diplodocus.org Git - nmh/blob - acconfig.h

   1
   2 /****** BEGIN USER CONFIGURATION SECTION *****/
   3
   4 /*
   5  * IMPORTANT: You should no longer need to edit this file to handle
   6  * your operating system. That should be handled and set correctly by
   7  * configure now.
   8  *
   9  * These are slowly being phased out, but currently
  10  * not everyone is auto-configured.  Then decide if you
  11  * wish to change the features that are compiled into nmh.
  12  */
  13
  14 /*
  15  * Turn on locale (setlocale) support
  16  */
  17 #define LOCALE  1
  18
  19 /*
  20  * Define to 1 the type of file locking to use.  You need to
  21  * make sure the type of locking you use is compatible with
  22  * other programs which may modify your maildrops.
  23  * Currently you can only use one type.
  24  */
  25 #define DOT_LOCKING   1
  26 /* #define FCNTL_LOCKING 1 */
  27 /* #define LOCKF_LOCKING 1 */
  28 /* #define FLOCK_LOCKING 1 */
  29
  30 /*
  31  * If you have defined DOT_LOCKING, then the default is to
  32  * place the lock files in the same directory as the file that
  33  * is to be locked.  Alternately, if you define LOCKDIR, you
  34  * can specify that all lock files go in a specific directory.
  35  * Don't define this unless you know you need it.
  36  */
  37 /* #define LOCKDIR "/usr/spool/locks" */
  38
  39 /*
  40  * Define this if your passwords are stored in some type of
  41  * distributed name service, such as NIS, or NIS+.
  42  */
  43 #define DBMPWD  1
  44
  45 /*
  46  * Directs nmh not to try and rewrite addresses
  47  * to their official form.  You probably don't
  48  * want to change this without good reason.
  49  */
  50 #define DUMB    1
  51
  52 /*
  53  * Define this if you do not want nmh to attach the local hostname
  54  * to local addresses.  You must also define DUMB.  You probably
  55  * dont' need this unless you are behind a firewall.
  56  */
  57 /* #define REALLYDUMB  1 */
  58
  59 /*
  60  * Directs inc/slocal to extract the envelope sender from "From "
  61  * line.  If inc/slocal is saving message to folder, then this
  62  * sender information is then used to create a Return-Path
  63  * header which is then added to the message.
  64  */
  65 #define RPATHS  1
  66
  67 /*
  68  * If defined, slocal will use `mbox' format when saving to
  69  * your standard mail spool.  If not defined, it will use
  70  * mmdf format.
  71  */
  72 #define SLOCAL_MBOX  1
  73
  74 /*
  75  * If this is defined, nmh will recognize the ~ construct.
  76  */
  77 #define MHRC    1
  78
  79 /*
  80  * Compile simple ftp client into mhn.  This will be used by mhn
  81  * for ftp access unless you have specified another access method
  82  * in your .mh_profile or mhn.defaults.  Use the "mhn-access-ftp"
  83  * profile entry to override this.  Check mhn(1) man page for
  84  * details.
  85  */
  86 #define BUILTIN_FTP 1
  87
  88 /*
  89  * If you enable POP support, this is the the port name
  90  * that nmh will use.  Make sure this is defined in your
  91  * /etc/services file (or its NIS/NIS+ equivalent).  If you
  92  * are using KPOP, you will probably need to change this
  93  * to "kpop".
  94  */
  95 #define POPSERVICE "pop3"
  96
  97 /*
  98  * Define the default creation modes for folders and messages.
  99  */
 100 #define DEFAULT_FOLDER_MODE "0700"
 101 #define DEFAULT_MESSAGE_MODE "0600"
 102
 103 /*
 104  * The prefix which is prepended to the name of messages when they
 105  * are "removed" by rmm.  This should typically be `,' or `#'
 106  */
 107 #define BACKUP_PREFIX ","
 108
 109 /*
 110  * Name of link to file to which you are replying.
 111  */
 112 #define LINK "@"
 113
 114 /*
 115  * If wait/waitpid returns an int (no union wait).
 116  */
 117 #define WAITINT 1
 118
 119 /***** END USER CONFIGURATION SECTION *****/
 120 @TOP@
 121
 122 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX, SCO5 */
 123 #undef SYS5
 124
 125 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX */
 126 #undef SVR4
 127
 128 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS -- does
 129  * PicoBSD have uname? :) */
 130 #undef BIND
 131 #undef BSD42
 132
 133 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS */
 134 #undef BSD44
 135
 136 /* Defined for SCO5 */
 137 #undef SCO_5_STDIO
 138
 139 /* Defined for Linux */
 140 #undef LINUX_STDIO
 141
 142
 143 /*
 144  * Define this if you want SMTP (simple mail transport protocol)
 145  * support.  When sending mail, instead of passing the message to
 146  * the mail transport agent (typically sendmail), nmh will open a
 147  * socket connection to the mail port on the machine specified in
 148  * the `mts.conf' file (default is localhost), and speak SMTP directly.
 149  */
 150 #undef SMTPMTS
 151
 152 /*
 153  * Use sendmail as transport agent.  Post messages by piping
 154  * them directly to sendmail.
 155  */
 156 #undef SENDMTS
 157
 158 /*
 159  * Define this to compile client-side support for pop into
 160  * inc and msgchk.  Do not change this value manually.  You
 161  * must run configure with the '--enable-nmh-pop' option
 162  * to correctly build the pop client support.
 163  */
 164 #undef POP
 165
 166 /*
 167  * Define this to compile client-side support for kpop
 168  * (kerberized pop) into inc and msgchk.  Do not change this
 169  * value manually.  You must run configure with the option
 170  * '--with-krb4=PREFIX' to correctly build the kpop client support.
 171  */
 172 #undef KPOP
 173
 174 /*
 175  * Define this to "pop" when using Kerberos V4
 176  */
 177 #undef KPOP_PRINCIPAL
 178
 179 /*
 180  * Define this to compile support for using Hesiod to locate
 181  * pop servers into inc and msgchk.  Do not change this value
 182  * manually.  You must run configure with the option
 183  * '--with-hesiod=PREFIX' to correctly build Hesiod support.
 184  */
 185 #undef HESIOD
 186
 187 /*
 188  * Compile in support for the Emacs front-end mh-e.
 189  */
 190 #undef MHE
 191
 192 /* Define to 1 if your termcap library has the ospeed variable */
 193 #undef HAVE_OSPEED
 194 /* Define to 1 if you have ospeed, but it is not defined in termcap.h */
 195 #undef MUST_DEFINE_OSPEED
 196
 197 /* Define to 1 if tgetent() accepts NULL as a buffer */
 198 #undef TGETENT_ACCEPTS_NULL
 199
 200 /* Define to 1 if you have reliable signals */
 201 #undef RELIABLE_SIGNALS
 202
 203 /* Define to 1 if you use POSIX style signal handling */
 204 #undef POSIX_SIGNALS
 205
 206 /* Define to 1 if you use BSD style signal handling (and can block signals) */
 207 #undef BSD_SIGNALS
 208
 209 /* Define to 1 if you use SYS style signal handling (and can block signals) */
 210 #undef SYSV_SIGNALS
 211
 212 /* Define to 1 if you have no signal blocking at all (bummer) */
 213 #undef NO_SIGNAL_BLOCKING
 214
 215 /* Define to `unsigned int' if <sys/types.h> or <signal.h> doesn't define */
 216 #undef sigset_t
 217
 218 /*
 219  * Define to 1 if your vi has ATT bug, such that it returns
 220  * non-zero exit codes on `pseudo-errors'.
 221  */
 222 #undef ATTVIBUG
 223
 224 /*
 225  * Define to 1 if you need to make `inc' set-group-id because your mail spool is
 226  * not world writable.  There are no guarantees as to the safety of doing this,
 227  * but this #define will add some extra security checks.
 228  */
 229 #undef MAILGROUP
 230
 231 /* Define ruserpass as _ruserpass if your libraries have a bug *
 232  * such that it can't find ruserpass, but can find _ruserpass. */
 233 #undef ruserpass
 234
 235 /* Define if your system defines TIOCGWINSZ in sys/ioctl.h.  */
 236 #undef GWINSZ_IN_SYS_IOCTL
 237
 238 /* Define if your system defines `struct winsize' in sys/ptem.h.  */
 239 #undef WINSIZE_IN_PTEM
 240
 241 /* Define to 1 if struct tm has gmtoff */
 242 #undef HAVE_TM_GMTOFF
 243
 244 /* Define if your system has sigsetjmp */
 245 #undef HAVE_SIGSETJMP
 246
 247 /* Define if your system has mkstemp */
 248 #undef HAVE_MKSTEMP