1 Wed Jun 7 20:52:33 CEST 2000 Ruud de Rooij <ruud@ruud.org>
3 * Added one more mkstemp invocation to uip/spost.c (which was in a
6 * Applied patch from Peter Maydell to clean up permissions handling
7 and error handling in uip/inc.c.
9 Mon Jun 5 22:10:07 CEST 2000 Ruud de Rooij <ruud@ruud.org>
11 * Use cat instead of tsort if tsort cannot deal with loops in its
12 input (which is the case for tsort from GNU textutils).
14 Mon Jun 5 21:14:36 CEST 2000 Ruud de Rooij <ruud@ruud.org>
16 * If lockfile is present, and its dotlockfile program is setgid,
17 inc does not need to be setgid.
19 Sun Jun 4 21:35:40 CEST 2000 Ruud de Rooij <ruud@ruud.org>
21 * Added autoconf test for Miquel van Smoorenburg's liblockfile
22 library, as found on Debian systems.
24 * Added liblockfile support to sbr/lock_file.c.
26 Wed May 31 7:19:30 2000 Shantonu Sen <ssen@mit.edu>
28 * Fixed up dtimep.lex a bit. Added back memory options for AIX to
29 increase available memory. Took out %option noyywrap, which
30 wasn't understood by AT&T lex, as well as the -i
31 case-insensitivity flag.
33 Wed May 31 07:40:45 2000 Doug Morris <doug@mhost.com>
35 * added a lint target to the Makefiles and a check in autoconf
36 to determine whether lint or lclint exists on the system.
38 Fri May 30 19:21:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
40 * etc/Makefile.in was incorrectly installing mts.conf.in and
41 sendfiles.in -- fixed. Generated sendfiles script was not a
42 dependency of the `all' target, and was incorrectly included in
43 the distribution. Changed the suffix for the backed-up previous
44 versions of the etc files from the ambiguous .old to .prev. Added
45 call to diff -- only keep the .prev files around if different from
46 the newly-installed versions (intentionally didn't redirect output
47 to /dev/null so you'll notice when your changed versions are
50 * INSTALL never documented the etc/*.old thing. Documented the
51 new etc/*.prev thing (including a note to watch for diff output).
53 * Applied Alec Wolman <wolman@cs.washington.edu>'s dropsbr.c patch:
55 In the map_write routine, a call is made to map_open and this
56 call is supposed to set the "clear" variable to 0 or 1,
57 depending on whether the map file is empty or not. In
58 mh6.8.3, this worked because map_open would set "clear" by
59 calling the mbx_Xopen routine. In nmh, the code for mbx_Xopen
60 was merged into mbx_open, but the interface for mbx_open
61 doesn't support the clear variable, so that functionality was
62 lost. The map_open interface still contains "int *clear" in
63 the prototype, but never sets it.
65 My patch eliminates "clear" from the map_open interface (I
66 checked to make sure that map_write is the only client of
67 map_open). Furthermore, my patch also sets the "clear"
68 variable properly at the beginning of map_write by calling
69 fstat(). This eliminates the bug in that the value of "clear"
70 being used later in the routine was just stack garbage.
72 Having a bad value of clear causes this next bug to be
73 triggered: The fp file pointer was being opened with fdopen,
74 but in two of the three switch cases it wasn't being closed.
75 In certain cases, this was causing packf to run out of file
76 descriptors if you attempted to pack a large folder.
78 Mon May 29 7:48:15 2000 Shantonu Sen <ssen@mit.edu>
80 * Moved the date parsing routines from zotnet/tws to sbr/ (and
81 tws.h to h/). Updated all source files to reflect to new location
84 * Rewrote dparsetime (dtimep.c) to replace the old
85 zotnet/tws/dtimep.c, lexstring.c, lexedit.c, and
86 dtimep.c-lexed. It should now work with flex (although untested
87 with lex), and requires no sed-ing. For now, I have the lexed
88 version in the distribution, so that end-users don't need to worry
89 about running it through flex/lex. I have not added back support
90 for guessing the time zone when it's not specified.
92 Sun May 28 17:44:15 CEST 2000 Ruud de Rooij <ruud@ruud.org>
94 * Added autoconf check for getutent().
96 * Changed uip/rcvtty.c and uip/slocal.c to use getutent() and
97 friends. Since I can only check on Linux, please check if
98 this works on other systems.
100 Sun May 28 14:58:49 CEST 2000 Ruud de Rooij <ruud@ruud.org>
102 * Applied patch from Peter Maydell to uip/scansbr.c for more
103 checks for write failures.
105 * Unlink temporary file properly in uip/rcvtty.c.
107 * Moved viamail from bindir to libdir.
109 * Changed sendfiles into sendfiles.in, so that path to viamail
112 * Added gzip support to sendfiles.
114 * Added References header to replcomps and replgroupcomps.
116 Sun May 28 14:39:31 CEST 2000 Ruud de Rooij <ruud@ruud.org>
118 * Fixed m_getfld bug which caused segmentation faults when
119 incorporating messages which ended in multiple linefeeds crossing
122 Fri May 26 13:21:59 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
124 * msh has been unable to show MIME messages ever since 1.0. Alec
125 Wolman <wolman@cs.washington.edu> tracked down the problem to the
126 -show flag being passed to mhshow. mhshow is equivalent to the
127 old mhn -show, so we don't need the -show anymore. Removed it.
129 Fri May 12 02:51:21 2000 Shantonu Sen <ssen@mit.edu>
131 * zotnet/bboards is not longer built by default. Goal is to move
132 the assorted functions in zotnet into sbr or some more logical
135 * Moved zotnet/mf to sbr, and changed mf.h references accordingly,
136 as well as Makefiles.
138 Thu May 11 02:21:34 2000 Shantonu Sen <ssen@mit.edu>
140 * Simplified sbr/Makefile.in so that both SRCS and OBJS aren't
141 seperately and redundantly defined, but so that OBJS is a
142 pattern-substituted version of SRCS with suffix .c -> .o. This
143 should make maintainability easier.
145 * Added section to MACHINES indicating what platforms nmh is known
146 to compile and work on, just to give users peace of mind, or
147 something. This is by no means complete or exhaustive, so add
148 whatever you know works.
150 Tue May 09 20:38:04 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
152 * Alphabetized Shantonu's $pop_kinds output on configure's "pop is
153 enabled" line. If POP3 is the only kind of POP enabled, say so,
154 rather than just saying "yes" (which is ambiguous).
156 * Fixed four warnings in Shantonu's new getpass.c. Needed to
157 #include <stdlib.h> for calloc(), <unistd.h> for ttyname(), and
158 "h/mh.h" for adios(). Also changed ch from char to int to get rid
159 of "comparison is always 1 due to limited range of data type" on EOF.
161 * Added steps to README.developers saying to change the version
162 number to X.Y.Z+dev. Did a little rearranging and changed the FTP
163 dir from /home/ftp to /var/ftp to reflect Doug's new machine.
165 * Changed configure.in to use gcc -Wall even without
166 --enable-debug, to prevent developers compiling optimized from
167 introducing warnings, and to give end-users a warm, fuzzy feeling
168 as they (hopefully) see no warnings come out (except perhaps on
169 the lex output file) even with -Wall.
171 * Renamed getpass() to nmh_getpass() since the prototype for
172 getpass() varies from OS to OS, and we want to _always_ use our
173 version of the function. Fixed all the callers to use
174 nmh_getpass() and added it to prototypes.h. Semi-arbitrarily
175 upped MAX_PASSWORD_LEN from 128 to 256. buf was being calloc()'d
176 and the memory leaked -- should have just been declared as static
177 char array. Prepended "Portions of this code are" to the
178 copyright message, as this version has been changed significantly
179 from the BSD version.
181 * Added "nmh-local functions to use in preference to OS versions"
182 section to README.developers (currently just says to use
183 nmh_getpass() instead of system getpass()).
185 * Prepended "Portions of this code are" to the copyright message
188 * Added mts.conf.5 page per Neil W Rickert <rickert+nmh@cs.niu.edu>'s
191 This happens on solaris:
194 windex entry incorrect: mts.conf(5) not found.
195 No manual entry for mts.conf.
199 % echo ".so man5/mh-tailor.5" > mts.conf.5
201 done in the man5 directory. We need to add 'mts.conf.5' as a
202 reference sourcing mh-tailor.5.
204 Mon May 08 23:51:55 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
206 * Doug informed me that the way I had restored the "lost" version
207 histories was wrong, because `cvs checkout's of old versions of
208 nmh wouldn't work properly. It occurs to me that this could be
209 fixed by simply deleting those tags in the new-location *,v files,
210 but oh well. I'm putting everything back to the way Doug
211 originally had it. To get the old version history for a file that
212 used to be in the top directory, you'll need to "blindly" do a
213 `cvs log' there (even though you won't have a local copy of the
214 file in that directory). `cvs diff' will no longer be able to
215 diff pre-move versions vs. post-move versions -- you'll have to do
216 a lot of manual gyrations with `cvs checkout' and then use `diff'.
218 * I had alphabetized the --configure options in the --help output
219 awhile back, but Shantonu added --enable-apop just under
220 --enable-pop. Put it in alphabetical order and clarified what
221 --enable-apop does vs. --enable-pop and --with-krb4. Also changed
222 --with-mts help line from "mail transport agent" to "mail
223 transport agent/service" so the 's' in "mts" doesn't seem to come
226 * Added two steps to "releasing nmh" in README.developers. After
227 making the tarball, it's a good idea to diff the tree vs. the CVS
228 tree to make sure no files got left out, and then to chown the
229 files so that they're owned by root, preventing a Trojaning attack
230 by a malicious remote user with a UID matching yours.
232 * Changed DIFFERENCES to say that RPOP is not currently supported
233 rather than implying it by saying that APOP, KPOP, and POP[3] are.
235 Sun May 07 18:16:43 2000 Shantonu Sen <ssen@mit.edu>
237 * Imported NetBSD version of getpass() and made extensive
238 revisions for compatibility with programs that pipe the password
239 to stdin, such as exmh.
241 * Removed tests for system ruserpass() which sometimes gave
242 phantom positive results. Also, bext to use internal functions if
243 we ever want to change .netrc format to something else, or access
246 Sat May 06 08:28:09 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
248 * Restored lost version histories for those moved files by doing a
249 manual `mv' in the CVSROOT on mhost. CVS badly needs a `cvs mv'
250 command so that you can move files (without having physical access
251 to the CVSROOT) without losing versioning. Put MACHINES back at
252 the top level as it needs to be read before building. Fixed DIST
253 variable in {.,docs}/Makefile.in to reflect that and to add
254 missing entry for "INSTALL" file.
256 Sat May 06 13:13:07 2000 Doug Morris <doug@mhost.com>
258 * Re-cleaned up nmh documentation (by moving things to docs
259 subdir) and modified Makefile & configure.in to handle the change.
261 Mon Apr 17 21:28:40 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
263 * Scott Blachowicz pointed out that the configure --help output
264 for --enable-masquerade was misleading. Clarified.
266 Mon Apr 17 19:01:00 2000 Shantonu Sen <ssen@mit.edu>
268 * APOP support can be compiled in to inc and msgchk using
271 * To access an APOP host, specify -apop on the command line
272 along with any -host or -user option.
274 Fri Apr 14 23:10:44 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
276 * Upped the version number to 1.0.4+dev until the next nmh release.
278 * Added a "releasing nmh" section to README.developers, while the
279 process was fresh in my mind.
281 Fri Apr 14 18:21:34 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
283 * Added new files README.developers, ChangeLog_MH-3_to_MH-6.6, and
284 ChangeLog_MH-6.7.0_to_MH-6.8.4.html to DIST target in Makefile.in.
286 * Released nmh-1.0.4.
288 Tue Apr 11 21:37:03 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
290 * Applied Brian Campbell <bacam@tardis.ed.ac.uk>'s mhn.defaults.sh
293 It appears that there shouldn't be quotes around the %s in the
294 iso-8859-1 charset entry; xterm passes the remaining arguments
295 to the program, quoting them means that xterm thinks they're
296 part of the program's name.
298 This %s isn't the same as the "Insert content subtype" one from
299 mhshow-show-* -- it doesn't come from MIME headers and is safe not
302 Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
304 * added check in fmt_compile() to handle a single-character
305 format string. fmt_compile() depends on having an array of
306 format characters with an empty item at the end. A
307 single-character format would cause programs using this
308 function to segfault because the algorithm used to decide on
309 the length of the array mistakenly created a single-item array
310 when the format string was one character. This eventually
311 caused problems when the program attempted to test item+1
314 Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
316 * Richard Coleman threw out a lot of old MH-specific files in nmh.
317 Much of the stuff, indeed, is not worth saving, but there are
318 nuggets that are very worthwhile, and should probably be added
319 back in. Most important, IMHO, are the MH change logs, as they
320 can help answer questions like "Why is this code like this?" or
321 "How long has this been broken?" or "What was this ever used for?"
323 I've added a new file to the nmh tree called
324 ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
325 mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
326 to go from newest at the top to oldest at the bottom to match the
327 ChangeLog convention. Unfortunately there are no change logs for
328 versions of MH prior to 3 in the MH tar files available at
329 <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
330 are MH-6.6 changes that aren't documented in the logs.
332 I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
333 based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
334 and its "catman"-type output are a pain to deal with, but I was
335 loath to throw away the formatting, so I converted the file to
336 HTML. The only actual markup in the body are the "<B>" and "<U>"
337 tags, and "<" and ">" instead of '<' and '>', so it's quite
338 doable to view the file in plain ASCII mode as well. Note that
339 some of the changes this file documents as having been made in
340 MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
341 and later put in certain 6.8.4 stuff.
343 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
345 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
346 fixing apparent bugs in Dan Winship's new security quoting code:
348 Since upgrading, I've been getting the following errors
349 while attempting to process some MIME messages:
351 (1) Syntax error: Unterminated quoted string
356 (2) line 1/10 (END)Segmentation fault (core dumped)
358 (2) appears to be due to the testing of an unset pointer in
359 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
360 mis-quoting a filename being handed to the shell in
361 mhshowsbr.c:show_content_aux().
363 Resolving the pointer reference issue in
364 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
365 problem in the routine.
367 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
369 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
370 prevent core dumping on packf. Here's the note from his message:
372 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
373 core on a file w/o a From line with a line >= BUFSIZ.
374 I noticed this because I had a junk file in my mail
377 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
379 * wesley.craig@umich.edu did not document his previous KPOP patch,
380 so I did so, and asked him to check what I wrote. Unfortunately
381 he didn't notice my misunderstanding of his patch. I wrote that
382 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
383 exclusively, but if you leave it as "pop3", you can use Wesley's
384 new -kpop switch on a given invocation. Instead, however, -kpop
385 turned out to be necessary on every invocation, and a KPOP user
386 complained. Applied Wesley's new patch, which makes things work
387 like I thought his original patch did. After that, did one more
388 clarifying pass to the documentation in inc.man and msgchk.man.
390 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
392 * When I fixed the long-standing makedir() bugs in January, I had
393 the code call strtoul(..., 0), which I believed to be safe as all
394 modes specified as ASCII constants in the nmh code started with a
395 leading zero (signifying octal), which I did as it would work if
396 internal constants were ever changed to hex. Unfortunately I was
397 unaware of the "Folder-Protect:" .mh_profile entry, which
398 mh-profile.man documents as an octal-only constant, with no
399 leading zero required. I've changed the strtoul() call to an
400 atooi() call and removed the misleading leading zeroes on the
401 ASCII octal constants in the code and man pages. Also changed the
402 "Folder-Protect:" example in the man page to something more
403 interesting than a duplication of the default.
405 * When I added my --enable-masquerade option, you'll note that I
406 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
407 options too wordy and I'm not sure why Richard went that route.
408 I've renamed them to just --enable-*, but the old versions will
409 still work as well (they just aren't advertised).
411 * Added a line to the "nmh configuration" output saying whether
414 * Added a new README.developers file. From the file:
416 This file is intended to provide a few tips for anyone doing
417 development on nmh. Developers who learn things "the hard
418 way" about the nmh codebase (as opposed to local info best
419 encoded in a comment) are encouraged to share their wisdom
422 Currently the topics are "autoconf files" and "directory structure".
424 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
426 * Applied, after some finessing,
427 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
429 Here's a patch that allows you to add
431 --with-smtpservers=<some.host.name>
433 to the ./configure command line to set the "servers: " line in
434 etc/mts.conf. Around here, we use "mailhost" so that all
435 machines in the current domain just talk to a central machine
436 and nothing else runs an MTA. Now, I can use
438 --with-smtpservers=mailhost
440 instead of having to remember to fix this by hand (and often
441 forgetting to do so!).
443 * Inspired by Simon's patch, added an --enable-masquerade option
444 to configure. It will set the "masquerade:" line of mts.conf.
445 You may specify a subset of the three types of masquerading, like
446 --enable-masquerade="draft_from mmailid", or leave off explicit
447 arguments to enable all three types.
449 * Alphabetized the --enable and --with options in configure.in and
450 INSTALL and added documentation of the two new options to the latter.
452 * Added new dependency for mts.conf: Makefile. If this isn't
453 done, then when you reconfigure nmh with new values for
454 --enable-masquerade or --with-smtpservers, you'll fail to get an
455 updated copy of mts.conf.
457 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
459 It seems that some MUA's didn't handle y2k very well - ELM
460 seems to be one of them, and Ultrix's DXmail (based on MH!).
461 I've got a few emails this month that look like:
463 575 Jan 00 Xxxxxx Xxxx 3603 ...
465 22+ Jan 00 Xxx Xxxxx 1771 ...
467 The first has "15 Jan 100" as the date and the second has
468 "19 Jan 00" as the date. The following works around this so
469 that scan, show, sortm, etc work ok.
471 I put Simon's patch under the control of a new #define called
472 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
473 acconfig.h about when you might not want to #define it.
475 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
476 lexed on Solaris 2.6. Added missing dependency in
477 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
479 * Added scan.MMDDYY and scan.YYYYMMDD format files.
481 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
483 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
485 With the patch below, you can add lines like:
487 mhshow-suffix-application/msword: .doc
488 mhshow-suffix-application/PostScript: .ps
490 to the mhn.defaults file to append the given suffix to a
491 scratch file. This allows applications which require a
492 certain suffix to run properly.
494 * Removed -force_html from lynx entry in mhn.defaults.sh (I
495 believe older versions of lynx lack that option) and added
496 "mhshow-suffix-text/html: .html".
498 * Modified username_extension masquerading to only use the
499 extended address on generated [Resent-]From: lines and SMTP
500 envelope From:. With Neil's original implementation, nmh's global
501 idea of the username was changed, which would result in inc lying
502 and saying you had no new mail because it was looking for a
503 mailbox called, for instance, "dan-nmh" (where username was "dan"
504 and $USERNAME_EXTENSION was "-nmh").
506 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
508 There's a wrap-around problem that affects the implementation
509 of Zeller's congruence in dtime.c. This causes the day-of-week
510 calculations to fail for dates after Feb 29, 2000 (probably up
511 until some year far in the future).
513 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
515 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
517 I finally tracked down the problem in msh that was causing
518 errors whenever I tried to examine a 'mmdf' style mailbox.
520 It turns out that not enough memory was being allocated with
521 calloc(), causing memory pointers to be overwritten and
524 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
526 * Changed the new "plussed_user" option to mts.conf's
527 "masquerade:" to "username_extension" after getting feedback from
528 qmail users, who use '-' as a separator rather than '+'. Removed
529 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
530 which needs to include the appropriate separator for your MTA
531 ('-', '+', or whatever) as its first character.
533 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
535 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
537 * Added a note to DIFFERENCES stating that it's out-of-date
538 (Richard was the last one to update it) and that we should
539 consider only documenting incompatibilities with MH there.
541 * Implemented (and documented) a third kind of username
542 masquerading: "plussed user" masquerading. This one was suggested
543 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
544 "plussed user" feature, where mail sent to <user>+<string> will be
545 delivered to <user>. When it's enabled, it's controlled by the
546 $USERPLUS environment variable. How is it enabled? Well, that
549 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
550 changed it so that rather than being a boolean, it can be set to
551 any combination of the three values "draft_from", "mmailid", and
552 "plussed_user". Thus it is now possible to enable the three types
553 of masquerading individually.
555 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
556 where if it was turned on, ','s would no longer be considered
557 GECOS field delimiters.
559 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
561 * Changed the GECOS-field '&' translation behavior to be
562 controlled by the BSD42 #define rather than GCOS_HACK, since it's
563 apparently always appropriate on OSes where BSD42 is #defined, and
564 never appropriate on any other OSes. Thanks to Kimmo Suominen for
565 responding to my "What is this code here for?" comment in mts.c
566 and explaining the feature.
568 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
570 * Upped the version number to 1.0.3+dev (ideally this should be
571 done by whoever makes a release tar file, immediately after doing
574 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
575 patch, posted to comp.mail.mh, which he says prevents loss of mail
576 when inc'ing into a full filesystem.
578 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
579 so that stamp-h.in will be different each time configure.in and
580 related files are changed, making it easier to check it in (which
581 is necessary to prevent unnecessary autoconf calls).
583 * My declaration of initgroups() in slocal.c to eliminate the "no
584 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
585 use AC_EGREP_HEADER to see where initgroups() is declared, if
588 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
590 * Fix security hole in mhshowsbr.c which allowed untrusted shell
593 * Released nmh 1.0.3.
595 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
597 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
598 be surrounded by single quotes, as a shell is not spawned when
599 just saving files, and the filenames will end up with literal
600 quotes embedded in them.
602 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
604 * Whoever originally added the -help switch to all the commands
605 got too cute and had the option itself print out as "-(help)" in
606 the -help output. One theory is that they were making reference
607 to the fact that clearly you know about the -help option since
608 you're currently looking at its output. I think it's a bad idea
609 to overload the meaning of the parentheses, however -- they're
610 supposed to indicate what abbreviated prefix of the switch you're
613 The other theory is that because you can say something like
614 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
615 by the same list of switches you get with -help, they were saying
616 you can "sorta" abbreviate "-help" as "-". You don't get the
617 "Usage:" string, though, so it's not really the same thing.
619 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
621 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
623 The following patch fixes a problem with requesting a
624 service key for a machine that has multiple 'A' records. It
625 also makes "-kpop" a command line option, for users who
626 would like to use both "kpop" and "pop".
628 Did no testing of the new features, as I don't have access to a
631 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
633 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
635 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
637 * All %-escapes in mhn.defaults that actually expand to something
638 should be surrounded by single quotes. Added quotes to the ones
639 in mhn.defaults.sh that were missing them.
641 * Added check for lynx to write mhshow-show-text/html line in
644 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
646 * makedir() had multiple bugs dating back to MH. An octal
647 constant was apparently being interpreted as decimal, resulting in
648 directories with no user read or execute permissions, making
649 nested directory creation fail. And there wasn't even an
650 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
651 in .mh_profile) on the outer directories of a nested directory.
653 * A second `make install' would always fail because the check for
654 whether mh_profile.5 existed was written incorrectly.
656 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
658 * Added documentation on both types of masquerading to post's man
661 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
663 * Doug's portability fix of my setgid inc autodetection had a
664 caching bug -- if you re-ran configure, uip/Makefile would be
665 corrupted, and installation would bomb out on OSes where inc needs
668 * Implemented a new kind of email address masquerading. Usually,
669 when a user writes a custom "From:" header in a draft, nmh uses it
670 rather than generating one. However, the user's true address is
671 used in the SMTP envelope "From:" and is revealed in the "Sender:"
672 header. Now, when mmailid is set to non-zero, the envelope
673 "From:" uses the address specified in the draft "From:" header,
674 and there is no "Sender:" header. This is useful when sending on
675 behalf of a remote POP3 account or when remote mail robots
676 incorrectly use the envelope "From:" in preference to the body
677 "From:". This processing has only been implemented for post, not
678 for the undocumented spost (which was already missing some "From:"
679 processing that post has).
681 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
683 * Got rid of the rest of the gcc -Wall warnings that I didn't have
684 time for on 1999-07-15 (and, it would seem, some new ones people
685 introduced since then). The primary ones were the warnings that
686 default prototypes were being used for [v]snprintf() and
687 str[n]casecmp(). As of right now, there are _no_ compilation
688 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
691 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
693 * Move mhtest from bindir to libdir.
695 * Move sendfiles from libdir to bindir.
697 * Updated sendfiles manpage to reflect this change.
699 * Added documentation for -build and -file switches to repl and
700 forw manpages (patch from Peter Maydell).
702 * Fixed interaction between specifying -cc in profile and -group on
705 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
707 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
708 not unanimous support for my proposed even/odd release/developer
709 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
712 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
714 * Upped the version number to 1.0.3. If we don't do this, then
715 when people report bugs against 1.0.2, we won't know "which" 1.0.2
716 they're talking about (since the development source is publically
717 available via CVS). I think the Linux kernel version numbers are
718 a good model, so the next time we roll a tarball, it should be
719 version 1.0.4 (or higher -- anyhow, an even-numbered version).
721 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
723 * Released nmh-1.0.2.
725 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
727 * Added check for whether "libtool" is in fact gnu libtool. If
728 it is, it is not used. This is the wrong behavior. If vendor
729 XYZ later on decides to create yet another libtool, we'll be
730 caught again. This works for now.
732 * Minor updates to MACHINES refering to Mac OS X.
734 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
736 * Added check for "libtool" (a ranlib type tool for Mac OS X)
737 and modified Makefiles so that nmh will build under Mac OS X.
739 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
741 * Changed repl defaults to partly revert to MH behaviour,
742 "-cc all" is now only implied with -group.
744 * The replcomps template includes cc: header again (as in MH).
746 * Updated repl man page to reflect these changes.
748 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
750 * Tweaked configure to handle Solaris and SunOS after the BIND
751 changes. Both need more cleanup.
753 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
755 * Removed BIND define and replaced it with a check for
756 gethostbyname (to determine if the host is DNS aware) and a
757 check for sethostent. This appears to be the right thing to
758 do, but there is no explanation of the reasoning behind the
759 BIND define in the code and it appears to have been used for
762 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
764 * Updated manpages Makefile to link mh-profile.5 to
765 mh_profile.5 after installation. Suggestion from Richard Cohen
766 <richard@jubjub.demon.co.uk>.
768 * Modified configure.in to check for _IO_write_ptr and libio.h
769 to determine whether to define LINUX_STDIO instead of using
772 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
774 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
775 multiple machines in the past where the mail spool was a symlink
776 to a directory on another device with more free space.
778 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
780 * Fixed a portability problem in Doug's fix of a portability
781 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
783 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
785 * Added config.sub and config.guess to the list of files to be
788 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
789 added if a list of addresses was split over several header lines.
791 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
792 macros, regardless of platform.
794 * Allow q to quit mhshow, and n to skip to next part. Patch from
795 Kimmo Suominen <kim@tac.nyc.ny.us>.
797 * Modified mhstore to recognize attachments created by sendfiles
798 with x-conversions=gzip.
800 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
802 * added explicit cast to long from time_t for tclock in
805 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
806 it's needed for ioctl() anyway. This prevents a warning about
807 implicit definition of ioctl().
809 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
810 "User Configuration" section of config.h (moved @TOP@ in
811 acconfig.h) so they're easier to find, should someone actually
812 want to mess with them.
814 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
816 * updated Makefile.in so it recognized COMPLETION-TCSH and
817 COMPLETION-ZSH (only used in make nmhdist).
819 * added prototype for ruserpas to <h/prototypes.h>. Fixes
820 warnings in mhparse.c and mhbuildsbr.c.
822 * added include checks for <time.h> and <sys/time.h> to
823 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
824 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
826 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
827 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
828 warnings about implicit definition of mts_init().
830 * added <grps.h> to slocal.c to prevent warnings about
833 * added <h/signals.h> to prevent warning about missing SIGNAL
836 * added function prototypes to smtp.c, whatnowproc.c,
837 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
840 * explicitly declared mbx_style in mshcmds.c and lused in
841 fmtdump.c as type static int instead of just static to
844 * various code cleanups to prevent ambiguous statements
845 (brackets for if/thens and parens for complicated if
849 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
851 * commented out _cleanup() in mf.c because it's the only
852 location in all of the source code where it exists. It was
853 preventing compilation on at least linux.
855 * Added check for <db1/ndbm.h> which is the new location where
856 linux systems appear to be stuffing this header file.
858 Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
860 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
862 * added mh_profile SEGV patch from Richard Cohen
863 <richard@jubjub.demon.co.uk> that prevents crashing when
864 mh_profile doesn't end in a newline. A similar patch was
865 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
867 * fixed bug in associated with MAILGROUP #define (group "mail"
868 is not universal) -- hard to believe, but true.
870 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
872 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
874 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
876 * Automated #define of MAILGROUP and installation of inc as setgid mail
877 when the mail spool directory isn't world-writable.
879 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
881 * slocal -debug used to leave a file in /tmp for each message
882 processed. Very bad for folks with slocal -debug in their .forward!
884 * Got rid of a ton of compilation warnings. Most were "junk"
885 warnings due to the use of gcc -Wall (without -Wno-parentheses),
886 but a few represented real bugs. There remain many warnings to be
887 tackled that are due to missing function prototypes (e.g. snprintf()).
889 * Default rcvdistcomps no longer puts a copy of all outgoing
890 messages in outbox. Added an rcvdistcomps.outbox that does.
892 Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
894 * Updated configure to check for mkstemp (available on OpenBSD) and
895 substitute it for mktemp if available.
897 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
899 * Added config.sub and config.guess and updated acconfig.h and
900 configure.in to automatically detect system type and set the
903 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
905 * Released nmh-1.0.1.
907 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
909 * Fixed flist to properly deal with relative folder names.
910 Problem noted by Jerry Peek <jpeek@jpeek.com>.
912 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
913 well as the Kerberos 5 compat libraries. Based on a patch from
914 Assar Westerlund <assar@sics.se>.
916 * Added a check in configure.in to test if modf is in libc and
917 link with libm if not. This is needed by at least Digital UNIX.
918 Problem pointed out by Kevin Oberman <oberman@es.net>.
920 * Fix a bug from the "mhn -show" to "mhshow" renaming that
921 made the "list" command in whatnow not work for some users.
922 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
924 * Replaced "extern int errno" with "#include <errno.h>" in a
925 number of files. Suggested by Stephen Wilson Bailey
928 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
929 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
931 * Fixed a segmentation fault in inc. Patch originally from Ruud de
932 Rooij <r.c.m.derooij@twi.tudelft.nl>.
934 * Allow display of 8bit encoded messages. From Kimmo Suominen
937 * Fixed repl to not add line breaks in the middle of long
938 addresses when building a reply. From Ruud de Rooij
939 <r.c.m.derooij@twi.tudelft.nl>.
941 * Added -library switch to spost so it can parse user aliases like
942 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
944 * Changed configure.in's check for sigsetjmp to properly deal
945 with systems like Linux where it is a macro. From
946 <elleron@servtech.com>.
948 * Fixed a bug in whatnow that could cause it to sometimes exit
949 without prompting the user. Based on a patch by Richard Geiger
952 * Added code to deal with SIGPIPE in mhl so it doesn't print
953 "Broken pipe" if you quit out of the moreproc.
955 * Documentation: Added a note to MACHINES about Irix make. Added a
956 pointer to the online copy of the MH book in INSTALL. Added
957 some additional information to the whatnow and packf man pages,
958 suggested by Jerry Peek <jpeek@jpeek.com>.
960 * Updated INSTALL, FAQ, etc to not refer to Richard as the
961 maintainer or math.gatech.edu as the home any more.
963 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
967 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
968 mbx_open so that the mode of zero length maildrops
969 would not be changed.
971 * Replaced the substitute version of snprintf() with the
972 one from the Apache web server.
974 * Changed to default mode for creating new messages to 0600
975 (this should have been done a long time ago).
977 * Changed "flist" to handle searching for multiple sequences
978 for each folder. Also flist will now correctly split
979 Unseen-Sequence if it consists of multiple sequences.
981 * Added new switches `-unlink' and `-nounlink' to "refile".
983 * Added new switches `-unlink' and `-nounlink' to "rmm".
985 * More cleanups of slocal output. Changed adorn() to
986 send to stdout, instead of stderr (to match rest of
989 * Merged mbx_create() into mbx_open, so that creating and
990 opening a nonexistent maildrop is done atomically. This
991 removes a bad race condition.
993 * Fixed bug that caused slocal to be unable to save to MMDF
996 * Added new wrapper function usr_folder() to slocal.c to
997 handle adding message to folder (currently, it still uses
998 usr_pipe() to call rcvstore).
1000 * seq_list() checks for empty folder before scanning for
1001 sequence information.
1003 * num_digits() in flist.c and folder.c now returns correct
1004 value for 0. Also added sanity check.
1006 * folder_delmsgs() now correctly decrements internal message
1009 * Don't attempt to read sequence information if folder
1012 * Split seq_read into seq_public and seq_private.
1014 * Small change to sigmsg.awk, since newer versions of gawk
1015 interpret 034 as octal.
1017 * In flist, don't scan for sequence information in empty folder.
1019 * Updated mhn.defaults.sh to output profile entries for mhshow,
1020 mhstore, and mhbuild.
1022 * Changed configuration parameter "mhn-access-ftp" to
1023 "nmh-access-ftp". Updated man pages
1025 * Moved the code in InitMultipart to reverse the order of the
1026 parts in a multipart, into its own function "reverse_parts()".
1028 * Changed code in mhbuildsbr.c to store unencoded content
1029 in the c_cefile structure when building.
1031 * Changed code in mhoutsbr.c to look for unencoded content
1032 in the c_cefile structure when outputing message.
1034 * Changed configuration parameter "mhn-cache" and
1035 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
1036 since it is used in mhstore, mhlist, and mhshow. Updated man pages
1038 * Change configuration parameter "mhn-storage" to
1039 "nmh-storage", since it is now used in mhstore, mhlist,
1040 and mhshow. Updated man pages
1042 * Add autoconf support for KPOP (kerberized pop).
1044 * Add autoconf support for Hesiod.
1046 * Split routines to output a message given a Content structure
1047 (output_message, output_content, write7Bit, etc..) to a new
1050 * Split output_content(), into output_content() and build_headers().
1052 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
1053 list of header fields, rather than reopening the message.
1055 * Added free_header() to mhfree.c to free structures containing
1056 header field information.
1058 * Changed get_content() to use the linked list of header fields
1059 when parsing the various MIME headers (Content-XXX).
1061 * Changed get_content() to store linked list of header field
1062 values when parsing a content.
1064 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
1065 routines in mhcachesbr.c to handle the content cache.
1067 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
1068 cache_content) into new file mhcachesbr.c.
1070 * More calls to sprintf/strcpy (primarily in mhparse.c
1071 and mhbuildsbr.c) converted to snprintf/strncpy.
1073 * When a message is displayed with `mhshow', it is now
1074 removed from the "unseen" sequence.
1076 * Change the default "showmimeproc" to "mhshow".
1078 * Split "mhn -show" off into separate command "mhshow".
1080 * Split "mhn -store" off into separate command "mhstore".
1082 * Split "mhn -list" off into separate command "mhlist".
1084 * Add sanity checks to context_find(), context_replace(),
1085 and context_del(), to abort if context file hasn't been
1088 * Add calls to context_read(), to the beginning of all nmh
1089 commands (instead of being called indirectly by context_find).
1091 * Changes the "substitute" version of vsnprintf/snprintf for
1092 operating systems without native versions, to just call the
1093 native vsprintf(), and ignore the buffer length. This is
1094 faster, but less secure than the previous version that used
1095 temporary files. This should only be a problem for systems
1096 which do not have a native snprintf(), and require `inc' to
1099 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
1101 * Changes client() routine to take additional parameter, which is
1102 the buffer length of the parameter "response". Then added
1103 buffer length checks for this parameter.
1105 * Changed getws() to get_fields(), since that is apparently the
1106 name of a wide character version of gets() on some archetitures.
1108 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
1110 * Change the code in most of the commands that take multiple
1111 message names/sequences/ranges on the command, such that
1112 the msgs array is expanded dynamically. This removes most
1113 of the limits on the length of command lines.
1115 * Add additional parameter to copyip(), to specify the
1116 maximum number of strings that can be copied (security
1119 * Create new function getarguments(), to massage the argument
1120 vector before parsing it (add any arguments from your
1121 profile to the beginning of the argument vector). This
1122 also removed the general limit on the number of command line
1125 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
1127 * Released nmh-0.27.
1129 * Added a new command "delete", that is available during
1130 a "whatnow" session. It is equivalent to "quit -delete".
1132 * Added another parameter to editfile (in whatnowsbr.c),
1133 that controls whether editfile should remember the last
1134 program that was exec'ed. This way the whatnow command
1135 "mime", will not be re-executed if "edit" is later given
1138 * Changed whatnowsbr.c, so that whatnow doesn't abort if
1139 mhbuild returns an error.
1141 * Added parameter to sendsbr(), so you may specify whether to
1142 rename the draft file.
1144 * Pass delay time to splitmsg() as a parameter, rather than
1145 use a global variable.
1147 * Moved code to rename draft file after sending message from
1148 splitmsg and sendaux, to sendsbr.
1150 * Removed all the code in viamail to split messages and then
1151 mail them. Replaced this with the standard sendsbr.c routines.
1153 * Changed sendsbr(), so that when splitting messages into
1154 messages of type "message/partial", the header fields that
1155 are copied are more compliant with RFC-2046.
1157 * Fixed mhbuild to track temporary files better. They are
1158 now correctly removed when mhbuild aborts.
1160 * Created a new man page for "sendfiles". The information
1161 about "mhn -viamail" in the "mhn" man page was moved to
1164 * Changed the name of the "viamail" shell script to
1165 "sendfiles". Modified "sendfiles" to use the new
1168 * Moved the functionality for "mhn -viamail" out of mhn,
1169 and into a separate executable called "viamail".
1171 * When storing MIME contents to a folder using mhn -store,
1172 they are now accumulated in a temporary file, and then added
1173 to the folder using folder_addmsg().
1175 * Moved code to save content to a folder from store_content
1176 to new function output_content_folder.
1178 * Moved code to save content to file from store_content to
1179 new function output_content_file.
1181 * Moved code to parse storage format string from store_content
1182 to new function parse_format_string.
1184 * Fix copy_some_headers() in mhstoresbr.c, so that the
1185 correct header fields in the first enclosing message/partial
1186 will be copied (according to RFC2046), when using mhn -store
1187 to reassemble messages of type message/partial.
1189 * Fixed bug to openFTP() in mhparse.c, that caused the
1190 tmp file to not be removed, when transferring a
1191 message/external file from ftp.
1193 * Moved the code in mhparse.c to process -auto switch (scan
1194 contents for the attribute "name"), to a new function
1195 "get_storeproc" in mhstoresbr.c.
1197 * Moved routines to free data structures related to MIME
1198 content from mhparse.c and mhbuildsbr.c, to new file
1201 * Moved code to show/display MIME content into new
1204 * Moved code to store MIME content from into
1205 new file mhstoresbr.c
1207 * Moved code to parse MIME content into new
1210 * Moved code to list information about MIME content
1211 into new file mhlistsbr.c.
1213 * Move part_ok(), type_ok(), content_error(), flush_errors(),
1214 and set_endian() to new file mhmisc.c.
1216 * Start to isolate the code to show, list, and store MIME
1217 messages. One side effect is that only one flag (-show,
1218 -list, or -store) can be used at a time now.
1220 * mhn -store -auto wasn't storing file in correct directory.
1222 * Removed a few dead variables from sbr/ruserpass.c
1224 * move code for creating tmp files, and renaming the
1225 the composition draft in mhbuild, from build_mime()
1228 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
1229 the -[no]auto switch (which isn't used in mhbuild).
1231 * split mhn.c into mhn.c and mhnsbr.c (name later changed
1234 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
1236 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
1238 * Released nmh-0.26.
1240 * Added (unlisted) options [no]dashstuffing to send, post,
1241 and whatnow to determine whether to do RFC934 quoting
1242 (dashstuffing) for encapsulated BCC messages. The default
1243 is still the same (dashstuffing).
1245 * Changed the undocumented feature "nodashmunging" in forw
1246 and mhl, into the documented feature "nodashstuffing". The
1247 default for forw, is still "dashstuffing" for backward
1248 compatibility, although I don't believe that bursting
1249 RFC934 digests is very common anymore.
1251 * Added an option to define REALLYDUMB in the default config.h.
1252 But it is not on by default.
1254 * moved creation of config file mts.conf from zotnet/mts
1255 to etc. This simplified the Makefile in zotnet/mts.
1257 * simplified directory support/general to etc.
1259 * removed unneeded directory support/bboards.
1261 * split getusername() into getusername() and getuserinfo().
1263 * Changed getusr() routine to getusername().
1265 * Slight cleanup in folder_pack.c on code that records the new
1266 number of the "cur" message when packing.
1268 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
1270 * Released nmh-0.25.
1272 * Change install process, so that hard linking the correct mts
1273 library to libmts.a, is not necessary. The final link process
1274 uses the original name of the library.
1276 * Fixed bug in flist.c and folder.c, so that symbolic links which
1277 point to directories, will not decrement the number of directory
1280 * Split the function list_content (in mhn.c and mhbuild.c) into
1281 list_content and list_debug.
1283 * Don't pack (folder -pack) an empty folder.
1285 * Exit gracefully in flist.c, if no sequence is specified,
1286 and no "Unseen-Sequence" is given in nmh profile.
1288 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
1290 * Released nmh-0.24.
1292 * Small clarification to the man page for `ali'.
1294 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
1295 are given, that order doesn't matter.
1297 * Fix bug in seq_list.c when realloc'ing for
1298 large sequence line.
1300 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
1302 * Released nmh-0.23.
1304 * Add new section on "Transfer Encodings" to man page for mhbuild.
1306 * In mhbuild.c, split compose_content into compose_content
1307 (parse and execute composition string), and scan_content (scan
1308 content, decided transfer encoding, check for clash with boundary
1309 string). I did a good amount of rearranging of this code.
1311 * Moved definitions for data structures for parsing MIME
1312 messages from mhn.c and mhbuild.c to a new include
1315 * Small amount of rearranging in sendsbr.c
1317 * Small changes to MAIL.FILTERING file.
1319 * Add the file MAIL.FILTERING to nmh distribution.
1321 * Add line to packf so that if message begins with
1322 "X-Envelope-From:" field, it is converted to "From ".
1324 * Fix packf to add "From " line to beginning of message,
1325 even if Return-Path doesn't exist.
1327 * Add note to MACHINES file that on Linux, configure
1328 doesn't find the functions sigsetjmp/siglongjmp.
1330 * Fix configuration for machines that don't have (or find)
1331 sigsetjmp/siglongjmp.
1333 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
1335 * Released nmh-0.22.
1337 * Add a configure check for sigsetjmp. Add some conditional
1338 #define's in h/signals.h in case it's not found.
1340 * Added additional notes about -auto switch in mhn man page.
1342 * Added note about MM_CHARSET environment variable to
1343 mh-profile(5) man page.
1345 * Fix signal problem in mhn.c (change setjmp/longjmp to
1346 sigsetjmp/siglongjmp).
1348 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
1350 * Released nmh-0.22-pre1.
1352 * Changed the first line in mhl.format from
1353 " -- using template mhl.format -- " to a blank line.
1355 * Added note about automimeproc to mh-profile man page.
1357 * Reorganize the main entry point for parsing a MIME message
1358 or file in mhn. Add new function parse_file() as new main
1359 entry point for parsing MIME files.
1361 * Add note to mhn man page, that "mhn -file -" will accept the
1362 source message on the standard input.
1364 * Changed a sanity check in folder_realloc that was too strict.
1366 * -norfc934mode is now the default for mhbuild,
1367 rather than -rfc934mode.
1369 * Fix mhbuild, so that Content-Description and RFC-822 comments
1370 from #forw directive will be correctly included if there is
1373 * Change mhn to correctly default parts of multipart/digest to
1374 message/rfc822 (leftover code from rfc934mode was removed).
1376 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1379 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1381 * Released nmh-0.21.
1383 * If the file given to mhbuild is "-", then accept the draft on
1384 standard input, and output the MIME message to standard output.
1386 * Cleaned up code in mhbuild.c that decides what transfer
1389 * Cleaned up code in mhbuild.c that decides what character set
1390 to use for text contents.
1392 * Removed old hpux specific code from zotnet/tws/lexstring.c
1394 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1396 * Released nmh-0.21-pre2.
1398 * Added the "decode" variable to mhl.format and mhl.header.
1400 * Added new variable "decode" to mhlsbr.c to decode text in
1401 header fields as per RFC-2047.
1403 * Make sure that when decoding RFC-2047 header fields, that any
1404 spaces at the ends of the encoded text are not ignored, but the
1405 spaces between encoded word are.
1407 * Removed #ifdef's for MIME. MIME support is always compiled in.
1409 * scan/inc will now decode both Subject and From lines as
1410 RFC-2047 encoded header fields.
1412 * Added new function write_charset_8bit() to sbr. It returns
1413 the character set to use for 8bit text in composition draft.
1414 Changed mhbuild to use this function.
1416 * Split mhn man page into man pages for mhn and mhbuild.
1418 * mhn -show will only now only use default method for content
1419 of type plain, if it is NOT a part of a multipart/alternative.
1421 * Split mhn -build into mhbuild. Did some code cleanup.
1423 * Added support for %(decode) to fmtdump.c.
1425 * check_charset() now accepts US-ASCII as a subset of any
1426 ISO-8859-X character set.
1428 * Changed the default "showproc" to mhl, instead of the
1431 * When reading file into mhn composition file, only need read
1432 permissions, not write permissions.
1434 * Added own version of strcasecmp to distribution, since
1435 nmh calls it frequently with NULL pointers (ughh).
1437 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1440 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1442 * Released nmh-0.21-pre1.
1444 * If a message is missing charset parameter to text/plain, show
1445 will assume US-ASCII, rather than just calling showmimeproc.
1447 * Change show.c and mshcmds.c to use check_charset to see if text
1448 message contains valid character set.
1450 * Added new scan format file "scan.nomime" to support/general
1451 that doesn't do any RFC-2047 decoding.
1453 * Modified all the scan format files in support/general to do
1454 RFC-2047 decoding of Subject field.
1456 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1457 ignore whitespace between two valid encoded words, but not
1458 between an encoded word and normal text.
1460 * Created new file sbr/check_charset.c. Moved code from
1461 fmt_rfc2047.c to check for valid character set to this file.
1463 * Added format escape %(decode) to decode contents of "str" register
1464 as a RFC-2047 header field.
1466 * The command install-mh now recognizes the switches -version
1469 * Added a new argument to print_help.c to decide whether to
1470 print profile entries (needed for install-mh to prevent weird
1473 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1474 is initialize to max (mp->lowmsg, 1) rather than always 1.
1476 * Changed macros for sequence/attribute manipulation so that
1477 message status array doesn't need to always start at 1.
1479 * Small cleanups in folder_realloc().
1481 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1483 * Released nmh-0.20.
1485 * Added configure option --with-pager=PAGER.
1487 * Added configure option --with-editor=EDITOR.
1489 * Changed the default format file for mhl (mhl.format) to
1490 also ignore (not display) the header fields Content-Type,
1491 Content-Transfer-Encoding, and Content-ID
1493 * Fixed core dump in addrsbr.c when using %(proper) format function
1494 and the To: line was missing.
1496 * Added the file ZSH.COMPLETION to the distribution.
1498 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1500 * Released nmh-0.20-pre2.
1502 * Added new switch -snoop to both `msgchk' and `inc', so you can
1503 watch the POP transaction.
1505 * Changed "replgroupcomps" to check for Mail-Followup-To header
1506 first, and use it if available.
1508 * Changed "replcomps" to check for Mail-Reply-To header
1509 first, and use it if available.
1511 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1513 * Released nmh-0.20-pre1.
1515 * Changed seq_list.c to dynamically enlarge the buffer for
1516 collecting the message ranges in a long sequence line.
1517 This should remove the last hard limit on the size of a
1520 * Changed seq_read.c so that can read long sequence lines.
1521 It will use multiple calls to m_getfld() when m_getfld()
1522 returns the state FLDPLUS.
1524 * Changed brkstring.c to dynamically add more space for pointers
1525 if necessary. This is needed when splitting up large sequence
1528 * Did some small cleanups in seq_save.c.
1530 * Added new switches `-[no]unseen' to rcvstore, to control
1531 whether new messages are added to Unseen-Sequence.
1533 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1535 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1536 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1538 * Changed "replcomps" to not include CC and TO lines so that
1539 that reply message is only directed at the author of the
1540 message to which you are replying.
1542 * Added new switch `-group' to command repl, which causes repl
1543 to use new forms file "replgroupcomps". This is intended for
1544 making group replies.
1546 * Removed #ifdef for ATHENA.
1548 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1550 * Released nmh-0.19.
1552 * Fix repl,forw so that switch `-form file' will not abort
1553 as ambiguious (silly mistake on my part).
1555 * Cleaned up the mhn man page. Added info about a few escapes
1556 for the formatting/display strings that were not documented
1557 (%%, %t). Moved the BNF grammar for the mime composition file,
1558 to the end of the man page.
1560 * Added the options -[no]format to the command repl. The
1561 switch `-format' will filter the message to which you are
1562 replying with the standard message filter "mhl.reply", which
1563 is now included in the distribution. The `-noformat' option
1564 will negate the use of -format or -filter and not include
1565 the message to which you are replying in the draft.
1567 * Did some cleaning and reorganization on many of the man
1570 * Added debugging switch `-debug' to mhparam, which displays
1571 the values of all `procs' (and some other misc configuration
1572 info) that nmh keeps in global variables.
1574 * When using `refile -preserve', if a conflict occurs, then use
1575 the next available number above the message number you wish
1578 * In forw.c, split the code for creating MIME style forwarding
1579 out of copy_draft, and into copy_mime_draft.
1581 * Move routines in mark.c to print sequences, into new
1582 file sbr/seq_print.c
1584 * flist will now update the current folder.
1586 * Added the switches -[no]fast to flist, to replace
1587 -[no]total. The previous switches are still accepted
1588 but now undocumented.
1590 * More reorganization in flist of the code for
1593 * The command "flist +foo -all" will now scan the folder
1594 "foo" and all its 1st level children.
1596 * Add missing include file <h/mh.h> to sbr/snprintf.c
1598 * Fix alarm bug in rcvtty, so that when it calls external
1599 process, the alarm is never longer than 30 minutes.
1601 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1603 * Released nmh-0.18.
1605 * Fixed bug in mark, so that "mark -list -seq foo" will
1606 correctly indicate if "foo" is a private sequence. I found
1607 this bug mentioned in Jerry Peek's book.
1609 * Simplified the code in seq_setcur(), since seq_addmsg() now
1610 retains the public/private status of sequences.
1612 * Changed sequence handling so that if the switches -public
1613 or -nopublic, are not specified for the commands mark, pick,
1614 or rcvstore, then existing sequences will retain their
1615 previous public/private status.
1617 * mhparam now handles the mh-sequences profile entry
1620 * flist -all will now also check readonly folders (for
1623 * Improve the leaf optimization for folder command.
1624 It will now track the number of directories in a folder,
1625 and stop stat'ing files once it has hit all the subfolders.
1627 * Renamed m_getfolder to getfolder. Changed getfolder to
1628 take option to determine whether it should get current
1629 folder, or just default folder (Inbox). Changed rcvstore,
1630 inc, and rmf to use the new getfolder.
1632 * flist now indicates if a sequence is private.
1634 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1635 wait for stopped processes.
1637 * conflict will dynamically allocate space for group names,
1638 so it can now handle system with more than 100 groups.
1640 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1642 * Released nmh-0.18-pre4.
1644 * Check if we have enough message status space, before we
1645 call folder_realloc() in burst, mhpath, and m_draft().
1647 * mhn will now correctly identify a formatting string of "-"
1648 for the option -store, and send content to stdout.
1650 * Change the way that memory for message status is
1651 allocated. It is dynamcially allocated separately from
1652 the folder/message structure. This required changing
1653 folder_read.c, folder_realloc.c, folder_free.c.
1655 * Removed all the MTR code (experimental code for message
1658 * Renamed m_readfolder.c to folder_read.c and simplified
1661 * Renamed m_freefolder.c to folder_free.c.
1663 * Add function trim() to slocal.c to pretty print
1664 the debugging output.
1666 * Changed the name of m_packfolder() to folder_pack().
1667 Changed the name of m_remsg() to folder_realloc().
1669 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1671 * Released nmh-0.18-pre3.
1673 * Changed installation to add `flists' which is hard linked
1674 to `flist'. This is a equivalent to `flist -all'.
1676 * For flist, -showzero is on by default.
1678 * Major changes to flist. Default is now for flist to search
1679 current folder. The switch `-all' is now used to specify
1680 searching all top level folders. The new switch `-showzero'
1681 is used to print out folders that don't contain any messages
1682 in the given sequence.
1684 * Split BuildFolderList in flist.c into 2 functions
1685 (BuildFolderList, BuildFolderListR). Changed these functions
1686 so that flist now does better leaf optimization, and will stop
1687 stat'ing directory entries when it knows it has hit all the
1688 subdirectories of a given directory.
1690 * Reorganized code in folder.c, so that all relevant folders
1691 are scanned first and information recorded. Then all the
1692 folder summaries at printed out at one time.
1694 * Made the options of folder(s) more orthogonal. Now
1695 "folder -all -noheader -nototal" will do the right thing.
1697 * Added `-noall' switch to folder, for completeness.
1699 * Changed the default mode for creation of new folders
1702 * Slightly changed the format for flist. It now indicates
1703 if a folder is current. Also the width of the various
1704 fields are now calculated at runtime.
1706 * Changed the format for folder(s). Folder names
1707 are now left justified. The width of the various fields
1708 are calculated at runtime.
1710 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1712 * Released nmh-0.18-pre2.
1714 * Add paragraph to man page for install-mh and to INSTALL file
1715 about checking for global mh.profile.
1717 * Renamed m_find() to context_find().
1718 Renamed m_replace() to context_replace().
1719 Renamed m_delete() to context_del().
1720 Renamed m_update() to context_save().
1721 Renamed m_getdefs() to context_read().
1722 Renamed m_foil() to context_foil().
1724 * Change rcvstore to use routine folder_addmsg(), instead of
1725 adding message to folder itself.
1727 * Changed refile, so that if the switch -preserve is used,
1728 and a conflict occurs for a particular folder, then folder_addmsg()
1729 will just use next highest available number for that folder,
1732 * Make folder_addmsg() more robust. It will make repeated
1733 attempts to link file into folder if link returns with
1736 * Fix bug, so that that if forking sendmail, HELO will be sent
1737 unless clientname: option is defined but empty (so now it
1738 is the same as the direct smtp code).
1740 * Changed sprintb to snprintb (now we pass the buffer length
1741 to new routine). Changed code to use new function.
1743 * Added snprintf to sbr. Added configure check to build it
1744 if you don't have a native version (but haven't changed much
1745 code to use it yet).
1747 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1749 * Released nmh-0.18-pre1.
1751 * Fixed alarm bug in slocal, so that alarm is never
1752 called with a value larger than 30 mintues.
1754 * Fixed race condition in rmm and refile, so that
1755 context is updated before external rmmproc is called.
1757 * Removed all the OVERHEAD code.
1759 * Move code to add message to folder from refile.c
1762 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1764 * Did some rearranging of the internals of inc.c.
1766 * Make -inplace the default for anno, forw, dist, and repl.
1768 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1770 * Created new directory mts/sendmail for direct sendmail
1771 interface (although it currently still uses SMTP).
1773 * Removed all the TMA (trusted mail agent) code
1775 * Removed all the TTYD (terminal access daemon) code
1777 * Removed all the MF (uucp filtering) code.
1779 * Removed all the code for BERK.
1781 * Removed all the code for stand-alone delivery (MHMTS).
1783 * Split the file mts/sendmail/smail.c into sendmail.c and
1784 smtp.c. Changed the name of the directory to mts/smtp.
1786 * Changed autoconf to use @sysconfdir@ for location of
1787 configuration files.
1789 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1791 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1793 * Released nmh-0.17.
1795 * MAKEDEFS weren't passed down to recursive makes correctly.
1797 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1798 of hard-coding "/etc/utmp".
1800 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1803 * Remove configure checks for ulong and ushort. Changed
1804 code to just use unsigned {short, long}.
1806 * Change addmsg function in refile.c to return new
1807 number of refiled message.
1809 * Added check in get_returnpath for empty unixbuf.
1811 * Cleanup of sbr/pidstatus to use more POSIX macros
1812 for return value of wait().
1814 * Change configure to also check /bin for "more".
1816 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1818 * Released nmh-0.16.
1820 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1822 * Added automimeproc, which should replace automhnproc.
1824 * multipart messages will no longer abort for messages
1825 of type 8bit or binary (although we still can't really
1826 deal with binary messages, yet).
1828 * Fix double free of c_storage. From John MacMillan.
1830 * mhn now treats unknown subtypes of "text" as text/plain.
1832 * mhn changed so that specifying mhn-show-multipart, or
1833 mhn-show-multipart/{mixed, alternate, etc...) will override
1834 the use of the internal method for displaying these types.
1835 Previously mhn would always use the internal method for subtypes
1836 mixed, alternate, digest, and parallel (even if an alternate
1837 method was specified in mhn.defaults).
1839 * mhn show treats unknown subtypes of multipart, as type
1840 multipart/mixed (as specified RFC2046).
1842 * mhn checks for the parameter "name" rather than "x-name".
1843 From MH-6.8.4 patch.
1845 * Fix double free of ctinfo in user_content when using
1846 #forw with single message. From John MacMillan (and
1849 * Changed -mhnproc switch for show, to -showmimeproc.
1851 * Changed profile entry "mhnproc" to "showmimeproc".
1853 * Added "mime" option to "whatnow", which calls the program
1854 "buildmimeproc" (default is mhn -build) to process MIME
1857 * Added -build switch to mhn, to process MIME composition
1860 * Did some reorganizing of mhn.c.
1862 * Changed casting in mts/sendmail/smail.c from (char) to
1863 (signed char) so SMTP reply codes work correctly for machines
1864 which used unsigned chars by default.
1866 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1868 * Released nmh-0.15.
1870 * Added new form "scan.unseen" to distribution. It marks messages
1871 which are in any sequence in Unseen-Sequence.
1873 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1875 * Fix sign extension bugs in fmt_scan.c.
1877 * Fix m_atoi.c so that strings ending in non-digit characters
1880 * Split code in burst.c so that finding delimiters of digested
1881 messages and bursting a message into multiple messages are
1882 two separate functions (find_delim and burst).
1884 * Add workaround fo AC_PATH_PROG in configure.in, so
1885 that BSD4.4 machines can find sendmail, vi, more.
1887 * Added "-width" option to rcvtty.
1889 * Change a few variable names in zotnet/mts/client.c since
1890 they conflict with defines on AIX.
1892 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1893 unsuccessful if resulting file is less than 500 lines long
1894 (rather than 10, which was previous value), since AIX
1895 sed gives mangled file of about 200 lines.
1897 * Extract code in rcvstore.c to link message into folder,
1898 and put in own subroutine.
1900 * Extract code in refile.c to link message into folder,
1901 and put in own subroutine.
1903 * Moved code to remove messages from folder into own
1904 routine "folder_delmsgs" in sbr. Changed rmm.c and
1905 refile.c to use new routine.
1907 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1909 * Renamed m_seqok to seq_nameok.
1911 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1914 * Changed m_seqflag to return the number of a sequence rather
1915 than its bit flag. Changed its name to seq_getnum and renamed
1916 file to sbr/seq_getnum.c.
1918 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1921 * Added zero switch to m_seqadd function to zero out bits before
1922 adding message to sequence.
1924 * Renamed function m_setvis to m_setunseen, and renamed
1925 corresponding file in sbr.
1927 * Renamed function m_setseq to m_setprev, and renamed corresponding
1930 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1932 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1933 all selected messages from a sequence.
1935 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1936 selected messages to a sequence.
1938 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1941 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1943 * Renamed function pack_folder to m_packfolder, and moved it
1944 from uip/folder.c into its own file sbr/m_packfolder.c
1946 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1948 * Changed function m_gmsg to m_readfolder. Renamed file
1949 sbr/m_gmsg.c to sbr/m_readfolder.c.
1951 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1953 * Expanded rcvtty man page, and added small patch from
1954 MH-6.8.4 distribution.
1956 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1958 * Released nmh-0.14.
1960 * Comment out configure test and code for tgetent to allocate its
1961 own termcap buffer when passed a NULL argument.
1963 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1965 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1966 to show. Restructured code to handle options to various
1967 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1968 environment variable.
1970 * Added new man page `mh-draft' which documents the
1971 draft folder facility in nmh.
1973 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1976 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1977 fmtcompile.c to fmt_compile.c, and formataddr.c to
1980 * `send -help' wasn't showing the -(no)mime and -split
1983 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1985 * Released nmh-0.13.
1987 * Changed mhpath so it doesn't abort if a message sequence
1988 such as "mhpath all" expands to more than 1000 messages.
1989 Also mhpath now dynamically reallocated space for message
1990 names (The number of command line arguments is still limited
1993 * Did some general restructuring of the code in folder.c
1994 that checks for folder information, and prints it.
1996 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1998 * Changed `folder' to reallocate space for folder names if
1999 necessary. So `folders' can now handle more than 300 folders.
2001 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
2003 * Change configure to use a compile check to see if the tm struct
2004 has tm_gmtoff, rather than using egrep.
2006 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
2008 * Released nmh-0.12.
2010 * Had set_exists and unset_exists macros backwards.
2012 * Released nmh-0.11.
2014 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
2016 * Added documentation to mh-profile.man about the various
2017 `procs' (mhlproc, showproc, lproc, etc...).
2019 * Replace the bit twiddling for SELECTED, UNSEEN, and
2020 mp->attrstats with macros.
2022 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
2025 * Change fstat to stat in m_gmsg.c since Linux wants
2028 * Merge Linux patch sent in by Michel Oosterhof (original
2029 patch from bsa@kf8nh.wariat.org).
2031 * Document an undocumented MH feature. mhn -form mhl.null
2032 will suppress the display of the message header.
2034 * mhparam will now return "mhparam etcdir".
2036 * Add catproc to /config/config.c and use that in show.c
2037 and mshcmds.c, rather than hard coding in /bin/cat.
2039 * Add mhnproc to the list of `procs' in mh-profile.man.
2041 * Add configure test for lorder and tsort commands.
2043 * Commented out the padding in the `msgs` struct in h/mh.h
2045 * Change m_gmsg.c to allocate elements to the `info' array by
2046 500 elements at a time (rather than MAXFOLDERS / 5).
2048 * Add note to man page for mhmail that zero length messages are
2049 not sent. Need to use -body "" to send empty messages.
2051 * zotnet/mts/mts.c : compare character with '\0', not NULL.
2053 * sbr/getcpy.c : assign '\0' to character, not NULL.
2055 * add m_fmsg to most programs in uip so that they explicitly free
2056 folder/message structure when done with folder.
2058 * uip/slocal.c : cleanup processing of sender. Make sure it is
2059 defined even if message is missing "From " line.
2061 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
2063 * Released nmh-0.10.
2065 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
2067 * Add configure check for <locale.h>. Turn on LOCALE support
2070 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
2072 * Reversed previous decision to retain "From " lines in slocal.
2073 The "From " line is now removed from all messages.
2075 * inc now saves the date from the "From " envelope in the
2076 Delivery-Date header for all messages.
2078 * sbr/m_getfld.c: Clean up processing of Return-Path and
2079 Delivery-Date from the "From " envelope.
2081 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
2083 * client.c: cast iaddr to int before comparing return value
2084 of inet_addr with NOTOK.
2086 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
2088 * Grep test for signal names was failing on some OS'es because
2089 of missing tabs in regex.
2091 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
2093 * Released nmh-0.09.
2095 * Move config files and format files to *.old before installing.
2097 * Add configure check for killpg.
2099 * msh.c: include <termios.h> instead of <termio.h> and
2102 * prompter.c: don't include <sys/ioctl.h> anymore.
2104 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
2106 * Added `-mime' and `-nomime' options to `repl'.
2109 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
2111 * ruserpass.c : removed conflicting prototypes.
2113 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
2114 by `mesg' command. Previously only worked on BSD machines.
2116 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
2118 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
2119 than hard coded "/etc/utmp".
2121 * Released nmh-0.08.
2123 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
2124 when accessing ndbm/db file for duplicate suppression, instead of
2125 locking database itself.
2127 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
2129 * Added slocal action `mmdf' to deliver to a file in mmdf format.
2131 * Changed the slocal actions `file' and `>' to always deliver in
2132 mbox (uucp) format rather than be determined by RPATHS config
2135 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
2136 rather than mmdf format.
2138 * slocal now adds Delivery-Date field to all messages (previously it
2139 only added it to messages when delivering them to a file). The
2140 "From " line is now retained on all messages if compiling with
2141 RPATHS, rather than being discarded.
2143 * rcvpack no longer adds the Delivery-Date field to messages.
2145 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
2147 * Removed the script packmbox, since it's functionality has been
2150 * Changed packf so that it uses mbox (uucp) format by default
2151 rather than mmdf format. Added options -mbox and -mmdf to
2152 packf so you can choose the preferred format.
2154 * Changed rcvpack so that it uses mbox (uucp) format by default
2155 rather than mmdf format. Added options -mbox and -mmdf to
2156 rcvpack so you can choose the preferred format.
2158 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
2160 * Changed nmh to use dot locking by default (although you
2161 can still easily change this in config.h).
2163 * Simplified locking code. Removed code allowing setting of
2164 locking type in mts.conf. Now the locking type and locking
2165 directory (if any) can only be set at compile time.
2167 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
2169 * Prefer getting timezone information from tm->gmtoff rather
2170 than tzset and external timezone variable.
2172 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
2174 * Fixed typo in ruserpass.c in the variable toktabs.
2176 * When ruserpass was added to LIBOBJS, it was missing
2179 * Released nmh-0.07.
2181 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
2183 * Add check to configure, so that if ruserpass, or _ruserpass
2184 is not found, build version of ruserpass in sbr.
2186 * Added define's to discard.c, m_getfld.c, and scansbr.c so
2187 the code that manipulates internals of stdio, will build
2190 * Added #define to control whether to compile the simple
2191 built-in FTP client in mhn.
2193 * Added configure check for ushort and ulong. Change code
2194 to use ushort/ulong rather than u_short/u_long.
2196 * A couple of small cleanups in locking code.
2198 * Added configure check for gmtoff element in struct tm.
2200 * Added configure check for tzset.
2202 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
2204 * Released nmh-0.06.
2206 * Removed code for machines that don't have socket
2207 interface (how could they get mail anyway?).
2209 * Removed code for BSD41 machines. I don't think there are
2210 many such machines around anymore.
2212 * Add configure check for function uname, and prefer it
2213 over gethostname. General cleanup of zotnet/mts/mts.c.
2215 * Change all `lseek' calls to use POSIX symbolic constants
2216 SEEK_SET, SEEK_CUR, SEEK_END.
2218 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
2220 * Check lex generated file in zotnet/tws and use
2221 pre-generated version if necessary.
2223 * Released nmh-0.05.
2225 * Change to use reliable signals on all platforms that have
2226 sigaction. Change so that interrupted system calls are
2227 restarted for all signals except SIGALRM. This fixes alarm
2228 handling code in smail.c for BSD based systems.
2230 * Added lorder and tsort commands so that created libs can
2231 be linked in one pass.
2233 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
2235 * Changed pidwait so that while it is waiting for a child,
2236 it should block signals rather than ignore them.
2238 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
2240 * Add checks to configure for dbm_open and -lndbm.
2242 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
2244 * folder -pop and folder -push were freeing some memory too
2245 quickly, which caused the entry popped from the stack to not
2246 become the current folder.
2248 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
2250 * Released nmh-0.04.
2252 * Define ospeed and PC in termsbr.c is OS doesn't have
2255 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
2257 * editfile will create a symbolic link to the altmsg if it
2258 can't make a link, on any machine supporting lstat. Formerly
2259 this would happen only on BSD42 based machines.
2261 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
2263 * traverse (in popsbr.c) wasn't calling va_start before using
2264 variable argument list. Fixes core dump in inc when using POP.
2266 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
2268 * The variable pass in remotemail needed to be set to
2269 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
2272 * inc and msgchk were using -rpop by default when configured
2273 with POP support. Default is now -norpop.
2275 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
2277 * By default, post will now give the SMTP HELO command with
2278 the local hostname. If you specify a hostname with the
2279 clientname: option in mts.conf file, post will give the
2280 HELO command with that name instead. If the argument to the
2281 clientname: option is empty, no HELO command is given.
2282 (From the MH-6.8.4 diff)
2284 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
2286 * When using `-help' for a command, it will also print its
2287 profile compents from .mh_profile. (From MH-6.8.4 diff)
2289 * "slocal -file" will now correctly takes its input from
2290 a file (currently need to specify full path).
2292 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
2294 * "slocal -debug" will now issue a warning if a non-blank
2295 line in the .maildelivery file has less than 5 fields.
2297 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
2299 * Changed slocal so that code for duplicate suppression
2300 (MH config was MSGID) is always built. Added the options
2301 -[no]suppressdup to slocal to turn this on/off.
2303 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
2305 * Released nmh-0.03.
2307 * Fixed problem where mark would core dump if no
2308 .mh_sequence file existed.
2310 * Fixed problem where slocal would core dump if -debug
2311 option was given, and certain headers were missing.
2313 * Added patch to slocal to add `folder' (+) action, which
2314 is shorthand for piping message to rcvstore. Updated
2317 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
2319 * Changed flist option -unseen to -[no]all. Cleaned up
2322 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
2324 * Fixed flist. Changed the profile component `Folder-Order'
2325 to `Flist-Order. Added option `-sequence' to flist, so
2326 you can specify the name of the sequence to search for.
2328 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
2330 * A few minor portability cleanups. Changed to use PATH_MAX
2331 rather than MAXPATHLEN. Don't assume ospeed variable exists
2332 in termsbr.c. Removed some conflicting prototypes.
2334 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
2336 * Add configure test to check if tgetent will accept NULL
2337 and allocate its own buffer. Borrowed from zsh.
2339 * Changed libpath to etcpath.
2341 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
2343 * Cleaned up source code and Makefiles, so that if your `make'
2344 supports the VPATH option, you can build nmh in a different
2345 directory from where the source code is located.
2347 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
2349 * Released nmh-0.02.
2351 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
2353 * Split mhook man page into man pages for rcvdist, rcvpack,
2356 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
2358 * Changed code to use strerror, rather than using sys_errlist
2359 and sys_nerr directly.
2361 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
2363 * -compat switch from install-mh removed.
2365 * Changed the default POP port from "pop" to "pop3".
2367 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2369 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2370 (again) to mhn.defaults.sh. Changed find_program (again) to
2371 mhn.find.sh. mhn.defaults.sh now takes the search path
2372 as an argument. Default search path is now specified in Makefile
2373 rather than in script.
2375 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2377 * Changed mtstailor file to mts.conf. Updated man pages.
2379 * Changed si_value to si_val in mhn.c, since it conflicts with
2380 macro defined on Solaris.
2382 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2384 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2385 support for Emacs front-end mhe. It is on by default.
2387 * Added the following configure options: --enable-nmh-pop to
2388 enable client side pop support, --enable-nmh-smtp to enable
2389 SMTP support. Client-side pop support now compiles. Man
2390 pages for inc, msgchk, mh-chart now correctly added pop
2393 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2395 * Added configure test for bug in C libraries where linker
2396 can't find ruserpass, but can find _ruserpass.
2398 * Fixed configure test so that termcap variable ospeed is
2401 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2403 * Source files converted to ANSI C.
2405 * md5 now compiled separately rather than being included
2406 in mhn.c. Changed md5 to use memset and memcpy.
2408 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2410 * Collected the error routines adios, advise, admonish, and advertise
2411 into one file (error.c), and did some rearranging of the code.
2413 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2415 * Added awk script sigmsg.awk (originally written by
2416 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2417 automatically generate signal messages for pidstatus.c.
2418 Added files sbr/signals.c, h/signals.h. Code now uses
2419 sigprocmask to block signals (if available). Code now uses
2420 signal blocking on non-BSD machines.
2422 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2424 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2426 * Released nmh-0.01.
2428 * Added configure code to check for type of signals functions
2429 you have (POSIX or BSD style signals). Added function
2430 SIGPROCMASK to simulate sigprocmask on machines that don't
2433 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2435 * Added -version switch to all commands. Also added to
2438 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2440 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2441 POSIX termios.h style functions if present.
2443 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2445 * Changed support/general/bootmhn.sh to output new mhn_defaults
2446 file to standard output by default (makes it easier for testing).
2447 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2448 script to find_program.
2450 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2452 * Added patch to uip/folder.c from exmh distribution to
2453 speed up -recurse option.
2455 * Added flist command from exmh distribution. It doesn't work
2456 yet, but it compiles :-)
2458 * Changed default location for install to
2459 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2460 and configuration files go in nmh/etc, and support binaries go
2461 in nmh/lib. Of course, all this can now be changed in the top
2464 * Started with mh-6.8.3 as based and converted to autoconf.
2465 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2466 Pop support and plenty of other things, are now broken.
projects / nmh / blob