-8"
1057 Content-Transfer-Encoding: 8bit
1058 Content-Disposition: inline
1059
1060 <html><head>
1061 <title>eticket</title>
1062 </head>
1063 <body>
1064   Yes, the text/plain part really was empty.
1065 </body>
1066 </html>
1067
1068 ------=_Part_876302--
1069 EOF
1070
1071 run_prog mhfixmsg last -replacetextplain -noreplacetextplain -outfile "$actual"
1072 check "$expected" "$actual"
1073
1074
1075 # check rmmproc
1076 cat >"$MH_TEST_DIR/Mail/rmmproc" <<'EOF'
1077 mv "$1" "$1.backup"
1078 EOF
1079 chmod a+x "${MH_TEST_DIR}/Mail/rmmproc"
1080 echo "rmmproc: ${MH_TEST_DIR}/Mail/rmmproc" >>"$MH"
1081 cp "${MH_TEST_DIR}/Mail/inbox/15" "${MH_TEST_DIR}/Mail/inbox/15.original"
1082
1083 run_test 'mhfixmsg 15' ''
1084 check "${MH_TEST_DIR}/Mail/inbox/15.backup" \
1085       "${MH_TEST_DIR}/Mail/inbox/15.original"
1086
1087
1088 # check -normmproc
1089 cp "${MH_TEST_DIR}/Mail/inbox/19" "${MH_TEST_DIR}/Mail/inbox/20"
1090
1091 run_test 'mhfixmsg 19 -normmproc'
1092 check "${MH_TEST_DIR}/Mail/inbox/20" \
1093       "${MH_TEST_DIR}/Mail/inbox/,19" 'keep first'
1094
1095
1096 # check -rmmproc
1097 run_test 'mhfixmsg 20 -rmmproc true'
1098 if test -f '${MH_TEST_DIR}/Mail/inbox/20.backup'; then
1099   echo check of mhfixmsg -rmmproc FAILED, should not have created backup file
1100   failed=`expr ${failed:-0} + 1`
1101 fi
1102
1103
1104 # make sure there are no tmp files left over
1105 find "$MH_TEST_DIR/Mail" \( -name 'mhfix*' -o -name ',mhfix*' \) -print \
1106   >"$actual"
1107 cat >"$expected" <<EOF
1108 EOF
1109
1110 check "$expected" "$actual"
1111
1112
1113 exit $failed