1 2005-11-13 Oliver Kiddle <okiddle@yahoo.co.uk>
3 * bug #739: Makefile.in: install target now depends on all to avoid
4 problem on case-insensitive file systems with the INSTALL file
6 2005-11-10 Josh Bressers <josh@bress.net>
8 * Fedora Bug #172838: configure.in: Fix the AC_PATH_PROG default when
9 sendmail isn't found during build.
11 2005-11-09 Peter Maydell <pmaydell@chiark.greenend.org.uk>
13 * h/aliasbr.h: fix a non-ANSI prototype.
15 2005-11-08 Oliver Kiddle <okiddle@yahoo.co.uk>
17 * Simon Burge: acconfig.h, configure.in, uip/rcvtty.c, uip/slocal.c:
18 fix to handle getutent() on NetBSD
20 * INSTALL, README, docs/README.about, man/nmh.man: update most
21 references to the web page and mailing list locations
23 * bug #10230: etc/Makefile.in, man/Makefile.in, uip/Makefile.in:
24 Michael De La Rue: prepend DESTDIR to install locations
26 * configure.in, */Makefile.in, mts/smtp/smtp.c: replace obsolete
29 2005-11-06 Peter Maydell <pmaydell@chiark.greenend.org.uk>
31 * sbr/fmt_rfc2047.c, sbr/fmt_scan.c, h/prototypes.h: fix various
32 possible overruns of the buffers in fmt_scan() which would cause
33 crashes if scan was run with '-width 16536' or similar.
35 * uip/popsbr.c: fix compile error which only showed up if nmh
36 was configured with --enable-apop.
38 * Debian Bug# 245932, RedHat Bug# 172388: uip/mhparse.c: don't
39 crash when handling a multipart MIME message with an invalid
40 Content-Type header (file handle was being fclose()d twice).
42 * sbr/Makefile.in: adjust lex command to work on both old and
45 * configure.in: add an AC_PREREQ() so autoconf 2.13 gives a helpful
46 error message and the Debian autoconf-version-guessing wrapper
47 doesn't guess wrongly.
49 2005-11-02 Oliver Kiddle <okiddle@yahoo.co.uk>
51 * Debian Bug# 320069: Nick Rusnov: uip/popsbr.c: fail when
52 kpop connection attempted without KPOP support compiled in
54 * Debian Bug# 320090: Nick Rusnov: sbr/Makefile.in: fix for newer
55 version of flex and remove autogenerated file from cvs
57 * patch #1155: uip/flist.c: speed up flist by skipping stat on
58 files with numbers as names
60 * docs/Makefile.in: include new files in distribution
62 2005-10-11 Bill Wohler <wohler@newt.com>
64 * docs/FAQ: fold questions into MH FAQ and distribute that instead
66 2005-10-05 Oliver Kiddle <okiddle@yahoo.co.uk>
68 * Harald Geyer: h/mh.h, uip/replsbr.c: back out previous change
69 (fork/vfork) and replace with code that handles the issue directly
71 2005-05-18 Oliver Kiddle <okiddle@yahoo.co.uk>
73 * Debian Bug# 143485: Nick Rusnov: h/mh.h: use fork instead of
76 * Debian Bug# 261592: Harald Geyer: uip/mhlsbr.c, uip/replsbr.c:
77 test/report error writing to stdout
79 * mts/smtp/smtp.c, uip/popsbr.c: correct SASL include file locations
81 * docs/COMPLETION-BASH: bash completion definitions from Debian
83 * patch #2863: savannah@brisammon.fastmail.fm: sbr/folder_read.c:
84 fix a bug affecting AFS where nmh was setting the READONLY flag
85 for a folder even when you do have write access to the folder
87 * Carl Mummert: h/fmt_compile.h, man/mh-format.man,
88 sbr/fmt_compile.c, sbr/fmt_scan.c: add unquote() function for
89 removing quotes from RFC-2822 encoded headers
91 2005-02-23 Oliver Kiddle <okiddle@yahoo.co.uk>
93 * use iconv to convert RFC-2047 encoded headers to the
94 character set used by the current locale
96 * sbr/folder_read.c fix Debian bug #202667: crash when a
97 message's filename overflows an int when converted
99 * Updated config.guess and config.sub to the most recent
100 versions (from automake 1.9.5)
102 2005-02-21 Oliver Kiddle <okiddle@yahoo.co.uk>
104 * sbr/getpass.c fix bug where inc crashed on failing to reopen
107 2005-01-27 Oliver Kiddle <okiddle@yahoo.co.uk>
109 * Added -proxy option to inc and msgchk. Based on old patch
110 from Michael Richardson.
112 * On systems where it is available, use nl_langinfo to get the
113 character set if MM_CHARSET is unset
115 2005-01-21 Oliver Kiddle <okiddle@yahoo.co.uk>
117 * sbr/check_charset.c US-ASCII is a subset of UTF-8 so can be
118 handled directly when UTF-8 is being used
120 2004-12-17 Oliver Kiddle <okiddle@yahoo.co.uk>
122 * uip/mhmisc.c Fix -part option to mhshow/mhlist/mhstore to
123 find sub-parts of the specified part
125 2004-11-19 Jon Steinhart <jon@fourwinds.com>
127 * h/prototypes.h, sbr/folder_addmsg.c, uip/mhstoresbr.c,
128 uip/rcvstore.c, uip/refile.c: Added mail directory argument to
129 folder_addmsg in order to make it possible to provide a path to
130 the ext_hook call that is mailpath-based. A problem existed when
131 a folder was a symbolic link and the pwd call would return the
132 path relative to the filesystem, not to mailpath. A new argument
133 was needed because there was otherwise no reasonable way to get
136 2004-11-16 Jon Steinhart <jon@fourwinds.com>
138 * sbr/folder_pack.c: Fixed problem where the refile hook was being
139 called after a message was renamed so that it wasn't around for
140 the hook. The hook is now called before the message file is
143 * sbr/folder_addmsg.c: Fixed wrong directory for hook when
144 refiling with -src option.
146 2004-10-15 Jon Steinhart <jon@fourwinds.com>
148 * uip/sortm.c: Fixed calling of external hooks.
150 2004-10-12 Jon Steinhart <jon@fourwinds.com>
152 * uip/inc.c: Fixed another weird bug caused by the static
153 mailpath being overwritten.
155 * uip/sendsbr.c: Fixed bug that caused anno to mangle headers.
157 * sbr/lock_file.c: Fixed strange bug that prevented a lock from
158 ever being obtained if getting it failed the first time. The
159 problem was that the string of XXXXXX that is required by
160 mkstemp() was overwritten the first time through, and so all
161 subsequent times failed because mkstemp() failed. The fix
162 reinitializes the tmp file string.
164 * uip/inc.c: Fixed bug in which the static maildir was overwritted
165 if a format string was read from the profile.
167 * sbr/folder_delmsgs.c: Fixed bug that was producing an incorrect
168 path for the external hook.
170 2003-10-06 Glenn Burkhardt <glenn@aoi-industries.com>
172 * uip/slocal.c, configure.in: db configuration fix for Debian; yet
173 another location for ndbm.
175 2003-09-30 Glenn Burkhardt <glenn@aoi-industries.com>
177 * Fix 'pick' so handling of options "-list" and "-seq" are
179 * Fix 'inc' realloc error when bringing in more than 100 msgs
181 * Patches submitted by Nick Rusnov from Debian archive applied:
184 136976 - Handle binary content messages
185 143427 - mh-format.man typo
186 144098 - 'spost; should have same behavior as 'post'
187 w.r.t. mts.conf masquerade line
188 149745 - slocal ignores 'N' result of previous command
189 152728 - increase SMTP timeouts to conform to RFC 1123
190 The timeouts suggested by the RFC seem long
191 to me - but the RFC is still listed as active.
192 181867 - typo for nmh.man
194 2003-08-10 Jeffrey C Honig <jch@honig.net>
196 * Fix problem where parsing of address/date fields in fmt_compile
197 is optimized to the first instance. The first instance may be in
198 contitional code which will result in cached data to
199 be used. Instead, convert c_flags to a flags field from a boolean
200 and parse on the first use.
201 * Remove some unused flag bits.
203 Fri Jul 01 22:02:00 2003 Glenn Burkhardt <glenn@aoi-industries.com>
205 * Applied fixes for configuration problems with Solaris and
206 systems with gdbm instead of db1 (includes bug #2024)
208 #578 - repl leaks umask
209 #1393 - sortm core dumps
210 #1650 - msh leaks file descriptors
211 #1730 - Double free() in mhfree.c:free_encoding()
212 #3356 - In-Reply-To header in default replcomps should be
214 * Revised man page for mh-format (bug #2031)
215 * New replcomps, etc, with Fcc: +outbox in default versions
217 Sat Mar 17 03:18:15 2001 Dan Harkless <dan-nmh@dilvish.speed.net>
219 * Ken Hornstein's configure.in Cyrus SASL checks were doing
220 `x"$with_cyrus_sasl" != "no"' instead of `... != x"no"'.
222 Tue Mar 06 21:04:27 2001 Dan Harkless <dan-nmh@dilvish.speed.net>
224 * Found some historical information about MH in RFC 808.
225 Supplemented it with info from Jerry Peek's MH book and added it
226 to docs/README.about.
228 Tue Feb 6 20:35:40 2001 Shantonu Sen <ssen@mit.edu>
230 * sbr/dtime.c Use the same Y2K correction code as dtimep.lex
232 * sbr/dtimep.lex Restrict the parser to accept either
233 a numerical timezone offset, or a symbolic one (e.g. EST),
234 but not both (Since "2000 -400 EDT" might cause a double
235 subtraction of 60 minutes if both are parsed. One should be
238 Mon Feb 05 20:22:54 2001 Dan Harkless <dan-nmh@dilvish.speed.net>
240 * -L isn't sufficient for specifying the path of the Cyrus SASL
241 shared library. That'll allow us to link successfully, but on
242 many/most OSes that won't allow us to find libsasl at runtime. On
243 Solaris, we need to specify the library path with -R as well (or
244 else the user will have to use the $LD_LIBRARY_PATH kludge, which
245 is considered harmful). This fix should be extended to other OSes
248 * Print whether we have SASL support in the "nmh configuration"
249 summary configure prints out.
251 * Say in README.developers to use `\date' in case anyone is like
252 me and has `date' aliased in their shell to use a nonstandard (but
253 subjectively more readable) format.
255 Thu Jan 25 21:15:52 2001 Shantonu Sen <ssen@mit.edu>
257 * man/mh-chart.man has updated synposes of
260 Tue Jan 23 20:26:15 2001 Shantonu Sen <ssen@mit.edu>
262 * etc/digestcomps tried to force dates into a
263 19xx when it's not necessary.
265 Fri Jan 19 21:22:08 2001 Shantonu Sen <ssen@mit.edu>
267 * First round of manpage updates finished. They
268 are standardized on -man macros, with minimal
271 * man/tmac.h.in is no longer needed, since the
272 manpages do not depend on them anymore. Note:
273 strict "man" programs that didn't allow ".so"
274 sourcing outside the man tree will now format
275 the man pages correctly.
277 * man/vmh.1 is no longer built, since uip/vmh isn't
279 Tue Jan 9 6:01:22 2001 Shantonu Sen <ssen@mit.edu>
281 * Finished manpages ali-prev
283 * Removed deprecated files from the repository.
284 Specifically, those rooted in zotnet/ and mts/sendmail
285 mts/mmdf. "cvs update -dP" will give a pruned directory
288 * Updated docs/Makefile.in to include README.manpages, and
289 uip/Makefile.in to include popi.c (which isn't being built,
290 though). This allows "make nmhdist" to create an archive that
291 is file-for-file identical to the current cvs repository.
293 Sun Dec 31 20:48:50 2000 Shantonu Sen <ssen@mit.edu>
295 * Create docs/README.manpages, which details
296 the formatting rules I've been using.
300 Sat Dec 30 9:50:13 2000 Shantonu Sen <ssen@mit.edu>
302 * Created a new file "DATE" to hold the date
303 of the most recent nmh release. This date will be
304 used in the manpages.
306 * Updated docs/README.developers to add the step
307 of updating DATE. Also, updated configure to
308 read in the contents of the file as the variable
311 * Started work on updating man pages, with only
312 ali finished so far. Changes: 1) no dependence
313 on an external macro file, 2) uses only
314 -man macros (although I may be mistaken in this),
315 3) syntax in the SYNOPSIS is a little more
316 in line with standard UNIX documentation, such as
317 bold flags and italicized parameters.
319 Sun Dec 24 10:06:30 2000 Shantonu Sen <ssen@mit.edu>
321 * Updated INSTALL with information about the
322 --with-locking option.
324 * Fixed the Hesiod tests in configure.in. In
325 systems where res_send was in -lresolv, this
326 information was not being communicated to the
327 HESIOD_LIBS var. Now, if res_send is not found
328 in the default libraries, it's assumed to be
329 in -lresolv, and thus -lresolv is appended to
330 HESIOD_LIBS, which will need that to avoid
331 undefined symbols problems.
333 * Fixed the Kerberos tests in configure.in. New
334 versions of Kerberos 5 have renamed -lcrypto
335 to -lk5crypto (circa krb5 1.1 or thereabouts). The
336 new test tries to determine if -lk5crypto exists. If so,
337 this is a new krb5 system. If not, test for -lcrypto
338 and the rest of old krb5. If that fails, look
339 for a genuine krb4 installation.
341 Fri Dec 22 22:08:51 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
343 * -apop and -noapop were not documented in msgchk.man.
344 -snoop was documented but didn't appear in the usage SYNOPSIS.
346 Fri Dec 22 23:42:16 2000 Shantonu Sen <ssen@mit.edu>
348 * Made a new ./configure option called
349 "--with-locking" that allows the file
350 locking mechanism to be chosen there instead of
351 requiring a manual edit of config.h.
353 * If the option is not explicitly set, or an
354 invalid option is specified, "dot" locking is
355 chosen. Valid options are "dot", "fcntl",
356 "flock", and "lockf". We need a way to tell
357 the user that these are the valid options, and
358 change the flag "--with-locking" if it's not
361 Fri Dec 22 19:21:29 2000 Shantonu Sen <ssen@mit.edu>
363 * Remove the lex-specific memory hints at the
364 beginning of sbr/dtimep.lex. We've already
365 committed to supporting flex only, since
366 lex does not easily allow us to parse a single
367 string, as well as other problems documented
368 below and on nmh-workers.
370 * Added a switch statement to configure.in to
371 test for Mac OS X. If this is the case, LDFLAGS
372 should not contain "-s" since the linker rejects
375 * Updated MACHINES to include Mac OS X Public Beta,
376 as well as Linux 2.4 running glibc 2.2.
378 Wed Dec 20 16:00:46 2000 Shantonu Sen <ssen@mit.edu>
380 * Marked deprecated directories in docs/README.developers
381 as deprecated, with pointers to the new code location.
382 Eventually these deprecated directories should go away.
384 Tue Dec 19 19:16:37 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
386 * -apop and -noapop were not documented in inc.man. -snoop was
387 documented but didn't appear in the usage SYNOPSIS.
389 Thu Dec 14 14:32:09 2000 Shantonu Sen <ssen@mit.edu>
391 * Updated config.guess and config.sub to the most recent
392 versions on ftp://ftp.gnu.org/pub/gnu/config, dated
393 12-07-00. This should prevent configure from failing
394 on newer operating systems because config.{guess,sub}
395 couldn't correctly identify them.
397 Thu Dec 14 1:30:44 2000 Shantonu Sen <ssen@mit.edu>
399 * Fixed the circular dependency created when I moved
400 zotnet/mts to mts/generic and merged them into libmts.
401 mts/generic/client.c and mts/generic/mts.c are now in sbr/
402 (and thus in libmh), which makes libmh self-contained and
403 not depending on an external archive.
405 * All include statements now look for mts.h in h/. The
406 Makefiles and configure script have been modified so that
407 mts/generic is no longer built.
409 Mon Dec 11 22:08:07 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
411 * When Shantonu made the new libmts.a, he swapped $(MTSLIB) and
412 libmh.a in sbr/Makefile.in so that libmh.a comes first, but this
413 causes the build to fail on Solaris, because libmts.a has to get
414 ruserpass() out of libmh.a. Swapping them back to the way Ken
415 Hornstein's patch (which I applied on Jul 20) put them, with
416 libmh.a correctly coming second. If there are times when libmts.a
417 needs to come second, then it would appear there's a circular
418 dependency and someone (Shantonu?) did an mts merge incorrectly.
420 Fri Sep 8 01:36:23 2000 Shantonu Sen <ssen@mit.edu>
422 * Took out bad time textual time zones like BST and JST.
423 I found them online somewhere, but am not sure if they're
426 Fri Sep 8 00:36:48 2000 Shantonu Sen <ssen@mit.edu>
428 * Moved zotnet/mts to mts/generic. This code reorganization
429 makes the entire zotnet tree deprecated -- bboards is unneeded,
430 mf was was moved to sbr, tws was rewritten and moved to sbr, and
433 * Created a new static library called libmts.a used during
434 compilation which includes the generic mts code and the
435 smtp/sendmail code. This supercedes the functionality of the
436 old libsmtp.a and the remains of libzot.a.
438 * Updated header includes to reference the new location of mts.h
439 in mts/generic/mts.h. Also, update the configure and top-level
440 Makefile not to descend into zotnet. Also, they don't descend
441 into mts/mmdf and mts/sendmail (the sendmail code has been
442 merged into the smtp code).
444 * Added #include <h/nmh.h> to h/md5.h, since my compile was
445 complaining about implicitly-declared memcpy and memset, which
446 appear to be in strings.h. In any event, nmh.h should take care
449 * When doing a "make nmhdist", notice that the generated
450 snapshot does not include zotnet of the mts directories as noted
451 above. Since they are no longer compiled, and I don't see any
452 obvious code path to get to them, end-users should probably
453 not need them. If you think otherwise, turn Makefile generation
454 back on in configure.in and turn on recursion into those dirs
455 in the appropriate Makefile.in
457 Wed Sep 6 22:40:03 2000 Shantonu Sen <ssen@mit.edu>
459 * Tracked down the problem in the new dtimep where time
460 zones were being radically misreported. It was because the
461 parser knew about military time zones (such as M or E) but in
462 some cases did not know about the textual representation of
463 some zones (like MET). When it encountered one of these, the
464 date parser misread MET as the military time zone T (well, first
465 zone M, then E, and finally T). I took military zones out, and
466 things seem much better. Also, the default behavior of parsing
467 time zones appears to default to GMT in the absence of better
468 info, which is less bogus than assuming the mail came from the
469 current time zone, which was the behavior in 1.04.
471 Thu Aug 10 13:22:13 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
473 * Decided that limiting the message number columns to 3 on my
474 scan.MMDDYY and scan.YYYYMMDD (to try to regain space taken by
475 extra date info) was ill-conceived. It's not that tough to get
476 past 999 messages, though I imagine it's rather rare to exceed
477 9999. Changed these to 4. Also put the "replied / encrypted"
478 column back in YYYYMMDD -- I've never seen it show anything but a
479 space, but that space is useful if you use scan, grep, and awk
480 (with the default field separator) to grab message numbers (I know
481 -- pick should really be used for these purposes...).
483 Mon Aug 7 20:11:09 CEST 2000 Ruud de Rooij <ruud@ruud.org>
485 * Modify umask set by mhshow to enable user execute bit, so that
486 viewers that create temporary directories (e.g., lynx) will be
489 Thu Aug 03 17:14:08 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
491 * TODO: Allow multiple simultaneous differing contexts, probably
492 each tied to a parent (terminal) process.
494 Tue Aug 1 10:48:05 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
496 * Makefile install rules should not look for generated files in
497 the source tree -- this will happen to work when configuring and
498 building inside the source tree but will fail when using an
499 external build tree. Fixed etc/Makefile.in.
501 Mon Jul 24 16:20:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
503 * When Shantonu wrote the new, more portable dtimep.lex, he left
504 out the #ifdef DSTXXX stuff for some reason. Not a good idea, as
505 that code is required for proper printing of numeric-offset
506 timezones that have daylight saving time. Without that code,
507 -0700 during DST gets printed as MST instead of PDT.
509 * Renamed DSTXXX as ADJUST_NUMERIC_ONLY_TZ_OFFSETS_WRT_DST and
510 added an explanatory comment by its #definition.
512 * Updated README.developers with the fact that zotnet/tws is going away.
514 Thu Jul 20 20:30:52 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
516 * Moved Kimmo's new "--with-hash-backup" to be output with the
517 rest of the --with options in the configure --help output. Also,
518 people did not preserve my alphabetization of the --with options
519 when they added new ones. Re-alphabetized.
521 * One more pass at README.developers now that it's clear that my
522 previously-suggested one-line autoconf-file commit can cause
523 unnecessary local makes and an out-of-sync stamp-h.in file, but
524 would not cause problems for other people using the CVS files.
526 * Ken Hornstein's SASL patch was not integrated properly with
527 Ruud's new merged mts/sendmail code. Kimmo has since fixed nmh so
528 it compiles, but according to Ken, the SASL stuff still does not
529 work. Integrating a patch from him for this.
531 * Last pass at README.developers -- Kimmo's 5-step commit was
532 overkill. You only need 3 steps, since configure.in is the only
533 autoconf file with the RCS $Id keyword.
535 * Applied Kurt J. Lidl <lidl@eng.us.uu.net>'s $MAILHOST patch:
537 I have a small patch that would be nice to be included --
538 basically, it allows the usage of the "MAILHOST" environment
539 variable, without having to have HESIOD turned on. I need
540 this functionality for my environment, where we have identical
541 /usr/local on all my machines (so I cannot just hardcode into
542 the mts.conf file), and I have multiple POP mail servers for
545 Modified inc.man to reflect that along with "pophost:" and -host,
546 $MAILHOST can now activate POP mail inclusion as well.
548 * Fixed warnings from diff on first-time install of nmh. Also
549 added 'echo's clarifying the etc file installation activities.
551 Tue Jul 18 19:36:59 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
553 * Added the answer to Dan's question in README.developers.
555 Mon Jul 17 19:10:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
557 * Clarified and made some corrections to Kimmo's README.developers
558 changes (BTW, if anyone can explain why the RCS Ids are able to cause
559 problems with the dependencies, please fill in the explanation --
560 I never encountered a problem with the old single-commit method).
562 Sat Jul 15 23:13:49 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
564 * Add configure option --with-hash-backup so the backup prefix can
565 be easily changed from "," to "#".
567 * Simplified sbr/Makefile.in so that it works with any make.
569 * Use mkstemp in sbr/lock_file.c.
571 * Commits of autoconf-related files apparently can't all be done
572 in one shot due to RCS Ids changing when committing -- updated
575 Tue Jul 11 14:18:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
577 * Clarified post.man and send.man for those not completely up on
578 SASL terminology. "SASL encryption layers are not supported for
579 SMTP" means that encryption is supported for the authentication
580 but not for the subsequent data stream.
582 Sat Jul 8 01:36:19 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
584 * Applied Ken Hornstein <kenh@cmf.nrl.navy.mil>'s patches
585 implementing SASL support for POP3 and SMTP. If nmh is compiled
586 with SASL support, using the -sasl switch on the inc, msgchk,
587 post, and send commands will enable authentication encryption for
588 SMTP, and both authentication and data stream encryption for POP3.
590 Sat Jun 10 18:37:59 CEST 2000 Ruud de Rooij <ruud@ruud.org>
592 * Merged mts/sendmail functionality into mts/smtp; switching between
593 smtp and sendmail delivery method is now controlled by mts.conf.
595 * If tsort cannot deal with loops, in addition to defining tsort as
596 cat, also define lorder as echo.
598 * Removed uip/popi.c from list of sources.
600 Thu Jun 08 19:36:57 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
602 * New dtimep.lex didn't parse day names properly. Fixed. Also
603 clarified ambiguous comments preceding day_map[] array (from old
604 dtimep.lex) that probably led to the erroneous cp++ being added.
606 Wed Jun 7 20:52:33 CEST 2000 Ruud de Rooij <ruud@ruud.org>
608 * Added one more mkstemp invocation to uip/spost.c (which was in a
611 * Applied patch from Peter Maydell to clean up permissions handling
612 and error handling in uip/inc.c.
614 Mon Jun 5 22:10:07 CEST 2000 Ruud de Rooij <ruud@ruud.org>
616 * Use cat instead of tsort if tsort cannot deal with loops in its
617 input (which is the case for tsort from GNU textutils).
619 Mon Jun 5 21:14:36 CEST 2000 Ruud de Rooij <ruud@ruud.org>
621 * If lockfile is present, and its dotlockfile program is setgid,
622 inc does not need to be setgid.
624 Sun Jun 4 21:35:40 CEST 2000 Ruud de Rooij <ruud@ruud.org>
626 * Added autoconf test for Miquel van Smoorenburg's liblockfile
627 library, as found on Debian systems.
629 * Added liblockfile support to sbr/lock_file.c.
631 Wed May 31 7:19:30 2000 Shantonu Sen <ssen@mit.edu>
633 * Fixed up dtimep.lex a bit. Added back memory options for AIX to
634 increase available memory. Took out %option noyywrap, which
635 wasn't understood by AT&T lex, as well as the -i
636 case-insensitivity flag.
638 Wed May 31 07:40:45 2000 Doug Morris <doug@mhost.com>
640 * Added a lint target to the Makefiles and a check in autoconf
641 to determine whether lint or lclint exists on the system.
643 Fri May 30 19:21:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
645 * etc/Makefile.in was incorrectly installing mts.conf.in and
646 sendfiles.in -- fixed. Generated sendfiles script was not a
647 dependency of the `all' target, and was incorrectly included in
648 the distribution. Changed the suffix for the backed-up previous
649 versions of the etc files from the ambiguous .old to .prev. Added
650 call to diff -- only keep the .prev files around if different from
651 the newly-installed versions (intentionally didn't redirect output
652 to /dev/null so you'll notice when your changed versions are
653 getting moved aside).
655 * INSTALL never documented the etc/*.old thing. Documented the
656 new etc/*.prev thing (including a note to watch for diff output).
658 * Applied Alec Wolman <wolman@cs.washington.edu>'s dropsbr.c patch:
660 In the map_write routine, a call is made to map_open and this
661 call is supposed to set the "clear" variable to 0 or 1,
662 depending on whether the map file is empty or not. In
663 mh6.8.3, this worked because map_open would set "clear" by
664 calling the mbx_Xopen routine. In nmh, the code for mbx_Xopen
665 was merged into mbx_open, but the interface for mbx_open
666 doesn't support the clear variable, so that functionality was
667 lost. The map_open interface still contains "int *clear" in
668 the prototype, but never sets it.
670 My patch eliminates "clear" from the map_open interface (I
671 checked to make sure that map_write is the only client of
672 map_open). Furthermore, my patch also sets the "clear"
673 variable properly at the beginning of map_write by calling
674 fstat(). This eliminates the bug in that the value of "clear"
675 being used later in the routine was just stack garbage.
677 Having a bad value of clear causes this next bug to be
678 triggered: The fp file pointer was being opened with fdopen,
679 but in two of the three switch cases it wasn't being closed.
680 In certain cases, this was causing packf to run out of file
681 descriptors if you attempted to pack a large folder.
683 Mon May 29 7:48:15 2000 Shantonu Sen <ssen@mit.edu>
685 * Moved the date parsing routines from zotnet/tws to sbr/ (and
686 tws.h to h/). Updated all source files to reflect to new location
689 * Rewrote dparsetime (in dtimep.lex -> dtimep.c) to replace the
690 old zotnet/tws/dtimep.c, dtimep.lex, lexstring.c, lexedit.c, and
691 dtimep.c-lexed. It should now work with flex (although untested
692 with lex), and requires no sed-ing. For now, I have the lexed
693 version in the distribution, so that end-users don't need to worry
694 about running it through flex/lex. I have not added back support
695 for guessing the time zone when it's not specified.
697 Sun May 28 17:44:15 CEST 2000 Ruud de Rooij <ruud@ruud.org>
699 * Added autoconf check for getutent().
701 * Changed uip/rcvtty.c and uip/slocal.c to use getutent() and
702 friends. Since I can only check on Linux, please check if
703 this works on other systems.
705 Sun May 28 14:58:49 CEST 2000 Ruud de Rooij <ruud@ruud.org>
707 * Applied patch from Peter Maydell to uip/scansbr.c for more
708 checks for write failures.
710 * Unlink temporary file properly in uip/rcvtty.c.
712 * Moved viamail from bindir to libdir.
714 * Changed sendfiles into sendfiles.in, so that path to viamail
717 * Added gzip support to sendfiles.
719 * Added References header to replcomps and replgroupcomps.
721 Sun May 28 14:39:31 CEST 2000 Ruud de Rooij <ruud@ruud.org>
723 * Fixed m_getfld bug which caused segmentation faults when
724 incorporating messages which ended in multiple linefeeds crossing
727 Fri May 26 13:21:59 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
729 * msh has been unable to show MIME messages ever since 1.0. Alec
730 Wolman <wolman@cs.washington.edu> tracked down the problem to the
731 -show flag being passed to mhshow. mhshow is equivalent to the
732 old mhn -show, so we don't need the -show anymore. Removed it.
734 Fri May 12 02:51:21 2000 Shantonu Sen <ssen@mit.edu>
736 * zotnet/bboards is not longer built by default. Goal is to move
737 the assorted functions in zotnet into sbr or some more logical
740 * Moved zotnet/mf to sbr, and changed mf.h references accordingly,
741 as well as Makefiles.
743 Thu May 11 02:21:34 2000 Shantonu Sen <ssen@mit.edu>
745 * Simplified sbr/Makefile.in so that both SRCS and OBJS aren't
746 seperately and redundantly defined, but so that OBJS is a
747 pattern-substituted version of SRCS with suffix .c -> .o. This
748 should make maintainability easier.
750 * Added section to MACHINES indicating what platforms nmh is known
751 to compile and work on, just to give users peace of mind, or
752 something. This is by no means complete or exhaustive, so add
753 whatever you know works.
755 Tue May 09 20:38:04 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
757 * Alphabetized Shantonu's $pop_kinds output on configure's "pop is
758 enabled" line. If POP3 is the only kind of POP enabled, say so,
759 rather than just saying "yes" (which is ambiguous).
761 * Fixed four warnings in Shantonu's new getpass.c. Needed to
762 #include <stdlib.h> for calloc(), <unistd.h> for ttyname(), and
763 "h/mh.h" for adios(). Also changed ch from char to int to get rid
764 of "comparison is always 1 due to limited range of data type" on EOF.
766 * Added steps to README.developers saying to change the version
767 number to X.Y.Z+dev. Did a little rearranging and changed the FTP
768 dir from /home/ftp to /var/ftp to reflect Doug's new machine.
770 * Changed configure.in to use gcc -Wall even without
771 --enable-debug, to prevent developers compiling optimized from
772 introducing warnings, and to give end-users a warm, fuzzy feeling
773 as they (hopefully) see no warnings come out (except perhaps on
774 the lex output file) even with -Wall.
776 * Renamed getpass() to nmh_getpass() since the prototype for
777 getpass() varies from OS to OS, and we want to _always_ use our
778 version of the function. Fixed all the callers to use
779 nmh_getpass() and added it to prototypes.h. Semi-arbitrarily
780 upped MAX_PASSWORD_LEN from 128 to 256. buf was being calloc()'d
781 and the memory leaked -- should have just been declared as static
782 char array. Prepended "Portions of this code are" to the
783 copyright message, as this version has been changed significantly
784 from the BSD version.
786 * Added "nmh-local functions to use in preference to OS versions"
787 section to README.developers (currently just says to use
788 nmh_getpass() instead of system getpass()).
790 * Prepended "Portions of this code are" to the copyright message
793 * Added mts.conf.5 page per Neil W Rickert <rickert+nmh@cs.niu.edu>'s
796 This happens on solaris:
799 windex entry incorrect: mts.conf(5) not found.
800 No manual entry for mts.conf.
804 % echo ".so man5/mh-tailor.5" > mts.conf.5
806 done in the man5 directory. We need to add 'mts.conf.5' as a
807 reference sourcing mh-tailor.5.
809 Mon May 08 23:51:55 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
811 * Doug informed me that the way I had restored the "lost" version
812 histories was wrong, because `cvs checkout's of old versions of
813 nmh wouldn't work properly. It occurs to me that this could be
814 fixed by simply deleting those tags in the new-location *,v files,
815 but oh well. I'm putting everything back to the way Doug
816 originally had it. To get the old version history for a file that
817 used to be in the top directory, you'll need to "blindly" do a
818 `cvs log' there (even though you won't have a local copy of the
819 file in that directory). `cvs diff' will no longer be able to
820 diff pre-move versions vs. post-move versions -- you'll have to do
821 a lot of manual gyrations with `cvs checkout' and then use `diff'.
823 * I had alphabetized the --configure options in the --help output
824 awhile back, but Shantonu added --enable-apop just under
825 --enable-pop. Put it in alphabetical order and clarified what
826 --enable-apop does vs. --enable-pop and --with-krb4. Also changed
827 --with-mts help line from "mail transport agent" to "mail
828 transport agent/service" so the 's' in "mts" doesn't seem to come
831 * Added two steps to "releasing nmh" in README.developers. After
832 making the tarball, it's a good idea to diff the tree vs. the CVS
833 tree to make sure no files got left out, and then to chown the
834 files so that they're owned by root, preventing a Trojaning attack
835 by a malicious remote user with a UID matching yours.
837 * Changed DIFFERENCES to say that RPOP is not currently supported
838 rather than implying it by saying that APOP, KPOP, and POP[3] are.
840 Sun May 07 18:16:43 2000 Shantonu Sen <ssen@mit.edu>
842 * Imported NetBSD version of getpass() and made extensive
843 revisions for compatibility with programs that pipe the password
844 to stdin, such as exmh.
846 * Removed tests for system ruserpass() which sometimes gave
847 phantom positive results. Also, bext to use internal functions if
848 we ever want to change .netrc format to something else, or access
851 Sat May 06 08:28:09 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
853 * Restored lost version histories for those moved files by doing a
854 manual `mv' in the CVSROOT on mhost. CVS badly needs a `cvs mv'
855 command so that you can move files (without having physical access
856 to the CVSROOT) without losing versioning. Put MACHINES back at
857 the top level as it needs to be read before building. Fixed DIST
858 variable in {.,docs}/Makefile.in to reflect that and to add
859 missing entry for "INSTALL" file.
861 Sat May 06 13:13:07 2000 Doug Morris <doug@mhost.com>
863 * Re-cleaned up nmh documentation (by moving things to docs
864 subdir) and modified Makefile & configure.in to handle the change.
866 Mon Apr 17 21:28:40 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
868 * Scott Blachowicz pointed out that the configure --help output
869 for --enable-masquerade was misleading. Clarified.
871 Mon Apr 17 19:01:00 2000 Shantonu Sen <ssen@mit.edu>
873 * APOP support can be compiled in to inc and msgchk using
876 * To access an APOP host, specify -apop on the command line
877 along with any -host or -user option.
879 Fri Apr 14 23:10:44 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
881 * Upped the version number to 1.0.4+dev until the next nmh release.
883 * Added a "releasing nmh" section to README.developers, while the
884 process was fresh in my mind.
886 Fri Apr 14 18:21:34 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
888 * Added new files README.developers, ChangeLog_MH-3_to_MH-6.6, and
889 ChangeLog_MH-6.7.0_to_MH-6.8.4.html to DIST target in Makefile.in.
891 * Released nmh-1.0.4.
893 Tue Apr 11 21:37:03 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
895 * Applied Brian Campbell <bacam@tardis.ed.ac.uk>'s mhn.defaults.sh
898 It appears that there shouldn't be quotes around the %s in the
899 iso-8859-1 charset entry; xterm passes the remaining arguments
900 to the program, quoting them means that xterm thinks they're
901 part of the program's name.
903 This %s isn't the same as the "Insert content subtype" one from
904 mhshow-show-* -- it doesn't come from MIME headers and is safe not
907 Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
909 * added check in fmt_compile() to handle a single-character
910 format string. fmt_compile() depends on having an array of
911 format characters with an empty item at the end. A
912 single-character format would cause programs using this
913 function to segfault because the algorithm used to decide on
914 the length of the array mistakenly created a single-item array
915 when the format string was one character. This eventually
916 caused problems when the program attempted to test item+1
919 Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
921 * Richard Coleman threw out a lot of old MH-specific files in nmh.
922 Much of the stuff, indeed, is not worth saving, but there are
923 nuggets that are very worthwhile, and should probably be added
924 back in. Most important, IMHO, are the MH change logs, as they
925 can help answer questions like "Why is this code like this?" or
926 "How long has this been broken?" or "What was this ever used for?"
928 I've added a new file to the nmh tree called
929 ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
930 mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
931 to go from newest at the top to oldest at the bottom to match the
932 ChangeLog convention. Unfortunately there are no change logs for
933 versions of MH prior to 3 in the MH tar files available at
934 <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
935 are MH-6.6 changes that aren't documented in the logs.
937 I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
938 based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
939 and its "catman"-type output are a pain to deal with, but I was
940 loath to throw away the formatting, so I converted the file to
941 HTML. The only actual markup in the body are the "<B>" and "<U>"
942 tags, and "<" and ">" instead of '<' and '>', so it's quite
943 doable to view the file in plain ASCII mode as well. Note that
944 some of the changes this file documents as having been made in
945 MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
946 and later put in certain 6.8.4 stuff.
948 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
950 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
951 fixing apparent bugs in Dan Winship's new security quoting code:
953 Since upgrading, I've been getting the following errors
954 while attempting to process some MIME messages:
956 (1) Syntax error: Unterminated quoted string
961 (2) line 1/10 (END)Segmentation fault (core dumped)
963 (2) appears to be due to the testing of an unset pointer in
964 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
965 mis-quoting a filename being handed to the shell in
966 mhshowsbr.c:show_content_aux().
968 Resolving the pointer reference issue in
969 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
970 problem in the routine.
972 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
974 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
975 prevent core dumping on packf. Here's the note from his message:
977 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
978 core on a file w/o a From line with a line >= BUFSIZ.
979 I noticed this because I had a junk file in my mail
982 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
984 * wesley.craig@umich.edu did not document his previous KPOP patch,
985 so I did so, and asked him to check what I wrote. Unfortunately
986 he didn't notice my misunderstanding of his patch. I wrote that
987 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
988 exclusively, but if you leave it as "pop3", you can use Wesley's
989 new -kpop switch on a given invocation. Instead, however, -kpop
990 turned out to be necessary on every invocation, and a KPOP user
991 complained. Applied Wesley's new patch, which makes things work
992 like I thought his original patch did. After that, did one more
993 clarifying pass to the documentation in inc.man and msgchk.man.
995 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
997 * When I fixed the long-standing makedir() bugs in January, I had
998 the code call strtoul(..., 0), which I believed to be safe as all
999 modes specified as ASCII constants in the nmh code started with a
1000 leading zero (signifying octal), which I did as it would work if
1001 internal constants were ever changed to hex. Unfortunately I was
1002 unaware of the "Folder-Protect:" .mh_profile entry, which
1003 mh-profile.man documents as an octal-only constant, with no
1004 leading zero required. I've changed the strtoul() call to an
1005 atooi() call and removed the misleading leading zeroes on the
1006 ASCII octal constants in the code and man pages. Also changed the
1007 "Folder-Protect:" example in the man page to something more
1008 interesting than a duplication of the default.
1010 * When I added my --enable-masquerade option, you'll note that I
1011 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
1012 options too wordy and I'm not sure why Richard went that route.
1013 I've renamed them to just --enable-*, but the old versions will
1014 still work as well (they just aren't advertised).
1016 * Added a line to the "nmh configuration" output saying whether
1019 * Added a new README.developers file. From the file:
1021 This file is intended to provide a few tips for anyone doing
1022 development on nmh. Developers who learn things "the hard
1023 way" about the nmh codebase (as opposed to local info best
1024 encoded in a comment) are encouraged to share their wisdom
1027 Currently the topics are "autoconf files" and "directory structure".
1029 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1031 * Applied, after some finessing,
1032 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
1034 Here's a patch that allows you to add
1036 --with-smtpservers=<some.host.name>
1038 to the ./configure command line to set the "servers: " line in
1039 etc/mts.conf. Around here, we use "mailhost" so that all
1040 machines in the current domain just talk to a central machine
1041 and nothing else runs an MTA. Now, I can use
1043 --with-smtpservers=mailhost
1045 instead of having to remember to fix this by hand (and often
1046 forgetting to do so!).
1048 * Inspired by Simon's patch, added an --enable-masquerade option
1049 to configure. It will set the "masquerade:" line of mts.conf.
1050 You may specify a subset of the three types of masquerading, like
1051 --enable-masquerade="draft_from mmailid", or leave off explicit
1052 arguments to enable all three types.
1054 * Alphabetized the --enable and --with options in configure.in and
1055 INSTALL and added documentation of the two new options to the latter.
1057 * Added new dependency for mts.conf: Makefile. If this isn't
1058 done, then when you reconfigure nmh with new values for
1059 --enable-masquerade or --with-smtpservers, you'll fail to get an
1060 updated copy of mts.conf.
1062 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
1064 It seems that some MUA's didn't handle y2k very well - ELM
1065 seems to be one of them, and Ultrix's DXmail (based on MH!).
1066 I've got a few emails this month that look like:
1068 575 Jan 00 Xxxxxx Xxxx 3603 ...
1070 22+ Jan 00 Xxx Xxxxx 1771 ...
1072 The first has "15 Jan 100" as the date and the second has
1073 "19 Jan 00" as the date. The following works around this so
1074 that scan, show, sortm, etc work ok.
1076 I put Simon's patch under the control of a new #define called
1077 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
1078 acconfig.h about when you might not want to #define it.
1080 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
1081 lexed on Solaris 2.6. Added missing dependency in
1082 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
1084 * Added scan.MMDDYY and scan.YYYYMMDD format files.
1086 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1088 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
1090 With the patch below, you can add lines like:
1092 mhshow-suffix-application/msword: .doc
1093 mhshow-suffix-application/PostScript: .ps
1095 to the mhn.defaults file to append the given suffix to a
1096 scratch file. This allows applications which require a
1097 certain suffix to run properly.
1099 * Removed -force_html from lynx entry in mhn.defaults.sh (I
1100 believe older versions of lynx lack that option) and added
1101 "mhshow-suffix-text/html: .html".
1103 * Modified username_extension masquerading to only use the
1104 extended address on generated [Resent-]From: lines and SMTP
1105 envelope From:. With Neil's original implementation, nmh's global
1106 idea of the username was changed, which would result in inc lying
1107 and saying you had no new mail because it was looking for a
1108 mailbox called, for instance, "dan-nmh" (where username was "dan"
1109 and $USERNAME_EXTENSION was "-nmh").
1111 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
1113 There's a wrap-around problem that affects the implementation
1114 of Zeller's congruence in dtime.c. This causes the day-of-week
1115 calculations to fail for dates after Feb 29, 2000 (probably up
1116 until some year far in the future).
1118 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1120 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
1122 I finally tracked down the problem in msh that was causing
1123 errors whenever I tried to examine a 'mmdf' style mailbox.
1125 It turns out that not enough memory was being allocated with
1126 calloc(), causing memory pointers to be overwritten and
1129 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1131 * Changed the new "plussed_user" option to mts.conf's
1132 "masquerade:" to "username_extension" after getting feedback from
1133 qmail users, who use '-' as a separator rather than '+'. Removed
1134 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
1135 which needs to include the appropriate separator for your MTA
1136 ('-', '+', or whatever) as its first character.
1138 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1140 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
1142 * Added a note to DIFFERENCES stating that it's out-of-date
1143 (Richard was the last one to update it) and that we should
1144 consider only documenting incompatibilities with MH there.
1146 * Implemented (and documented) a third kind of username
1147 masquerading: "plussed user" masquerading. This one was suggested
1148 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
1149 "plussed user" feature, where mail sent to <user>+<string> will be
1150 delivered to <user>. When it's enabled, it's controlled by the
1151 $USERPLUS environment variable. How is it enabled? Well, that
1154 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
1155 changed it so that rather than being a boolean, it can be set to
1156 any combination of the three values "draft_from", "mmailid", and
1157 "plussed_user". Thus it is now possible to enable the three types
1158 of masquerading individually.
1160 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
1161 where if it was turned on, ','s would no longer be considered
1162 GECOS field delimiters.
1164 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1166 * Changed the GECOS-field '&' translation behavior to be
1167 controlled by the BSD42 #define rather than GCOS_HACK, since it's
1168 apparently always appropriate on OSes where BSD42 is #defined, and
1169 never appropriate on any other OSes. Thanks to Kimmo Suominen for
1170 responding to my "What is this code here for?" comment in mts.c
1171 and explaining the feature.
1173 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1175 * Upped the version number to 1.0.3+dev (ideally this should be
1176 done by whoever makes a release tar file, immediately after doing
1179 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
1180 patch, posted to comp.mail.mh, which he says prevents loss of mail
1181 when inc'ing into a full filesystem.
1183 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
1184 so that stamp-h.in will be different each time configure.in and
1185 related files are changed, making it easier to check it in (which
1186 is necessary to prevent unnecessary autoconf calls).
1188 * My declaration of initgroups() in slocal.c to eliminate the "no
1189 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
1190 use AC_EGREP_HEADER to see where initgroups() is declared, if
1193 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
1195 * Fix security hole in mhshowsbr.c which allowed untrusted shell
1196 code to be executed.
1198 * Released nmh 1.0.3.
1200 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1202 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
1203 be surrounded by single quotes, as a shell is not spawned when
1204 just saving files, and the filenames will end up with literal
1205 quotes embedded in them.
1207 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1209 * Whoever originally added the -help switch to all the commands
1210 got too cute and had the option itself print out as "-(help)" in
1211 the -help output. One theory is that they were making reference
1212 to the fact that clearly you know about the -help option since
1213 you're currently looking at its output. I think it's a bad idea
1214 to overload the meaning of the parentheses, however -- they're
1215 supposed to indicate what abbreviated prefix of the switch you're
1218 The other theory is that because you can say something like
1219 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
1220 by the same list of switches you get with -help, they were saying
1221 you can "sorta" abbreviate "-help" as "-". You don't get the
1222 "Usage:" string, though, so it's not really the same thing.
1224 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1226 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
1228 The following patch fixes a problem with requesting a
1229 service key for a machine that has multiple 'A' records. It
1230 also makes "-kpop" a command line option, for users who
1231 would like to use both "kpop" and "pop".
1233 Did no testing of the new features, as I don't have access to a
1236 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
1238 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
1240 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1242 * All %-escapes in mhn.defaults that actually expand to something
1243 should be surrounded by single quotes. Added quotes to the ones
1244 in mhn.defaults.sh that were missing them.
1246 * Added check for lynx to write mhshow-show-text/html line in
1249 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1251 * makedir() had multiple bugs dating back to MH. An octal
1252 constant was apparently being interpreted as decimal, resulting in
1253 directories with no user read or execute permissions, making
1254 nested directory creation fail. And there wasn't even an
1255 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
1256 in .mh_profile) on the outer directories of a nested directory.
1258 * A second `make install' would always fail because the check for
1259 whether mh_profile.5 existed was written incorrectly.
1261 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1263 * Added documentation on both types of masquerading to post's man
1266 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1268 * Doug's portability fix of my setgid inc autodetection had a
1269 caching bug -- if you re-ran configure, uip/Makefile would be
1270 corrupted, and installation would bomb out on OSes where inc needs
1273 * Implemented a new kind of email address masquerading. Usually,
1274 when a user writes a custom "From:" header in a draft, nmh uses it
1275 rather than generating one. However, the user's true address is
1276 used in the SMTP envelope "From:" and is revealed in the "Sender:"
1277 header. Now, when mmailid is set to non-zero, the envelope
1278 "From:" uses the address specified in the draft "From:" header,
1279 and there is no "Sender:" header. This is useful when sending on
1280 behalf of a remote POP3 account or when remote mail robots
1281 incorrectly use the envelope "From:" in preference to the body
1282 "From:". This processing has only been implemented for post, not
1283 for the undocumented spost (which was already missing some "From:"
1284 processing that post has).
1286 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1288 * Got rid of the rest of the gcc -Wall warnings that I didn't have
1289 time for on 1999-07-15 (and, it would seem, some new ones people
1290 introduced since then). The primary ones were the warnings that
1291 default prototypes were being used for [v]snprintf() and
1292 str[n]casecmp(). As of right now, there are _no_ compilation
1293 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
1296 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
1298 * Move mhtest from bindir to libdir.
1300 * Move sendfiles from libdir to bindir.
1302 * Updated sendfiles manpage to reflect this change.
1304 * Added documentation for -build and -file switches to repl and
1305 forw manpages (patch from Peter Maydell).
1307 * Fixed interaction between specifying -cc in profile and -group on
1310 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1312 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
1313 not unanimous support for my proposed even/odd release/developer
1314 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
1317 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1319 * Upped the version number to 1.0.3. If we don't do this, then
1320 when people report bugs against 1.0.2, we won't know "which" 1.0.2
1321 they're talking about (since the development source is publically
1322 available via CVS). I think the Linux kernel version numbers are
1323 a good model, so the next time we roll a tarball, it should be
1324 version 1.0.4 (or higher -- anyhow, an even-numbered version).
1326 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
1328 * Released nmh-1.0.2.
1330 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
1332 * Added check for whether "libtool" is in fact gnu libtool. If
1333 it is, it is not used. This is the wrong behavior. If vendor
1334 XYZ later on decides to create yet another libtool, we'll be
1335 caught again. This works for now.
1337 * Minor updates to MACHINES refering to Mac OS X.
1339 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
1341 * Added check for "libtool" (a ranlib type tool for Mac OS X)
1342 and modified Makefiles so that nmh will build under Mac OS X.
1344 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
1346 * Changed repl defaults to partly revert to MH behaviour,
1347 "-cc all" is now only implied with -group.
1349 * The replcomps template includes cc: header again (as in MH).
1351 * Updated repl man page to reflect these changes.
1353 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
1355 * Tweaked configure to handle Solaris and SunOS after the BIND
1356 changes. Both need more cleanup.
1358 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
1360 * Removed BIND define and replaced it with a check for
1361 gethostbyname (to determine if the host is DNS aware) and a
1362 check for sethostent. This appears to be the right thing to
1363 do, but there is no explanation of the reasoning behind the
1364 BIND define in the code and it appears to have been used for
1367 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
1369 * Updated manpages Makefile to link mh-profile.5 to
1370 mh_profile.5 after installation. Suggestion from Richard Cohen
1371 <richard@jubjub.demon.co.uk>.
1373 * Modified configure.in to check for _IO_write_ptr and libio.h
1374 to determine whether to define LINUX_STDIO instead of using
1377 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1379 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
1380 multiple machines in the past where the mail spool was a symlink
1381 to a directory on another device with more free space.
1383 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1385 * Fixed a portability problem in Doug's fix of a portability
1386 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
1388 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
1390 * Added config.sub and config.guess to the list of files to be
1393 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
1394 added if a list of addresses was split over several header lines.
1396 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
1397 macros, regardless of platform.
1399 * Allow q to quit mhshow, and n to skip to next part. Patch from
1400 Kimmo Suominen <kim@tac.nyc.ny.us>.
1402 * Modified mhstore to recognize attachments created by sendfiles
1403 with x-conversions=gzip.
1405 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
1407 * added explicit cast to long from time_t for tclock in
1410 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
1411 it's needed for ioctl() anyway. This prevents a warning about
1412 implicit definition of ioctl().
1414 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
1415 "User Configuration" section of config.h (moved @TOP@ in
1416 acconfig.h) so they're easier to find, should someone actually
1417 want to mess with them.
1419 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
1421 * updated Makefile.in so it recognized COMPLETION-TCSH and
1422 COMPLETION-ZSH (only used in make nmhdist).
1424 * added prototype for ruserpas to <h/prototypes.h>. Fixes
1425 warnings in mhparse.c and mhbuildsbr.c.
1427 * added include checks for <time.h> and <sys/time.h> to
1428 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
1429 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
1431 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
1432 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
1433 warnings about implicit definition of mts_init().
1435 * added <grps.h> to slocal.c to prevent warnings about
1436 function initgroups.
1438 * added <h/signals.h> to prevent warning about missing SIGNAL
1441 * added function prototypes to smtp.c, whatnowproc.c,
1442 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
1445 * explicitly declared mbx_style in mshcmds.c and lused in
1446 fmtdump.c as type static int instead of just static to
1449 * various code cleanups to prevent ambiguous statements
1450 (brackets for if/thens and parens for complicated if
1454 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
1456 * commented out _cleanup() in mf.c because it's the only
1457 location in all of the source code where it exists. It was
1458 preventing compilation on at least linux.
1460 * Added check for <db1/ndbm.h> which is the new location where
1461 linux systems appear to be stuffing this header file.
1463 Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
1465 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
1467 * added mh_profile SEGV patch from Richard Cohen
1468 <richard@jubjub.demon.co.uk> that prevents crashing when
1469 mh_profile doesn't end in a newline. A similar patch was
1470 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
1472 * fixed bug in associated with MAILGROUP #define (group "mail"
1473 is not universal) -- hard to believe, but true.
1475 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1477 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
1479 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1481 * Automated #define of MAILGROUP and installation of inc as setgid mail
1482 when the mail spool directory isn't world-writable.
1484 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1486 * slocal -debug used to leave a file in /tmp for each message
1487 processed. Very bad for folks with slocal -debug in their .forward!
1489 * Got rid of a ton of compilation warnings. Most were "junk"
1490 warnings due to the use of gcc -Wall (without -Wno-parentheses),
1491 but a few represented real bugs. There remain many warnings to be
1492 tackled that are due to missing function prototypes (e.g. snprintf()).
1494 * Default rcvdistcomps no longer puts a copy of all outgoing
1495 messages in outbox. Added an rcvdistcomps.outbox that does.
1497 Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
1499 * Updated configure to check for mkstemp (available on OpenBSD) and
1500 substitute it for mktemp if available.
1502 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
1504 * Added config.sub and config.guess and updated acconfig.h and
1505 configure.in to automatically detect system type and set the
1508 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
1510 * Released nmh-1.0.1.
1512 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
1514 * Fixed flist to properly deal with relative folder names.
1515 Problem noted by Jerry Peek <jpeek@jpeek.com>.
1517 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
1518 well as the Kerberos 5 compat libraries. Based on a patch from
1519 Assar Westerlund <assar@sics.se>.
1521 * Added a check in configure.in to test if modf is in libc and
1522 link with libm if not. This is needed by at least Digital UNIX.
1523 Problem pointed out by Kevin Oberman <oberman@es.net>.
1525 * Fix a bug from the "mhn -show" to "mhshow" renaming that
1526 made the "list" command in whatnow not work for some users.
1527 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
1529 * Replaced "extern int errno" with "#include <errno.h>" in a
1530 number of files. Suggested by Stephen Wilson Bailey
1533 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
1534 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
1536 * Fixed a segmentation fault in inc. Patch originally from Ruud de
1537 Rooij <r.c.m.derooij@twi.tudelft.nl>.
1539 * Allow display of 8bit encoded messages. From Kimmo Suominen
1540 <kim@tac.nyc.ny.us>.
1542 * Fixed repl to not add line breaks in the middle of long
1543 addresses when building a reply. From Ruud de Rooij
1544 <r.c.m.derooij@twi.tudelft.nl>.
1546 * Added -library switch to spost so it can parse user aliases like
1547 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
1549 * Changed configure.in's check for sigsetjmp to properly deal
1550 with systems like Linux where it is a macro. From
1551 <elleron@servtech.com>.
1553 * Fixed a bug in whatnow that could cause it to sometimes exit
1554 without prompting the user. Based on a patch by Richard Geiger
1557 * Added code to deal with SIGPIPE in mhl so it doesn't print
1558 "Broken pipe" if you quit out of the moreproc.
1560 * Documentation: Added a note to MACHINES about Irix make. Added a
1561 pointer to the online copy of the MH book in INSTALL. Added
1562 some additional information to the whatnow and packf man pages,
1563 suggested by Jerry Peek <jpeek@jpeek.com>.
1565 * Updated INSTALL, FAQ, etc to not refer to Richard as the
1566 maintainer or math.gatech.edu as the home any more.
1568 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
1572 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
1573 mbx_open so that the mode of zero length maildrops
1574 would not be changed.
1576 * Replaced the substitute version of snprintf() with the
1577 one from the Apache web server.
1579 * Changed to default mode for creating new messages to 0600
1580 (this should have been done a long time ago).
1582 * Changed "flist" to handle searching for multiple sequences
1583 for each folder. Also flist will now correctly split
1584 Unseen-Sequence if it consists of multiple sequences.
1586 * Added new switches `-unlink' and `-nounlink' to "refile".
1588 * Added new switches `-unlink' and `-nounlink' to "rmm".
1590 * More cleanups of slocal output. Changed adorn() to
1591 send to stdout, instead of stderr (to match rest of
1594 * Merged mbx_create() into mbx_open, so that creating and
1595 opening a nonexistent maildrop is done atomically. This
1596 removes a bad race condition.
1598 * Fixed bug that caused slocal to be unable to save to MMDF
1601 * Added new wrapper function usr_folder() to slocal.c to
1602 handle adding message to folder (currently, it still uses
1603 usr_pipe() to call rcvstore).
1605 * seq_list() checks for empty folder before scanning for
1606 sequence information.
1608 * num_digits() in flist.c and folder.c now returns correct
1609 value for 0. Also added sanity check.
1611 * folder_delmsgs() now correctly decrements internal message
1614 * Don't attempt to read sequence information if folder
1617 * Split seq_read into seq_public and seq_private.
1619 * Small change to sigmsg.awk, since newer versions of gawk
1620 interpret 034 as octal.
1622 * In flist, don't scan for sequence information in empty folder.
1624 * Updated mhn.defaults.sh to output profile entries for mhshow,
1625 mhstore, and mhbuild.
1627 * Changed configuration parameter "mhn-access-ftp" to
1628 "nmh-access-ftp". Updated man pages
1630 * Moved the code in InitMultipart to reverse the order of the
1631 parts in a multipart, into its own function "reverse_parts()".
1633 * Changed code in mhbuildsbr.c to store unencoded content
1634 in the c_cefile structure when building.
1636 * Changed code in mhoutsbr.c to look for unencoded content
1637 in the c_cefile structure when outputing message.
1639 * Changed configuration parameter "mhn-cache" and
1640 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
1641 since it is used in mhstore, mhlist, and mhshow. Updated man pages
1643 * Change configuration parameter "mhn-storage" to
1644 "nmh-storage", since it is now used in mhstore, mhlist,
1645 and mhshow. Updated man pages
1647 * Add autoconf support for KPOP (kerberized pop).
1649 * Add autoconf support for Hesiod.
1651 * Split routines to output a message given a Content structure
1652 (output_message, output_content, write7Bit, etc..) to a new
1655 * Split output_content(), into output_content() and build_headers().
1657 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
1658 list of header fields, rather than reopening the message.
1660 * Added free_header() to mhfree.c to free structures containing
1661 header field information.
1663 * Changed get_content() to use the linked list of header fields
1664 when parsing the various MIME headers (Content-XXX).
1666 * Changed get_content() to store linked list of header field
1667 values when parsing a content.
1669 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
1670 routines in mhcachesbr.c to handle the content cache.
1672 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
1673 cache_content) into new file mhcachesbr.c.
1675 * More calls to sprintf/strcpy (primarily in mhparse.c
1676 and mhbuildsbr.c) converted to snprintf/strncpy.
1678 * When a message is displayed with `mhshow', it is now
1679 removed from the "unseen" sequence.
1681 * Change the default "showmimeproc" to "mhshow".
1683 * Split "mhn -show" off into separate command "mhshow".
1685 * Split "mhn -store" off into separate command "mhstore".
1687 * Split "mhn -list" off into separate command "mhlist".
1689 * Add sanity checks to context_find(), context_replace(),
1690 and context_del(), to abort if context file hasn't been
1693 * Add calls to context_read(), to the beginning of all nmh
1694 commands (instead of being called indirectly by context_find).
1696 * Changes the "substitute" version of vsnprintf/snprintf for
1697 operating systems without native versions, to just call the
1698 native vsprintf(), and ignore the buffer length. This is
1699 faster, but less secure than the previous version that used
1700 temporary files. This should only be a problem for systems
1701 which do not have a native snprintf(), and require `inc' to
1704 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
1706 * Changes client() routine to take additional parameter, which is
1707 the buffer length of the parameter "response". Then added
1708 buffer length checks for this parameter.
1710 * Changed getws() to get_fields(), since that is apparently the
1711 name of a wide character version of gets() on some archetitures.
1713 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
1715 * Change the code in most of the commands that take multiple
1716 message names/sequences/ranges on the command, such that
1717 the msgs array is expanded dynamically. This removes most
1718 of the limits on the length of command lines.
1720 * Add additional parameter to copyip(), to specify the
1721 maximum number of strings that can be copied (security
1724 * Create new function getarguments(), to massage the argument
1725 vector before parsing it (add any arguments from your
1726 profile to the beginning of the argument vector). This
1727 also removed the general limit on the number of command line
1730 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
1732 * Released nmh-0.27.
1734 * Added a new command "delete", that is available during
1735 a "whatnow" session. It is equivalent to "quit -delete".
1737 * Added another parameter to editfile (in whatnowsbr.c),
1738 that controls whether editfile should remember the last
1739 program that was exec'ed. This way the whatnow command
1740 "mime", will not be re-executed if "edit" is later given
1743 * Changed whatnowsbr.c, so that whatnow doesn't abort if
1744 mhbuild returns an error.
1746 * Added parameter to sendsbr(), so you may specify whether to
1747 rename the draft file.
1749 * Pass delay time to splitmsg() as a parameter, rather than
1750 use a global variable.
1752 * Moved code to rename draft file after sending message from
1753 splitmsg and sendaux, to sendsbr.
1755 * Removed all the code in viamail to split messages and then
1756 mail them. Replaced this with the standard sendsbr.c routines.
1758 * Changed sendsbr(), so that when splitting messages into
1759 messages of type "message/partial", the header fields that
1760 are copied are more compliant with RFC-2046.
1762 * Fixed mhbuild to track temporary files better. They are
1763 now correctly removed when mhbuild aborts.
1765 * Created a new man page for "sendfiles". The information
1766 about "mhn -viamail" in the "mhn" man page was moved to
1769 * Changed the name of the "viamail" shell script to
1770 "sendfiles". Modified "sendfiles" to use the new
1773 * Moved the functionality for "mhn -viamail" out of mhn,
1774 and into a separate executable called "viamail".
1776 * When storing MIME contents to a folder using mhn -store,
1777 they are now accumulated in a temporary file, and then added
1778 to the folder using folder_addmsg().
1780 * Moved code to save content to a folder from store_content
1781 to new function output_content_folder.
1783 * Moved code to save content to file from store_content to
1784 new function output_content_file.
1786 * Moved code to parse storage format string from store_content
1787 to new function parse_format_string.
1789 * Fix copy_some_headers() in mhstoresbr.c, so that the
1790 correct header fields in the first enclosing message/partial
1791 will be copied (according to RFC2046), when using mhn -store
1792 to reassemble messages of type message/partial.
1794 * Fixed bug to openFTP() in mhparse.c, that caused the
1795 tmp file to not be removed, when transferring a
1796 message/external file from ftp.
1798 * Moved the code in mhparse.c to process -auto switch (scan
1799 contents for the attribute "name"), to a new function
1800 "get_storeproc" in mhstoresbr.c.
1802 * Moved routines to free data structures related to MIME
1803 content from mhparse.c and mhbuildsbr.c, to new file
1806 * Moved code to show/display MIME content into new
1809 * Moved code to store MIME content from into
1810 new file mhstoresbr.c
1812 * Moved code to parse MIME content into new
1815 * Moved code to list information about MIME content
1816 into new file mhlistsbr.c.
1818 * Move part_ok(), type_ok(), content_error(), flush_errors(),
1819 and set_endian() to new file mhmisc.c.
1821 * Start to isolate the code to show, list, and store MIME
1822 messages. One side effect is that only one flag (-show,
1823 -list, or -store) can be used at a time now.
1825 * mhn -store -auto wasn't storing file in correct directory.
1827 * Removed a few dead variables from sbr/ruserpass.c
1829 * move code for creating tmp files, and renaming the
1830 the composition draft in mhbuild, from build_mime()
1833 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
1834 the -[no]auto switch (which isn't used in mhbuild).
1836 * split mhn.c into mhn.c and mhnsbr.c (name later changed
1839 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
1841 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
1843 * Released nmh-0.26.
1845 * Added (unlisted) options [no]dashstuffing to send, post,
1846 and whatnow to determine whether to do RFC934 quoting
1847 (dashstuffing) for encapsulated BCC messages. The default
1848 is still the same (dashstuffing).
1850 * Changed the undocumented feature "nodashmunging" in forw
1851 and mhl, into the documented feature "nodashstuffing". The
1852 default for forw, is still "dashstuffing" for backward
1853 compatibility, although I don't believe that bursting
1854 RFC934 digests is very common anymore.
1856 * Added an option to define REALLYDUMB in the default config.h.
1857 But it is not on by default.
1859 * moved creation of config file mts.conf from zotnet/mts
1860 to etc. This simplified the Makefile in zotnet/mts.
1862 * simplified directory support/general to etc.
1864 * removed unneeded directory support/bboards.
1866 * split getusername() into getusername() and getuserinfo().
1868 * Changed getusr() routine to getusername().
1870 * Slight cleanup in folder_pack.c on code that records the new
1871 number of the "cur" message when packing.
1873 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
1875 * Released nmh-0.25.
1877 * Change install process, so that hard linking the correct mts
1878 library to libmts.a, is not necessary. The final link process
1879 uses the original name of the library.
1881 * Fixed bug in flist.c and folder.c, so that symbolic links which
1882 point to directories, will not decrement the number of directory
1885 * Split the function list_content (in mhn.c and mhbuild.c) into
1886 list_content and list_debug.
1888 * Don't pack (folder -pack) an empty folder.
1890 * Exit gracefully in flist.c, if no sequence is specified,
1891 and no "Unseen-Sequence" is given in nmh profile.
1893 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
1895 * Released nmh-0.24.
1897 * Small clarification to the man page for `ali'.
1899 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
1900 are given, that order doesn't matter.
1902 * Fix bug in seq_list.c when realloc'ing for
1903 large sequence line.
1905 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
1907 * Released nmh-0.23.
1909 * Add new section on "Transfer Encodings" to man page for mhbuild.
1911 * In mhbuild.c, split compose_content into compose_content
1912 (parse and execute composition string), and scan_content (scan
1913 content, decided transfer encoding, check for clash with boundary
1914 string). I did a good amount of rearranging of this code.
1916 * Moved definitions for data structures for parsing MIME
1917 messages from mhn.c and mhbuild.c to a new include
1920 * Small amount of rearranging in sendsbr.c
1922 * Small changes to MAIL.FILTERING file.
1924 * Add the file MAIL.FILTERING to nmh distribution.
1926 * Add line to packf so that if message begins with
1927 "X-Envelope-From:" field, it is converted to "From ".
1929 * Fix packf to add "From " line to beginning of message,
1930 even if Return-Path doesn't exist.
1932 * Add note to MACHINES file that on Linux, configure
1933 doesn't find the functions sigsetjmp/siglongjmp.
1935 * Fix configuration for machines that don't have (or find)
1936 sigsetjmp/siglongjmp.
1938 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
1940 * Released nmh-0.22.
1942 * Add a configure check for sigsetjmp. Add some conditional
1943 #define's in h/signals.h in case it's not found.
1945 * Added additional notes about -auto switch in mhn man page.
1947 * Added note about MM_CHARSET environment variable to
1948 mh-profile(5) man page.
1950 * Fix signal problem in mhn.c (change setjmp/longjmp to
1951 sigsetjmp/siglongjmp).
1953 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
1955 * Released nmh-0.22-pre1.
1957 * Changed the first line in mhl.format from
1958 " -- using template mhl.format -- " to a blank line.
1960 * Added note about automimeproc to mh-profile man page.
1962 * Reorganize the main entry point for parsing a MIME message
1963 or file in mhn. Add new function parse_file() as new main
1964 entry point for parsing MIME files.
1966 * Add note to mhn man page, that "mhn -file -" will accept the
1967 source message on the standard input.
1969 * Changed a sanity check in folder_realloc that was too strict.
1971 * -norfc934mode is now the default for mhbuild,
1972 rather than -rfc934mode.
1974 * Fix mhbuild, so that Content-Description and RFC-822 comments
1975 from #forw directive will be correctly included if there is
1978 * Change mhn to correctly default parts of multipart/digest to
1979 message/rfc822 (leftover code from rfc934mode was removed).
1981 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1984 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1986 * Released nmh-0.21.
1988 * If the file given to mhbuild is "-", then accept the draft on
1989 standard input, and output the MIME message to standard output.
1991 * Cleaned up code in mhbuild.c that decides what transfer
1994 * Cleaned up code in mhbuild.c that decides what character set
1995 to use for text contents.
1997 * Removed old hpux specific code from zotnet/tws/lexstring.c
1999 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
2001 * Released nmh-0.21-pre2.
2003 * Added the "decode" variable to mhl.format and mhl.header.
2005 * Added new variable "decode" to mhlsbr.c to decode text in
2006 header fields as per RFC-2047.
2008 * Make sure that when decoding RFC-2047 header fields, that any
2009 spaces at the ends of the encoded text are not ignored, but the
2010 spaces between encoded word are.
2012 * Removed #ifdef's for MIME. MIME support is always compiled in.
2014 * scan/inc will now decode both Subject and From lines as
2015 RFC-2047 encoded header fields.
2017 * Added new function write_charset_8bit() to sbr. It returns
2018 the character set to use for 8bit text in composition draft.
2019 Changed mhbuild to use this function.
2021 * Split mhn man page into man pages for mhn and mhbuild.
2023 * mhn -show will only now only use default method for content
2024 of type plain, if it is NOT a part of a multipart/alternative.
2026 * Split mhn -build into mhbuild. Did some code cleanup.
2028 * Added support for %(decode) to fmtdump.c.
2030 * check_charset() now accepts US-ASCII as a subset of any
2031 ISO-8859-X character set.
2033 * Changed the default "showproc" to mhl, instead of the
2036 * When reading file into mhn composition file, only need read
2037 permissions, not write permissions.
2039 * Added own version of strcasecmp to distribution, since
2040 nmh calls it frequently with NULL pointers (ughh).
2042 * Replaced uleq.c with strcasecmp. Removed uleq.c from
2045 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
2047 * Released nmh-0.21-pre1.
2049 * If a message is missing charset parameter to text/plain, show
2050 will assume US-ASCII, rather than just calling showmimeproc.
2052 * Change show.c and mshcmds.c to use check_charset to see if text
2053 message contains valid character set.
2055 * Added new scan format file "scan.nomime" to support/general
2056 that doesn't do any RFC-2047 decoding.
2058 * Modified all the scan format files in support/general to do
2059 RFC-2047 decoding of Subject field.
2061 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
2062 ignore whitespace between two valid encoded words, but not
2063 between an encoded word and normal text.
2065 * Created new file sbr/check_charset.c. Moved code from
2066 fmt_rfc2047.c to check for valid character set to this file.
2068 * Added format escape %(decode) to decode contents of "str" register
2069 as a RFC-2047 header field.
2071 * The command install-mh now recognizes the switches -version
2074 * Added a new argument to print_help.c to decide whether to
2075 print profile entries (needed for install-mh to prevent weird
2078 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
2079 is initialize to max (mp->lowmsg, 1) rather than always 1.
2081 * Changed macros for sequence/attribute manipulation so that
2082 message status array doesn't need to always start at 1.
2084 * Small cleanups in folder_realloc().
2086 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
2088 * Released nmh-0.20.
2090 * Added configure option --with-pager=PAGER.
2092 * Added configure option --with-editor=EDITOR.
2094 * Changed the default format file for mhl (mhl.format) to
2095 also ignore (not display) the header fields Content-Type,
2096 Content-Transfer-Encoding, and Content-ID
2098 * Fixed core dump in addrsbr.c when using %(proper) format function
2099 and the To: line was missing.
2101 * Added the file ZSH.COMPLETION to the distribution.
2103 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
2105 * Released nmh-0.20-pre2.
2107 * Added new switch -snoop to both `msgchk' and `inc', so you can
2108 watch the POP transaction.
2110 * Changed "replgroupcomps" to check for Mail-Followup-To header
2111 first, and use it if available.
2113 * Changed "replcomps" to check for Mail-Reply-To header
2114 first, and use it if available.
2116 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
2118 * Released nmh-0.20-pre1.
2120 * Changed seq_list.c to dynamically enlarge the buffer for
2121 collecting the message ranges in a long sequence line.
2122 This should remove the last hard limit on the size of a
2125 * Changed seq_read.c so that can read long sequence lines.
2126 It will use multiple calls to m_getfld() when m_getfld()
2127 returns the state FLDPLUS.
2129 * Changed brkstring.c to dynamically add more space for pointers
2130 if necessary. This is needed when splitting up large sequence
2133 * Did some small cleanups in seq_save.c.
2135 * Added new switches `-[no]unseen' to rcvstore, to control
2136 whether new messages are added to Unseen-Sequence.
2138 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
2140 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
2141 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
2143 * Changed "replcomps" to not include CC and TO lines so that
2144 that reply message is only directed at the author of the
2145 message to which you are replying.
2147 * Added new switch `-group' to command repl, which causes repl
2148 to use new forms file "replgroupcomps". This is intended for
2149 making group replies.
2151 * Removed #ifdef for ATHENA.
2153 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
2155 * Released nmh-0.19.
2157 * Fix repl,forw so that switch `-form file' will not abort
2158 as ambiguious (silly mistake on my part).
2160 * Cleaned up the mhn man page. Added info about a few escapes
2161 for the formatting/display strings that were not documented
2162 (%%, %t). Moved the BNF grammar for the mime composition file,
2163 to the end of the man page.
2165 * Added the options -[no]format to the command repl. The
2166 switch `-format' will filter the message to which you are
2167 replying with the standard message filter "mhl.reply", which
2168 is now included in the distribution. The `-noformat' option
2169 will negate the use of -format or -filter and not include
2170 the message to which you are replying in the draft.
2172 * Did some cleaning and reorganization on many of the man
2175 * Added debugging switch `-debug' to mhparam, which displays
2176 the values of all `procs' (and some other misc configuration
2177 info) that nmh keeps in global variables.
2179 * When using `refile -preserve', if a conflict occurs, then use
2180 the next available number above the message number you wish
2183 * In forw.c, split the code for creating MIME style forwarding
2184 out of copy_draft, and into copy_mime_draft.
2186 * Move routines in mark.c to print sequences, into new
2187 file sbr/seq_print.c
2189 * flist will now update the current folder.
2191 * Added the switches -[no]fast to flist, to replace
2192 -[no]total. The previous switches are still accepted
2193 but now undocumented.
2195 * More reorganization in flist of the code for
2198 * The command "flist +foo -all" will now scan the folder
2199 "foo" and all its 1st level children.
2201 * Add missing include file <h/mh.h> to sbr/snprintf.c
2203 * Fix alarm bug in rcvtty, so that when it calls external
2204 process, the alarm is never longer than 30 minutes.
2206 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
2208 * Released nmh-0.18.
2210 * Fixed bug in mark, so that "mark -list -seq foo" will
2211 correctly indicate if "foo" is a private sequence. I found
2212 this bug mentioned in Jerry Peek's book.
2214 * Simplified the code in seq_setcur(), since seq_addmsg() now
2215 retains the public/private status of sequences.
2217 * Changed sequence handling so that if the switches -public
2218 or -nopublic, are not specified for the commands mark, pick,
2219 or rcvstore, then existing sequences will retain their
2220 previous public/private status.
2222 * mhparam now handles the mh-sequences profile entry
2225 * flist -all will now also check readonly folders (for
2228 * Improve the leaf optimization for folder command.
2229 It will now track the number of directories in a folder,
2230 and stop stat'ing files once it has hit all the subfolders.
2232 * Renamed m_getfolder to getfolder. Changed getfolder to
2233 take option to determine whether it should get current
2234 folder, or just default folder (Inbox). Changed rcvstore,
2235 inc, and rmf to use the new getfolder.
2237 * flist now indicates if a sequence is private.
2239 * Change WUNTRACED to 0, in pidwait.c, so that commands will
2240 wait for stopped processes.
2242 * conflict will dynamically allocate space for group names,
2243 so it can now handle system with more than 100 groups.
2245 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
2247 * Released nmh-0.18-pre4.
2249 * Check if we have enough message status space, before we
2250 call folder_realloc() in burst, mhpath, and m_draft().
2252 * mhn will now correctly identify a formatting string of "-"
2253 for the option -store, and send content to stdout.
2255 * Change the way that memory for message status is
2256 allocated. It is dynamcially allocated separately from
2257 the folder/message structure. This required changing
2258 folder_read.c, folder_realloc.c, folder_free.c.
2260 * Removed all the MTR code (experimental code for message
2263 * Renamed m_readfolder.c to folder_read.c and simplified
2266 * Renamed m_freefolder.c to folder_free.c.
2268 * Add function trim() to slocal.c to pretty print
2269 the debugging output.
2271 * Changed the name of m_packfolder() to folder_pack().
2272 Changed the name of m_remsg() to folder_realloc().
2274 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
2276 * Released nmh-0.18-pre3.
2278 * Changed installation to add `flists' which is hard linked
2279 to `flist'. This is a equivalent to `flist -all'.
2281 * For flist, -showzero is on by default.
2283 * Major changes to flist. Default is now for flist to search
2284 current folder. The switch `-all' is now used to specify
2285 searching all top level folders. The new switch `-showzero'
2286 is used to print out folders that don't contain any messages
2287 in the given sequence.
2289 * Split BuildFolderList in flist.c into 2 functions
2290 (BuildFolderList, BuildFolderListR). Changed these functions
2291 so that flist now does better leaf optimization, and will stop
2292 stat'ing directory entries when it knows it has hit all the
2293 subdirectories of a given directory.
2295 * Reorganized code in folder.c, so that all relevant folders
2296 are scanned first and information recorded. Then all the
2297 folder summaries at printed out at one time.
2299 * Made the options of folder(s) more orthogonal. Now
2300 "folder -all -noheader -nototal" will do the right thing.
2302 * Added `-noall' switch to folder, for completeness.
2304 * Changed the default mode for creation of new folders
2307 * Slightly changed the format for flist. It now indicates
2308 if a folder is current. Also the width of the various
2309 fields are now calculated at runtime.
2311 * Changed the format for folder(s). Folder names
2312 are now left justified. The width of the various fields
2313 are calculated at runtime.
2315 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
2317 * Released nmh-0.18-pre2.
2319 * Add paragraph to man page for install-mh and to INSTALL file
2320 about checking for global mh.profile.
2322 * Renamed m_find() to context_find().
2323 Renamed m_replace() to context_replace().
2324 Renamed m_delete() to context_del().
2325 Renamed m_update() to context_save().
2326 Renamed m_getdefs() to context_read().
2327 Renamed m_foil() to context_foil().
2329 * Change rcvstore to use routine folder_addmsg(), instead of
2330 adding message to folder itself.
2332 * Changed refile, so that if the switch -preserve is used,
2333 and a conflict occurs for a particular folder, then folder_addmsg()
2334 will just use next highest available number for that folder,
2337 * Make folder_addmsg() more robust. It will make repeated
2338 attempts to link file into folder if link returns with
2341 * Fix bug, so that that if forking sendmail, HELO will be sent
2342 unless clientname: option is defined but empty (so now it
2343 is the same as the direct smtp code).
2345 * Changed sprintb to snprintb (now we pass the buffer length
2346 to new routine). Changed code to use new function.
2348 * Added snprintf to sbr. Added configure check to build it
2349 if you don't have a native version (but haven't changed much
2350 code to use it yet).
2352 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
2354 * Released nmh-0.18-pre1.
2356 * Fixed alarm bug in slocal, so that alarm is never
2357 called with a value larger than 30 mintues.
2359 * Fixed race condition in rmm and refile, so that
2360 context is updated before external rmmproc is called.
2362 * Removed all the OVERHEAD code.
2364 * Move code to add message to folder from refile.c
2367 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
2369 * Did some rearranging of the internals of inc.c.
2371 * Make -inplace the default for anno, forw, dist, and repl.
2373 * Changed --enable-smtp to --with-mts={smtp,sendmail}
2375 * Created new directory mts/sendmail for direct sendmail
2376 interface (although it currently still uses SMTP).
2378 * Removed all the TMA (trusted mail agent) code
2380 * Removed all the TTYD (terminal access daemon) code
2382 * Removed all the MF (uucp filtering) code.
2384 * Removed all the code for BERK.
2386 * Removed all the code for stand-alone delivery (MHMTS).
2388 * Split the file mts/sendmail/smail.c into sendmail.c and
2389 smtp.c. Changed the name of the directory to mts/smtp.
2391 * Changed autoconf to use @sysconfdir@ for location of
2392 configuration files.
2394 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
2396 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
2398 * Released nmh-0.17.
2400 * MAKEDEFS weren't passed down to recursive makes correctly.
2402 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
2403 of hard-coding "/etc/utmp".
2405 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
2408 * Remove configure checks for ulong and ushort. Changed
2409 code to just use unsigned {short, long}.
2411 * Change addmsg function in refile.c to return new
2412 number of refiled message.
2414 * Added check in get_returnpath for empty unixbuf.
2416 * Cleanup of sbr/pidstatus to use more POSIX macros
2417 for return value of wait().
2419 * Change configure to also check /bin for "more".
2421 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
2423 * Released nmh-0.16.
2425 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
2427 * Added automimeproc, which should replace automhnproc.
2429 * multipart messages will no longer abort for messages
2430 of type 8bit or binary (although we still can't really
2431 deal with binary messages, yet).
2433 * Fix double free of c_storage. From John MacMillan.
2435 * mhn now treats unknown subtypes of "text" as text/plain.
2437 * mhn changed so that specifying mhn-show-multipart, or
2438 mhn-show-multipart/{mixed, alternate, etc...) will override
2439 the use of the internal method for displaying these types.
2440 Previously mhn would always use the internal method for subtypes
2441 mixed, alternate, digest, and parallel (even if an alternate
2442 method was specified in mhn.defaults).
2444 * mhn show treats unknown subtypes of multipart, as type
2445 multipart/mixed (as specified RFC2046).
2447 * mhn checks for the parameter "name" rather than "x-name".
2448 From MH-6.8.4 patch.
2450 * Fix double free of ctinfo in user_content when using
2451 #forw with single message. From John MacMillan (and
2454 * Changed -mhnproc switch for show, to -showmimeproc.
2456 * Changed profile entry "mhnproc" to "showmimeproc".
2458 * Added "mime" option to "whatnow", which calls the program
2459 "buildmimeproc" (default is mhn -build) to process MIME
2462 * Added -build switch to mhn, to process MIME composition
2465 * Did some reorganizing of mhn.c.
2467 * Changed casting in mts/sendmail/smail.c from (char) to
2468 (signed char) so SMTP reply codes work correctly for machines
2469 which used unsigned chars by default.
2471 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
2473 * Released nmh-0.15.
2475 * Added new form "scan.unseen" to distribution. It marks messages
2476 which are in any sequence in Unseen-Sequence.
2478 * Do some rearranging of date/time code in zotnet/tws/dtime.c
2480 * Fix sign extension bugs in fmt_scan.c.
2482 * Fix m_atoi.c so that strings ending in non-digit characters
2485 * Split code in burst.c so that finding delimiters of digested
2486 messages and bursting a message into multiple messages are
2487 two separate functions (find_delim and burst).
2489 * Add workaround fo AC_PATH_PROG in configure.in, so
2490 that BSD4.4 machines can find sendmail, vi, more.
2492 * Added "-width" option to rcvtty.
2494 * Change a few variable names in zotnet/mts/client.c since
2495 they conflict with defines on AIX.
2497 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
2498 unsuccessful if resulting file is less than 500 lines long
2499 (rather than 10, which was previous value), since AIX
2500 sed gives mangled file of about 200 lines.
2502 * Extract code in rcvstore.c to link message into folder,
2503 and put in own subroutine.
2505 * Extract code in refile.c to link message into folder,
2506 and put in own subroutine.
2508 * Moved code to remove messages from folder into own
2509 routine "folder_delmsgs" in sbr. Changed rmm.c and
2510 refile.c to use new routine.
2512 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
2514 * Renamed m_seqok to seq_nameok.
2516 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
2519 * Changed m_seqflag to return the number of a sequence rather
2520 than its bit flag. Changed its name to seq_getnum and renamed
2521 file to sbr/seq_getnum.c.
2523 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
2526 * Added zero switch to m_seqadd function to zero out bits before
2527 adding message to sequence.
2529 * Renamed function m_setvis to m_setunseen, and renamed
2530 corresponding file in sbr.
2532 * Renamed function m_setseq to m_setprev, and renamed corresponding
2535 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
2537 * Added new function m_seqdelsel to m_seqdel.c, which deletes
2538 all selected messages from a sequence.
2540 * Added new function m_seqaddsel to m_seqadd.c, which adds all
2541 selected messages to a sequence.
2543 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
2546 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
2548 * Renamed function pack_folder to m_packfolder, and moved it
2549 from uip/folder.c into its own file sbr/m_packfolder.c
2551 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
2553 * Changed function m_gmsg to m_readfolder. Renamed file
2554 sbr/m_gmsg.c to sbr/m_readfolder.c.
2556 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
2558 * Expanded rcvtty man page, and added small patch from
2559 MH-6.8.4 distribution.
2561 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
2563 * Released nmh-0.14.
2565 * Comment out configure test and code for tgetent to allocate its
2566 own termcap buffer when passed a NULL argument.
2568 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
2570 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
2571 to show. Restructured code to handle options to various
2572 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
2573 environment variable.
2575 * Added new man page `mh-draft' which documents the
2576 draft folder facility in nmh.
2578 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
2581 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
2582 fmtcompile.c to fmt_compile.c, and formataddr.c to
2585 * `send -help' wasn't showing the -(no)mime and -split
2588 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
2590 * Released nmh-0.13.
2592 * Changed mhpath so it doesn't abort if a message sequence
2593 such as "mhpath all" expands to more than 1000 messages.
2594 Also mhpath now dynamically reallocated space for message
2595 names (The number of command line arguments is still limited
2598 * Did some general restructuring of the code in folder.c
2599 that checks for folder information, and prints it.
2601 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
2603 * Changed `folder' to reallocate space for folder names if
2604 necessary. So `folders' can now handle more than 300 folders.
2606 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
2608 * Change configure to use a compile check to see if the tm struct
2609 has tm_gmtoff, rather than using egrep.
2611 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
2613 * Released nmh-0.12.
2615 * Had set_exists and unset_exists macros backwards.
2617 * Released nmh-0.11.
2619 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
2621 * Added documentation to mh-profile.man about the various
2622 `procs' (mhlproc, showproc, lproc, etc...).
2624 * Replace the bit twiddling for SELECTED, UNSEEN, and
2625 mp->attrstats with macros.
2627 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
2630 * Change fstat to stat in m_gmsg.c since Linux wants
2633 * Merge Linux patch sent in by Michel Oosterhof (original
2634 patch from bsa@kf8nh.wariat.org).
2636 * Document an undocumented MH feature. mhn -form mhl.null
2637 will suppress the display of the message header.
2639 * mhparam will now return "mhparam etcdir".
2641 * Add catproc to /config/config.c and use that in show.c
2642 and mshcmds.c, rather than hard coding in /bin/cat.
2644 * Add mhnproc to the list of `procs' in mh-profile.man.
2646 * Add configure test for lorder and tsort commands.
2648 * Commented out the padding in the `msgs` struct in h/mh.h
2650 * Change m_gmsg.c to allocate elements to the `info' array by
2651 500 elements at a time (rather than MAXFOLDERS / 5).
2653 * Add note to man page for mhmail that zero length messages are
2654 not sent. Need to use -body "" to send empty messages.
2656 * zotnet/mts/mts.c : compare character with '\0', not NULL.
2658 * sbr/getcpy.c : assign '\0' to character, not NULL.
2660 * add m_fmsg to most programs in uip so that they explicitly free
2661 folder/message structure when done with folder.
2663 * uip/slocal.c : cleanup processing of sender. Make sure it is
2664 defined even if message is missing "From " line.
2666 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
2668 * Released nmh-0.10.
2670 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
2672 * Add configure check for <locale.h>. Turn on LOCALE support
2675 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
2677 * Reversed previous decision to retain "From " lines in slocal.
2678 The "From " line is now removed from all messages.
2680 * inc now saves the date from the "From " envelope in the
2681 Delivery-Date header for all messages.
2683 * sbr/m_getfld.c: Clean up processing of Return-Path and
2684 Delivery-Date from the "From " envelope.
2686 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
2688 * client.c: cast iaddr to int before comparing return value
2689 of inet_addr with NOTOK.
2691 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
2693 * Grep test for signal names was failing on some OS'es because
2694 of missing tabs in regex.
2696 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
2698 * Released nmh-0.09.
2700 * Move config files and format files to *.old before installing.
2702 * Add configure check for killpg.
2704 * msh.c: include <termios.h> instead of <termio.h> and
2707 * prompter.c: don't include <sys/ioctl.h> anymore.
2709 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
2711 * Added `-mime' and `-nomime' options to `repl'.
2714 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
2716 * ruserpass.c : removed conflicting prototypes.
2718 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
2719 by `mesg' command. Previously only worked on BSD machines.
2721 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
2723 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
2724 than hard coded "/etc/utmp".
2726 * Released nmh-0.08.
2728 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
2729 when accessing ndbm/db file for duplicate suppression, instead of
2730 locking database itself.
2732 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
2734 * Added slocal action `mmdf' to deliver to a file in mmdf format.
2736 * Changed the slocal actions `file' and `>' to always deliver in
2737 mbox (uucp) format rather than be determined by RPATHS config
2740 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
2741 rather than mmdf format.
2743 * slocal now adds Delivery-Date field to all messages (previously it
2744 only added it to messages when delivering them to a file). The
2745 "From " line is now retained on all messages if compiling with
2746 RPATHS, rather than being discarded.
2748 * rcvpack no longer adds the Delivery-Date field to messages.
2750 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
2752 * Removed the script packmbox, since it's functionality has been
2755 * Changed packf so that it uses mbox (uucp) format by default
2756 rather than mmdf format. Added options -mbox and -mmdf to
2757 packf so you can choose the preferred format.
2759 * Changed rcvpack so that it uses mbox (uucp) format by default
2760 rather than mmdf format. Added options -mbox and -mmdf to
2761 rcvpack so you can choose the preferred format.
2763 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
2765 * Changed nmh to use dot locking by default (although you
2766 can still easily change this in config.h).
2768 * Simplified locking code. Removed code allowing setting of
2769 locking type in mts.conf. Now the locking type and locking
2770 directory (if any) can only be set at compile time.
2772 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
2774 * Prefer getting timezone information from tm->gmtoff rather
2775 than tzset and external timezone variable.
2777 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
2779 * Fixed typo in ruserpass.c in the variable toktabs.
2781 * When ruserpass was added to LIBOBJS, it was missing
2784 * Released nmh-0.07.
2786 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
2788 * Add check to configure, so that if ruserpass, or _ruserpass
2789 is not found, build version of ruserpass in sbr.
2791 * Added define's to discard.c, m_getfld.c, and scansbr.c so
2792 the code that manipulates internals of stdio, will build
2795 * Added #define to control whether to compile the simple
2796 built-in FTP client in mhn.
2798 * Added configure check for ushort and ulong. Change code
2799 to use ushort/ulong rather than u_short/u_long.
2801 * A couple of small cleanups in locking code.
2803 * Added configure check for gmtoff element in struct tm.
2805 * Added configure check for tzset.
2807 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
2809 * Released nmh-0.06.
2811 * Removed code for machines that don't have socket
2812 interface (how could they get mail anyway?).
2814 * Removed code for BSD41 machines. I don't think there are
2815 many such machines around anymore.
2817 * Add configure check for function uname, and prefer it
2818 over gethostname. General cleanup of zotnet/mts/mts.c.
2820 * Change all `lseek' calls to use POSIX symbolic constants
2821 SEEK_SET, SEEK_CUR, SEEK_END.
2823 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
2825 * Check lex generated file in zotnet/tws and use
2826 pre-generated version if necessary.
2828 * Released nmh-0.05.
2830 * Change to use reliable signals on all platforms that have
2831 sigaction. Change so that interrupted system calls are
2832 restarted for all signals except SIGALRM. This fixes alarm
2833 handling code in smail.c for BSD based systems.
2835 * Added lorder and tsort commands so that created libs can
2836 be linked in one pass.
2838 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
2840 * Changed pidwait so that while it is waiting for a child,
2841 it should block signals rather than ignore them.
2843 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
2845 * Add checks to configure for dbm_open and -lndbm.
2847 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
2849 * folder -pop and folder -push were freeing some memory too
2850 quickly, which caused the entry popped from the stack to not
2851 become the current folder.
2853 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
2855 * Released nmh-0.04.
2857 * Define ospeed and PC in termsbr.c is OS doesn't have
2860 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
2862 * editfile will create a symbolic link to the altmsg if it
2863 can't make a link, on any machine supporting lstat. Formerly
2864 this would happen only on BSD42 based machines.
2866 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
2868 * traverse (in popsbr.c) wasn't calling va_start before using
2869 variable argument list. Fixes core dump in inc when using POP.
2871 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
2873 * The variable pass in remotemail needed to be set to
2874 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
2877 * inc and msgchk were using -rpop by default when configured
2878 with POP support. Default is now -norpop.
2880 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
2882 * By default, post will now give the SMTP HELO command with
2883 the local hostname. If you specify a hostname with the
2884 clientname: option in mts.conf file, post will give the
2885 HELO command with that name instead. If the argument to the
2886 clientname: option is empty, no HELO command is given.
2887 (From the MH-6.8.4 diff)
2889 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
2891 * When using `-help' for a command, it will also print its
2892 profile compents from .mh_profile. (From MH-6.8.4 diff)
2894 * "slocal -file" will now correctly takes its input from
2895 a file (currently need to specify full path).
2897 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
2899 * "slocal -debug" will now issue a warning if a non-blank
2900 line in the .maildelivery file has less than 5 fields.
2902 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
2904 * Changed slocal so that code for duplicate suppression
2905 (MH config was MSGID) is always built. Added the options
2906 -[no]suppressdup to slocal to turn this on/off.
2908 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
2910 * Released nmh-0.03.
2912 * Fixed problem where mark would core dump if no
2913 .mh_sequence file existed.
2915 * Fixed problem where slocal would core dump if -debug
2916 option was given, and certain headers were missing.
2918 * Added patch to slocal to add `folder' (+) action, which
2919 is shorthand for piping message to rcvstore. Updated
2922 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
2924 * Changed flist option -unseen to -[no]all. Cleaned up
2927 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
2929 * Fixed flist. Changed the profile component `Folder-Order'
2930 to `Flist-Order. Added option `-sequence' to flist, so
2931 you can specify the name of the sequence to search for.
2933 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
2935 * A few minor portability cleanups. Changed to use PATH_MAX
2936 rather than MAXPATHLEN. Don't assume ospeed variable exists
2937 in termsbr.c. Removed some conflicting prototypes.
2939 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
2941 * Add configure test to check if tgetent will accept NULL
2942 and allocate its own buffer. Borrowed from zsh.
2944 * Changed libpath to etcpath.
2946 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
2948 * Cleaned up source code and Makefiles, so that if your `make'
2949 supports the VPATH option, you can build nmh in a different
2950 directory from where the source code is located.
2952 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
2954 * Released nmh-0.02.
2956 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
2958 * Split mhook man page into man pages for rcvdist, rcvpack,
2961 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
2963 * Changed code to use strerror, rather than using sys_errlist
2964 and sys_nerr directly.
2966 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
2968 * -compat switch from install-mh removed.
2970 * Changed the default POP port from "pop" to "pop3".
2972 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2974 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2975 (again) to mhn.defaults.sh. Changed find_program (again) to
2976 mhn.find.sh. mhn.defaults.sh now takes the search path
2977 as an argument. Default search path is now specified in Makefile
2978 rather than in script.
2980 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2982 * Changed mtstailor file to mts.conf. Updated man pages.
2984 * Changed si_value to si_val in mhn.c, since it conflicts with
2985 macro defined on Solaris.
2987 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2989 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2990 support for Emacs front-end mhe. It is on by default.
2992 * Added the following configure options: --enable-nmh-pop to
2993 enable client side pop support, --enable-nmh-smtp to enable
2994 SMTP support. Client-side pop support now compiles. Man
2995 pages for inc, msgchk, mh-chart now correctly added pop
2998 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
3000 * Added configure test for bug in C libraries where linker
3001 can't find ruserpass, but can find _ruserpass.
3003 * Fixed configure test so that termcap variable ospeed is
3006 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
3008 * Source files converted to ANSI C.
3010 * md5 now compiled separately rather than being included
3011 in mhn.c. Changed md5 to use memset and memcpy.
3013 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
3015 * Collected the error routines adios, advise, admonish, and advertise
3016 into one file (error.c), and did some rearranging of the code.
3018 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
3020 * Added awk script sigmsg.awk (originally written by
3021 Geoff Wing <mason@werple.apana.org.au> for zsh) to
3022 automatically generate signal messages for pidstatus.c.
3023 Added files sbr/signals.c, h/signals.h. Code now uses
3024 sigprocmask to block signals (if available). Code now uses
3025 signal blocking on non-BSD machines.
3027 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
3029 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
3031 * Released nmh-0.01.
3033 * Added configure code to check for type of signals functions
3034 you have (POSIX or BSD style signals). Added function
3035 SIGPROCMASK to simulate sigprocmask on machines that don't
3038 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
3040 * Added -version switch to all commands. Also added to
3043 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
3045 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
3046 POSIX termios.h style functions if present.
3048 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
3050 * Changed support/general/bootmhn.sh to output new mhn_defaults
3051 file to standard output by default (makes it easier for testing).
3052 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
3053 script to find_program.
3055 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
3057 * Added patch to uip/folder.c from exmh distribution to
3058 speed up -recurse option.
3060 * Added flist command from exmh distribution. It doesn't work
3061 yet, but it compiles :-)
3063 * Changed default location for install to
3064 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
3065 and configuration files go in nmh/etc, and support binaries go
3066 in nmh/lib. Of course, all this can now be changed in the top
3069 * Started with mh-6.8.3 as based and converted to autoconf.
3070 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
3071 Pop support and plenty of other things, are now broken.
projects / nmh / blob