1 Mon Dec 11 22:08:07 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
3 * When Shantonu made the new libmts.a, he swapped $(MTSLIB) and
4 libmh.a in sbr/Makefile.in so that libmh.a comes first, but this
5 causes the build to fail on Solaris, because libmts.a has to get
6 ruserpass() out of libmh.a. Swapping them back to the way Ken
7 Hornstein's patch (which I applied on Jul 20) put them, with
8 libmh.a correctly coming second. If there are times when libmts.a
9 needs to come second, then it would appear there's a circular
10 dependency and someone (Shantonu?) did an mts merge incorrectly.
12 Fri Sep 8 01:36:23 2000 Shantonu Sen <ssen@mit.edu>
14 * Took out bad time textual time zones like BST and JST.
15 I found them online somewhere, but am not sure if they're
18 Fri Sep 8 00:36:48 2000 Shantonu Sen <ssen@mit.edu>
20 * Moved zotnet/mts to mts/generic. This code reorganization
21 makes the entire zotnet tree deprecated -- bboards is unneeded,
22 mf was was moved to sbr, tws was rewritten and moved to sbr, and
25 * Created a new static library called libmts.a used during
26 compilation which includes the generic mts code and the
27 smtp/sendmail code. This supercedes the functionality of the
28 old libsmtp.a and the remains of libzot.a.
30 * Updated header includes to reference the new location of mts.h
31 in mts/generic/mts.h. Also, update the configure and top-level
32 Makefile not to descend into zotnet. Also, they don't descend
33 into mts/mmdf and mts/sendmail (the sendmail code has been
34 merged into the smtp code).
36 * Added #include <h/nmh.h> to h/md5.h, since my compile was
37 complaining about implicitly-declared memcpy and memset, which
38 appear to be in strings.h. In any event, nmh.h should take care
41 * When doing a "make nmhdist", notice that the generated
42 snapshot does not include zotnet of the mts directories as noted
43 above. Since they are no longer compiled, and I don't see any
44 obvious code path to get to them, end-users should probably
45 not need them. If you think otherwise, turn Makefile generation
46 back on in configure.in and turn on recursion into those dirs
47 in the appropriate Makefile.in
49 Wed Sep 6 22:40:03 2000 Shantonu Sen <ssen@mit.edu>
51 * Tracked down the problem in the new dtimep where time
52 zones were being radically misreported. It was because the
53 parser knew about military time zones (such as M or E) but in
54 some cases did not know about the textual representation of
55 some zones (like MET). When it encountered one of these, the
56 date parser misread MET as the military time zone T (well, first
57 zone M, then E, and finally T). I took military zones out, and
58 things seem much better. Also, the default behavior of parsing
59 time zones appears to default to GMT in the absence of better
60 info, which is less bogus than assuming the mail came from the
61 current time zone, which was the behavior in 1.04.
63 Thu Aug 10 13:22:13 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
65 * Decided that limiting the message number columns to 3 on my
66 scan.MMDDYY and scan.YYYYMMDD (to try to regain space taken by
67 extra date info) was ill-conceived. It's not that tough to get
68 past 999 messages, though I imagine it's rather rare to exceed
69 9999. Changed these to 4. Also put the "replied / encrypted"
70 column back in YYYYMMDD -- I've never seen it show anything but a
71 space, but that space is useful if you use scan, grep, and awk
72 (with the default field separator) to grab message numbers (I know
73 -- pick should really be used for these purposes...).
75 Mon Aug 7 20:11:09 CEST 2000 Ruud de Rooij <ruud@ruud.org>
77 * Modify umask set by mhshow to enable user execute bit, so that
78 viewers that create temporary directories (e.g., lynx) will be
81 Thu Aug 03 17:14:08 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
83 * TODO: Allow multiple simultaneous differing contexts, probably
84 each tied to a parent (terminal) process.
86 Tue Aug 1 10:48:05 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
88 * Makefile install rules should not look for generated files in
89 the source tree -- this will happen to work when configuring and
90 building inside the source tree but will fail when using an
91 external build tree. Fixed etc/Makefile.in.
93 Mon Jul 24 16:20:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
95 * When Shantonu wrote the new, more portable dtimep.lex, he left
96 out the #ifdef DSTXXX stuff for some reason. Not a good idea, as
97 that code is required for proper printing of numeric-offset
98 timezones that have daylight saving time. Without that code,
99 -0700 during DST gets printed as MST instead of PDT.
101 * Renamed DSTXXX as ADJUST_NUMERIC_ONLY_TZ_OFFSETS_WRT_DST and
102 added an explanatory comment by its #definition.
104 * Updated README.developers with the fact that zotnet/tws is going away.
106 Thu Jul 20 20:30:52 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
108 * Moved Kimmo's new "--with-hash-backup" to be output with the
109 rest of the --with options in the configure --help output. Also,
110 people did not preserve my alphabetization of the --with options
111 when they added new ones. Re-alphabetized.
113 * One more pass at README.developers now that it's clear that my
114 previously-suggested one-line autoconf-file commit can cause
115 unnecessary local makes and an out-of-sync stamp-h.in file, but
116 would not cause problems for other people using the CVS files.
118 * Ken Hornstein's SASL patch was not integrated properly with
119 Ruud's new merged mts/sendmail code. Kimmo has since fixed nmh so
120 it compiles, but according to Ken, the SASL stuff still does not
121 work. Integrating a patch from him for this.
123 * Last pass at README.developers -- Kimmo's 5-step commit was
124 overkill. You only need 3 steps, since configure.in is the only
125 autoconf file with the RCS $Id keyword.
127 * Applied Kurt J. Lidl <lidl@eng.us.uu.net>'s $MAILHOST patch:
129 I have a small patch that would be nice to be included --
130 basically, it allows the usage of the "MAILHOST" environment
131 variable, without having to have HESIOD turned on. I need
132 this functionality for my environment, where we have identical
133 /usr/local on all my machines (so I cannot just hardcode into
134 the mts.conf file), and I have multiple POP mail servers for
137 Modified inc.man to reflect that along with "pophost:" and -host,
138 $MAILHOST can now activate POP mail inclusion as well.
140 * Fixed warnings from diff on first-time install of nmh. Also
141 added 'echo's clarifying the etc file installation activities.
143 Tue Jul 18 19:36:59 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
145 * Added the answer to Dan's question in README.developers.
147 Mon Jul 17 19:10:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
149 * Clarified and made some corrections to Kimmo's README.developers
150 changes (BTW, if anyone can explain why the RCS Ids are able to cause
151 problems with the dependencies, please fill in the explanation --
152 I never encountered a problem with the old single-commit method).
154 Sat Jul 15 23:13:49 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
156 * Add configure option --with-hash-backup so the backup prefix can
157 be easily changed from "," to "#".
159 * Simplified sbr/Makefile.in so that it works with any make.
161 * Use mkstemp in sbr/lock_file.c.
163 * Commits of autoconf-related files apparently can't all be done
164 in one shot due to RCS Ids changing when committing -- updated
167 Tue Jul 11 14:18:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
169 * Clarified post.man and send.man for those not completely up on
170 SASL terminology. "SASL encryption layers are not supported for
171 SMTP" means that encryption is supported for the authentication
172 but not for the subsequent data stream.
174 Sat Jul 8 01:36:19 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
176 * Applied Ken Hornstein <kenh@cmf.nrl.navy.mil>'s patches
177 implementing SASL support for POP3 and SMTP. If nmh is compiled
178 with SASL support, using the -sasl switch on the inc, msgchk,
179 post, and send commands will enable authentication encryption for
180 SMTP, and both authentication and data stream encryption for POP3.
182 Sat Jun 10 18:37:59 CEST 2000 Ruud de Rooij <ruud@ruud.org>
184 * Merged mts/sendmail functionality into mts/smtp; switching between
185 smtp and sendmail delivery method is now controlled by mts.conf.
187 * If tsort cannot deal with loops, in addition to defining tsort as
188 cat, also define lorder as echo.
190 * Removed uip/popi.c from list of sources.
192 Thu Jun 08 19:36:57 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
194 * New dtimep.lex didn't parse day names properly. Fixed. Also
195 clarified ambiguous comments preceding day_map[] array (from old
196 dtimep.lex) that probably led to the erroneous cp++ being added.
198 Wed Jun 7 20:52:33 CEST 2000 Ruud de Rooij <ruud@ruud.org>
200 * Added one more mkstemp invocation to uip/spost.c (which was in a
203 * Applied patch from Peter Maydell to clean up permissions handling
204 and error handling in uip/inc.c.
206 Mon Jun 5 22:10:07 CEST 2000 Ruud de Rooij <ruud@ruud.org>
208 * Use cat instead of tsort if tsort cannot deal with loops in its
209 input (which is the case for tsort from GNU textutils).
211 Mon Jun 5 21:14:36 CEST 2000 Ruud de Rooij <ruud@ruud.org>
213 * If lockfile is present, and its dotlockfile program is setgid,
214 inc does not need to be setgid.
216 Sun Jun 4 21:35:40 CEST 2000 Ruud de Rooij <ruud@ruud.org>
218 * Added autoconf test for Miquel van Smoorenburg's liblockfile
219 library, as found on Debian systems.
221 * Added liblockfile support to sbr/lock_file.c.
223 Wed May 31 7:19:30 2000 Shantonu Sen <ssen@mit.edu>
225 * Fixed up dtimep.lex a bit. Added back memory options for AIX to
226 increase available memory. Took out %option noyywrap, which
227 wasn't understood by AT&T lex, as well as the -i
228 case-insensitivity flag.
230 Wed May 31 07:40:45 2000 Doug Morris <doug@mhost.com>
232 * Added a lint target to the Makefiles and a check in autoconf
233 to determine whether lint or lclint exists on the system.
235 Fri May 30 19:21:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
237 * etc/Makefile.in was incorrectly installing mts.conf.in and
238 sendfiles.in -- fixed. Generated sendfiles script was not a
239 dependency of the `all' target, and was incorrectly included in
240 the distribution. Changed the suffix for the backed-up previous
241 versions of the etc files from the ambiguous .old to .prev. Added
242 call to diff -- only keep the .prev files around if different from
243 the newly-installed versions (intentionally didn't redirect output
244 to /dev/null so you'll notice when your changed versions are
245 getting moved aside).
247 * INSTALL never documented the etc/*.old thing. Documented the
248 new etc/*.prev thing (including a note to watch for diff output).
250 * Applied Alec Wolman <wolman@cs.washington.edu>'s dropsbr.c patch:
252 In the map_write routine, a call is made to map_open and this
253 call is supposed to set the "clear" variable to 0 or 1,
254 depending on whether the map file is empty or not. In
255 mh6.8.3, this worked because map_open would set "clear" by
256 calling the mbx_Xopen routine. In nmh, the code for mbx_Xopen
257 was merged into mbx_open, but the interface for mbx_open
258 doesn't support the clear variable, so that functionality was
259 lost. The map_open interface still contains "int *clear" in
260 the prototype, but never sets it.
262 My patch eliminates "clear" from the map_open interface (I
263 checked to make sure that map_write is the only client of
264 map_open). Furthermore, my patch also sets the "clear"
265 variable properly at the beginning of map_write by calling
266 fstat(). This eliminates the bug in that the value of "clear"
267 being used later in the routine was just stack garbage.
269 Having a bad value of clear causes this next bug to be
270 triggered: The fp file pointer was being opened with fdopen,
271 but in two of the three switch cases it wasn't being closed.
272 In certain cases, this was causing packf to run out of file
273 descriptors if you attempted to pack a large folder.
275 Mon May 29 7:48:15 2000 Shantonu Sen <ssen@mit.edu>
277 * Moved the date parsing routines from zotnet/tws to sbr/ (and
278 tws.h to h/). Updated all source files to reflect to new location
281 * Rewrote dparsetime (in dtimep.lex -> dtimep.c) to replace the
282 old zotnet/tws/dtimep.c, dtimep.lex, lexstring.c, lexedit.c, and
283 dtimep.c-lexed. It should now work with flex (although untested
284 with lex), and requires no sed-ing. For now, I have the lexed
285 version in the distribution, so that end-users don't need to worry
286 about running it through flex/lex. I have not added back support
287 for guessing the time zone when it's not specified.
289 Sun May 28 17:44:15 CEST 2000 Ruud de Rooij <ruud@ruud.org>
291 * Added autoconf check for getutent().
293 * Changed uip/rcvtty.c and uip/slocal.c to use getutent() and
294 friends. Since I can only check on Linux, please check if
295 this works on other systems.
297 Sun May 28 14:58:49 CEST 2000 Ruud de Rooij <ruud@ruud.org>
299 * Applied patch from Peter Maydell to uip/scansbr.c for more
300 checks for write failures.
302 * Unlink temporary file properly in uip/rcvtty.c.
304 * Moved viamail from bindir to libdir.
306 * Changed sendfiles into sendfiles.in, so that path to viamail
309 * Added gzip support to sendfiles.
311 * Added References header to replcomps and replgroupcomps.
313 Sun May 28 14:39:31 CEST 2000 Ruud de Rooij <ruud@ruud.org>
315 * Fixed m_getfld bug which caused segmentation faults when
316 incorporating messages which ended in multiple linefeeds crossing
319 Fri May 26 13:21:59 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
321 * msh has been unable to show MIME messages ever since 1.0. Alec
322 Wolman <wolman@cs.washington.edu> tracked down the problem to the
323 -show flag being passed to mhshow. mhshow is equivalent to the
324 old mhn -show, so we don't need the -show anymore. Removed it.
326 Fri May 12 02:51:21 2000 Shantonu Sen <ssen@mit.edu>
328 * zotnet/bboards is not longer built by default. Goal is to move
329 the assorted functions in zotnet into sbr or some more logical
332 * Moved zotnet/mf to sbr, and changed mf.h references accordingly,
333 as well as Makefiles.
335 Thu May 11 02:21:34 2000 Shantonu Sen <ssen@mit.edu>
337 * Simplified sbr/Makefile.in so that both SRCS and OBJS aren't
338 seperately and redundantly defined, but so that OBJS is a
339 pattern-substituted version of SRCS with suffix .c -> .o. This
340 should make maintainability easier.
342 * Added section to MACHINES indicating what platforms nmh is known
343 to compile and work on, just to give users peace of mind, or
344 something. This is by no means complete or exhaustive, so add
345 whatever you know works.
347 Tue May 09 20:38:04 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
349 * Alphabetized Shantonu's $pop_kinds output on configure's "pop is
350 enabled" line. If POP3 is the only kind of POP enabled, say so,
351 rather than just saying "yes" (which is ambiguous).
353 * Fixed four warnings in Shantonu's new getpass.c. Needed to
354 #include <stdlib.h> for calloc(), <unistd.h> for ttyname(), and
355 "h/mh.h" for adios(). Also changed ch from char to int to get rid
356 of "comparison is always 1 due to limited range of data type" on EOF.
358 * Added steps to README.developers saying to change the version
359 number to X.Y.Z+dev. Did a little rearranging and changed the FTP
360 dir from /home/ftp to /var/ftp to reflect Doug's new machine.
362 * Changed configure.in to use gcc -Wall even without
363 --enable-debug, to prevent developers compiling optimized from
364 introducing warnings, and to give end-users a warm, fuzzy feeling
365 as they (hopefully) see no warnings come out (except perhaps on
366 the lex output file) even with -Wall.
368 * Renamed getpass() to nmh_getpass() since the prototype for
369 getpass() varies from OS to OS, and we want to _always_ use our
370 version of the function. Fixed all the callers to use
371 nmh_getpass() and added it to prototypes.h. Semi-arbitrarily
372 upped MAX_PASSWORD_LEN from 128 to 256. buf was being calloc()'d
373 and the memory leaked -- should have just been declared as static
374 char array. Prepended "Portions of this code are" to the
375 copyright message, as this version has been changed significantly
376 from the BSD version.
378 * Added "nmh-local functions to use in preference to OS versions"
379 section to README.developers (currently just says to use
380 nmh_getpass() instead of system getpass()).
382 * Prepended "Portions of this code are" to the copyright message
385 * Added mts.conf.5 page per Neil W Rickert <rickert+nmh@cs.niu.edu>'s
388 This happens on solaris:
391 windex entry incorrect: mts.conf(5) not found.
392 No manual entry for mts.conf.
396 % echo ".so man5/mh-tailor.5" > mts.conf.5
398 done in the man5 directory. We need to add 'mts.conf.5' as a
399 reference sourcing mh-tailor.5.
401 Mon May 08 23:51:55 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
403 * Doug informed me that the way I had restored the "lost" version
404 histories was wrong, because `cvs checkout's of old versions of
405 nmh wouldn't work properly. It occurs to me that this could be
406 fixed by simply deleting those tags in the new-location *,v files,
407 but oh well. I'm putting everything back to the way Doug
408 originally had it. To get the old version history for a file that
409 used to be in the top directory, you'll need to "blindly" do a
410 `cvs log' there (even though you won't have a local copy of the
411 file in that directory). `cvs diff' will no longer be able to
412 diff pre-move versions vs. post-move versions -- you'll have to do
413 a lot of manual gyrations with `cvs checkout' and then use `diff'.
415 * I had alphabetized the --configure options in the --help output
416 awhile back, but Shantonu added --enable-apop just under
417 --enable-pop. Put it in alphabetical order and clarified what
418 --enable-apop does vs. --enable-pop and --with-krb4. Also changed
419 --with-mts help line from "mail transport agent" to "mail
420 transport agent/service" so the 's' in "mts" doesn't seem to come
423 * Added two steps to "releasing nmh" in README.developers. After
424 making the tarball, it's a good idea to diff the tree vs. the CVS
425 tree to make sure no files got left out, and then to chown the
426 files so that they're owned by root, preventing a Trojaning attack
427 by a malicious remote user with a UID matching yours.
429 * Changed DIFFERENCES to say that RPOP is not currently supported
430 rather than implying it by saying that APOP, KPOP, and POP[3] are.
432 Sun May 07 18:16:43 2000 Shantonu Sen <ssen@mit.edu>
434 * Imported NetBSD version of getpass() and made extensive
435 revisions for compatibility with programs that pipe the password
436 to stdin, such as exmh.
438 * Removed tests for system ruserpass() which sometimes gave
439 phantom positive results. Also, bext to use internal functions if
440 we ever want to change .netrc format to something else, or access
443 Sat May 06 08:28:09 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
445 * Restored lost version histories for those moved files by doing a
446 manual `mv' in the CVSROOT on mhost. CVS badly needs a `cvs mv'
447 command so that you can move files (without having physical access
448 to the CVSROOT) without losing versioning. Put MACHINES back at
449 the top level as it needs to be read before building. Fixed DIST
450 variable in {.,docs}/Makefile.in to reflect that and to add
451 missing entry for "INSTALL" file.
453 Sat May 06 13:13:07 2000 Doug Morris <doug@mhost.com>
455 * Re-cleaned up nmh documentation (by moving things to docs
456 subdir) and modified Makefile & configure.in to handle the change.
458 Mon Apr 17 21:28:40 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
460 * Scott Blachowicz pointed out that the configure --help output
461 for --enable-masquerade was misleading. Clarified.
463 Mon Apr 17 19:01:00 2000 Shantonu Sen <ssen@mit.edu>
465 * APOP support can be compiled in to inc and msgchk using
468 * To access an APOP host, specify -apop on the command line
469 along with any -host or -user option.
471 Fri Apr 14 23:10:44 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
473 * Upped the version number to 1.0.4+dev until the next nmh release.
475 * Added a "releasing nmh" section to README.developers, while the
476 process was fresh in my mind.
478 Fri Apr 14 18:21:34 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
480 * Added new files README.developers, ChangeLog_MH-3_to_MH-6.6, and
481 ChangeLog_MH-6.7.0_to_MH-6.8.4.html to DIST target in Makefile.in.
483 * Released nmh-1.0.4.
485 Tue Apr 11 21:37:03 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
487 * Applied Brian Campbell <bacam@tardis.ed.ac.uk>'s mhn.defaults.sh
490 It appears that there shouldn't be quotes around the %s in the
491 iso-8859-1 charset entry; xterm passes the remaining arguments
492 to the program, quoting them means that xterm thinks they're
493 part of the program's name.
495 This %s isn't the same as the "Insert content subtype" one from
496 mhshow-show-* -- it doesn't come from MIME headers and is safe not
499 Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
501 * added check in fmt_compile() to handle a single-character
502 format string. fmt_compile() depends on having an array of
503 format characters with an empty item at the end. A
504 single-character format would cause programs using this
505 function to segfault because the algorithm used to decide on
506 the length of the array mistakenly created a single-item array
507 when the format string was one character. This eventually
508 caused problems when the program attempted to test item+1
511 Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
513 * Richard Coleman threw out a lot of old MH-specific files in nmh.
514 Much of the stuff, indeed, is not worth saving, but there are
515 nuggets that are very worthwhile, and should probably be added
516 back in. Most important, IMHO, are the MH change logs, as they
517 can help answer questions like "Why is this code like this?" or
518 "How long has this been broken?" or "What was this ever used for?"
520 I've added a new file to the nmh tree called
521 ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
522 mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
523 to go from newest at the top to oldest at the bottom to match the
524 ChangeLog convention. Unfortunately there are no change logs for
525 versions of MH prior to 3 in the MH tar files available at
526 <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
527 are MH-6.6 changes that aren't documented in the logs.
529 I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
530 based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
531 and its "catman"-type output are a pain to deal with, but I was
532 loath to throw away the formatting, so I converted the file to
533 HTML. The only actual markup in the body are the "<B>" and "<U>"
534 tags, and "<" and ">" instead of '<' and '>', so it's quite
535 doable to view the file in plain ASCII mode as well. Note that
536 some of the changes this file documents as having been made in
537 MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
538 and later put in certain 6.8.4 stuff.
540 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
542 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
543 fixing apparent bugs in Dan Winship's new security quoting code:
545 Since upgrading, I've been getting the following errors
546 while attempting to process some MIME messages:
548 (1) Syntax error: Unterminated quoted string
553 (2) line 1/10 (END)Segmentation fault (core dumped)
555 (2) appears to be due to the testing of an unset pointer in
556 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
557 mis-quoting a filename being handed to the shell in
558 mhshowsbr.c:show_content_aux().
560 Resolving the pointer reference issue in
561 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
562 problem in the routine.
564 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
566 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
567 prevent core dumping on packf. Here's the note from his message:
569 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
570 core on a file w/o a From line with a line >= BUFSIZ.
571 I noticed this because I had a junk file in my mail
574 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
576 * wesley.craig@umich.edu did not document his previous KPOP patch,
577 so I did so, and asked him to check what I wrote. Unfortunately
578 he didn't notice my misunderstanding of his patch. I wrote that
579 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
580 exclusively, but if you leave it as "pop3", you can use Wesley's
581 new -kpop switch on a given invocation. Instead, however, -kpop
582 turned out to be necessary on every invocation, and a KPOP user
583 complained. Applied Wesley's new patch, which makes things work
584 like I thought his original patch did. After that, did one more
585 clarifying pass to the documentation in inc.man and msgchk.man.
587 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
589 * When I fixed the long-standing makedir() bugs in January, I had
590 the code call strtoul(..., 0), which I believed to be safe as all
591 modes specified as ASCII constants in the nmh code started with a
592 leading zero (signifying octal), which I did as it would work if
593 internal constants were ever changed to hex. Unfortunately I was
594 unaware of the "Folder-Protect:" .mh_profile entry, which
595 mh-profile.man documents as an octal-only constant, with no
596 leading zero required. I've changed the strtoul() call to an
597 atooi() call and removed the misleading leading zeroes on the
598 ASCII octal constants in the code and man pages. Also changed the
599 "Folder-Protect:" example in the man page to something more
600 interesting than a duplication of the default.
602 * When I added my --enable-masquerade option, you'll note that I
603 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
604 options too wordy and I'm not sure why Richard went that route.
605 I've renamed them to just --enable-*, but the old versions will
606 still work as well (they just aren't advertised).
608 * Added a line to the "nmh configuration" output saying whether
611 * Added a new README.developers file. From the file:
613 This file is intended to provide a few tips for anyone doing
614 development on nmh. Developers who learn things "the hard
615 way" about the nmh codebase (as opposed to local info best
616 encoded in a comment) are encouraged to share their wisdom
619 Currently the topics are "autoconf files" and "directory structure".
621 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
623 * Applied, after some finessing,
624 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
626 Here's a patch that allows you to add
628 --with-smtpservers=<some.host.name>
630 to the ./configure command line to set the "servers: " line in
631 etc/mts.conf. Around here, we use "mailhost" so that all
632 machines in the current domain just talk to a central machine
633 and nothing else runs an MTA. Now, I can use
635 --with-smtpservers=mailhost
637 instead of having to remember to fix this by hand (and often
638 forgetting to do so!).
640 * Inspired by Simon's patch, added an --enable-masquerade option
641 to configure. It will set the "masquerade:" line of mts.conf.
642 You may specify a subset of the three types of masquerading, like
643 --enable-masquerade="draft_from mmailid", or leave off explicit
644 arguments to enable all three types.
646 * Alphabetized the --enable and --with options in configure.in and
647 INSTALL and added documentation of the two new options to the latter.
649 * Added new dependency for mts.conf: Makefile. If this isn't
650 done, then when you reconfigure nmh with new values for
651 --enable-masquerade or --with-smtpservers, you'll fail to get an
652 updated copy of mts.conf.
654 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
656 It seems that some MUA's didn't handle y2k very well - ELM
657 seems to be one of them, and Ultrix's DXmail (based on MH!).
658 I've got a few emails this month that look like:
660 575 Jan 00 Xxxxxx Xxxx 3603 ...
662 22+ Jan 00 Xxx Xxxxx 1771 ...
664 The first has "15 Jan 100" as the date and the second has
665 "19 Jan 00" as the date. The following works around this so
666 that scan, show, sortm, etc work ok.
668 I put Simon's patch under the control of a new #define called
669 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
670 acconfig.h about when you might not want to #define it.
672 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
673 lexed on Solaris 2.6. Added missing dependency in
674 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
676 * Added scan.MMDDYY and scan.YYYYMMDD format files.
678 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
680 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
682 With the patch below, you can add lines like:
684 mhshow-suffix-application/msword: .doc
685 mhshow-suffix-application/PostScript: .ps
687 to the mhn.defaults file to append the given suffix to a
688 scratch file. This allows applications which require a
689 certain suffix to run properly.
691 * Removed -force_html from lynx entry in mhn.defaults.sh (I
692 believe older versions of lynx lack that option) and added
693 "mhshow-suffix-text/html: .html".
695 * Modified username_extension masquerading to only use the
696 extended address on generated [Resent-]From: lines and SMTP
697 envelope From:. With Neil's original implementation, nmh's global
698 idea of the username was changed, which would result in inc lying
699 and saying you had no new mail because it was looking for a
700 mailbox called, for instance, "dan-nmh" (where username was "dan"
701 and $USERNAME_EXTENSION was "-nmh").
703 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
705 There's a wrap-around problem that affects the implementation
706 of Zeller's congruence in dtime.c. This causes the day-of-week
707 calculations to fail for dates after Feb 29, 2000 (probably up
708 until some year far in the future).
710 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
712 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
714 I finally tracked down the problem in msh that was causing
715 errors whenever I tried to examine a 'mmdf' style mailbox.
717 It turns out that not enough memory was being allocated with
718 calloc(), causing memory pointers to be overwritten and
721 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
723 * Changed the new "plussed_user" option to mts.conf's
724 "masquerade:" to "username_extension" after getting feedback from
725 qmail users, who use '-' as a separator rather than '+'. Removed
726 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
727 which needs to include the appropriate separator for your MTA
728 ('-', '+', or whatever) as its first character.
730 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
732 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
734 * Added a note to DIFFERENCES stating that it's out-of-date
735 (Richard was the last one to update it) and that we should
736 consider only documenting incompatibilities with MH there.
738 * Implemented (and documented) a third kind of username
739 masquerading: "plussed user" masquerading. This one was suggested
740 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
741 "plussed user" feature, where mail sent to <user>+<string> will be
742 delivered to <user>. When it's enabled, it's controlled by the
743 $USERPLUS environment variable. How is it enabled? Well, that
746 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
747 changed it so that rather than being a boolean, it can be set to
748 any combination of the three values "draft_from", "mmailid", and
749 "plussed_user". Thus it is now possible to enable the three types
750 of masquerading individually.
752 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
753 where if it was turned on, ','s would no longer be considered
754 GECOS field delimiters.
756 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
758 * Changed the GECOS-field '&' translation behavior to be
759 controlled by the BSD42 #define rather than GCOS_HACK, since it's
760 apparently always appropriate on OSes where BSD42 is #defined, and
761 never appropriate on any other OSes. Thanks to Kimmo Suominen for
762 responding to my "What is this code here for?" comment in mts.c
763 and explaining the feature.
765 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
767 * Upped the version number to 1.0.3+dev (ideally this should be
768 done by whoever makes a release tar file, immediately after doing
771 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
772 patch, posted to comp.mail.mh, which he says prevents loss of mail
773 when inc'ing into a full filesystem.
775 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
776 so that stamp-h.in will be different each time configure.in and
777 related files are changed, making it easier to check it in (which
778 is necessary to prevent unnecessary autoconf calls).
780 * My declaration of initgroups() in slocal.c to eliminate the "no
781 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
782 use AC_EGREP_HEADER to see where initgroups() is declared, if
785 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
787 * Fix security hole in mhshowsbr.c which allowed untrusted shell
790 * Released nmh 1.0.3.
792 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
794 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
795 be surrounded by single quotes, as a shell is not spawned when
796 just saving files, and the filenames will end up with literal
797 quotes embedded in them.
799 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
801 * Whoever originally added the -help switch to all the commands
802 got too cute and had the option itself print out as "-(help)" in
803 the -help output. One theory is that they were making reference
804 to the fact that clearly you know about the -help option since
805 you're currently looking at its output. I think it's a bad idea
806 to overload the meaning of the parentheses, however -- they're
807 supposed to indicate what abbreviated prefix of the switch you're
810 The other theory is that because you can say something like
811 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
812 by the same list of switches you get with -help, they were saying
813 you can "sorta" abbreviate "-help" as "-". You don't get the
814 "Usage:" string, though, so it's not really the same thing.
816 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
818 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
820 The following patch fixes a problem with requesting a
821 service key for a machine that has multiple 'A' records. It
822 also makes "-kpop" a command line option, for users who
823 would like to use both "kpop" and "pop".
825 Did no testing of the new features, as I don't have access to a
828 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
830 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
832 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
834 * All %-escapes in mhn.defaults that actually expand to something
835 should be surrounded by single quotes. Added quotes to the ones
836 in mhn.defaults.sh that were missing them.
838 * Added check for lynx to write mhshow-show-text/html line in
841 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
843 * makedir() had multiple bugs dating back to MH. An octal
844 constant was apparently being interpreted as decimal, resulting in
845 directories with no user read or execute permissions, making
846 nested directory creation fail. And there wasn't even an
847 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
848 in .mh_profile) on the outer directories of a nested directory.
850 * A second `make install' would always fail because the check for
851 whether mh_profile.5 existed was written incorrectly.
853 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
855 * Added documentation on both types of masquerading to post's man
858 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
860 * Doug's portability fix of my setgid inc autodetection had a
861 caching bug -- if you re-ran configure, uip/Makefile would be
862 corrupted, and installation would bomb out on OSes where inc needs
865 * Implemented a new kind of email address masquerading. Usually,
866 when a user writes a custom "From:" header in a draft, nmh uses it
867 rather than generating one. However, the user's true address is
868 used in the SMTP envelope "From:" and is revealed in the "Sender:"
869 header. Now, when mmailid is set to non-zero, the envelope
870 "From:" uses the address specified in the draft "From:" header,
871 and there is no "Sender:" header. This is useful when sending on
872 behalf of a remote POP3 account or when remote mail robots
873 incorrectly use the envelope "From:" in preference to the body
874 "From:". This processing has only been implemented for post, not
875 for the undocumented spost (which was already missing some "From:"
876 processing that post has).
878 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
880 * Got rid of the rest of the gcc -Wall warnings that I didn't have
881 time for on 1999-07-15 (and, it would seem, some new ones people
882 introduced since then). The primary ones were the warnings that
883 default prototypes were being used for [v]snprintf() and
884 str[n]casecmp(). As of right now, there are _no_ compilation
885 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
888 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
890 * Move mhtest from bindir to libdir.
892 * Move sendfiles from libdir to bindir.
894 * Updated sendfiles manpage to reflect this change.
896 * Added documentation for -build and -file switches to repl and
897 forw manpages (patch from Peter Maydell).
899 * Fixed interaction between specifying -cc in profile and -group on
902 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
904 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
905 not unanimous support for my proposed even/odd release/developer
906 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
909 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
911 * Upped the version number to 1.0.3. If we don't do this, then
912 when people report bugs against 1.0.2, we won't know "which" 1.0.2
913 they're talking about (since the development source is publically
914 available via CVS). I think the Linux kernel version numbers are
915 a good model, so the next time we roll a tarball, it should be
916 version 1.0.4 (or higher -- anyhow, an even-numbered version).
918 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
920 * Released nmh-1.0.2.
922 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
924 * Added check for whether "libtool" is in fact gnu libtool. If
925 it is, it is not used. This is the wrong behavior. If vendor
926 XYZ later on decides to create yet another libtool, we'll be
927 caught again. This works for now.
929 * Minor updates to MACHINES refering to Mac OS X.
931 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
933 * Added check for "libtool" (a ranlib type tool for Mac OS X)
934 and modified Makefiles so that nmh will build under Mac OS X.
936 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
938 * Changed repl defaults to partly revert to MH behaviour,
939 "-cc all" is now only implied with -group.
941 * The replcomps template includes cc: header again (as in MH).
943 * Updated repl man page to reflect these changes.
945 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
947 * Tweaked configure to handle Solaris and SunOS after the BIND
948 changes. Both need more cleanup.
950 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
952 * Removed BIND define and replaced it with a check for
953 gethostbyname (to determine if the host is DNS aware) and a
954 check for sethostent. This appears to be the right thing to
955 do, but there is no explanation of the reasoning behind the
956 BIND define in the code and it appears to have been used for
959 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
961 * Updated manpages Makefile to link mh-profile.5 to
962 mh_profile.5 after installation. Suggestion from Richard Cohen
963 <richard@jubjub.demon.co.uk>.
965 * Modified configure.in to check for _IO_write_ptr and libio.h
966 to determine whether to define LINUX_STDIO instead of using
969 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
971 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
972 multiple machines in the past where the mail spool was a symlink
973 to a directory on another device with more free space.
975 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
977 * Fixed a portability problem in Doug's fix of a portability
978 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
980 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
982 * Added config.sub and config.guess to the list of files to be
985 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
986 added if a list of addresses was split over several header lines.
988 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
989 macros, regardless of platform.
991 * Allow q to quit mhshow, and n to skip to next part. Patch from
992 Kimmo Suominen <kim@tac.nyc.ny.us>.
994 * Modified mhstore to recognize attachments created by sendfiles
995 with x-conversions=gzip.
997 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
999 * added explicit cast to long from time_t for tclock in
1002 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
1003 it's needed for ioctl() anyway. This prevents a warning about
1004 implicit definition of ioctl().
1006 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
1007 "User Configuration" section of config.h (moved @TOP@ in
1008 acconfig.h) so they're easier to find, should someone actually
1009 want to mess with them.
1011 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
1013 * updated Makefile.in so it recognized COMPLETION-TCSH and
1014 COMPLETION-ZSH (only used in make nmhdist).
1016 * added prototype for ruserpas to <h/prototypes.h>. Fixes
1017 warnings in mhparse.c and mhbuildsbr.c.
1019 * added include checks for <time.h> and <sys/time.h> to
1020 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
1021 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
1023 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
1024 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
1025 warnings about implicit definition of mts_init().
1027 * added <grps.h> to slocal.c to prevent warnings about
1028 function initgroups.
1030 * added <h/signals.h> to prevent warning about missing SIGNAL
1033 * added function prototypes to smtp.c, whatnowproc.c,
1034 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
1037 * explicitly declared mbx_style in mshcmds.c and lused in
1038 fmtdump.c as type static int instead of just static to
1041 * various code cleanups to prevent ambiguous statements
1042 (brackets for if/thens and parens for complicated if
1046 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
1048 * commented out _cleanup() in mf.c because it's the only
1049 location in all of the source code where it exists. It was
1050 preventing compilation on at least linux.
1052 * Added check for <db1/ndbm.h> which is the new location where
1053 linux systems appear to be stuffing this header file.
1055 Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
1057 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
1059 * added mh_profile SEGV patch from Richard Cohen
1060 <richard@jubjub.demon.co.uk> that prevents crashing when
1061 mh_profile doesn't end in a newline. A similar patch was
1062 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
1064 * fixed bug in associated with MAILGROUP #define (group "mail"
1065 is not universal) -- hard to believe, but true.
1067 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1069 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
1071 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1073 * Automated #define of MAILGROUP and installation of inc as setgid mail
1074 when the mail spool directory isn't world-writable.
1076 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1078 * slocal -debug used to leave a file in /tmp for each message
1079 processed. Very bad for folks with slocal -debug in their .forward!
1081 * Got rid of a ton of compilation warnings. Most were "junk"
1082 warnings due to the use of gcc -Wall (without -Wno-parentheses),
1083 but a few represented real bugs. There remain many warnings to be
1084 tackled that are due to missing function prototypes (e.g. snprintf()).
1086 * Default rcvdistcomps no longer puts a copy of all outgoing
1087 messages in outbox. Added an rcvdistcomps.outbox that does.
1089 Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
1091 * Updated configure to check for mkstemp (available on OpenBSD) and
1092 substitute it for mktemp if available.
1094 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
1096 * Added config.sub and config.guess and updated acconfig.h and
1097 configure.in to automatically detect system type and set the
1100 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
1102 * Released nmh-1.0.1.
1104 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
1106 * Fixed flist to properly deal with relative folder names.
1107 Problem noted by Jerry Peek <jpeek@jpeek.com>.
1109 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
1110 well as the Kerberos 5 compat libraries. Based on a patch from
1111 Assar Westerlund <assar@sics.se>.
1113 * Added a check in configure.in to test if modf is in libc and
1114 link with libm if not. This is needed by at least Digital UNIX.
1115 Problem pointed out by Kevin Oberman <oberman@es.net>.
1117 * Fix a bug from the "mhn -show" to "mhshow" renaming that
1118 made the "list" command in whatnow not work for some users.
1119 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
1121 * Replaced "extern int errno" with "#include <errno.h>" in a
1122 number of files. Suggested by Stephen Wilson Bailey
1125 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
1126 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
1128 * Fixed a segmentation fault in inc. Patch originally from Ruud de
1129 Rooij <r.c.m.derooij@twi.tudelft.nl>.
1131 * Allow display of 8bit encoded messages. From Kimmo Suominen
1132 <kim@tac.nyc.ny.us>.
1134 * Fixed repl to not add line breaks in the middle of long
1135 addresses when building a reply. From Ruud de Rooij
1136 <r.c.m.derooij@twi.tudelft.nl>.
1138 * Added -library switch to spost so it can parse user aliases like
1139 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
1141 * Changed configure.in's check for sigsetjmp to properly deal
1142 with systems like Linux where it is a macro. From
1143 <elleron@servtech.com>.
1145 * Fixed a bug in whatnow that could cause it to sometimes exit
1146 without prompting the user. Based on a patch by Richard Geiger
1149 * Added code to deal with SIGPIPE in mhl so it doesn't print
1150 "Broken pipe" if you quit out of the moreproc.
1152 * Documentation: Added a note to MACHINES about Irix make. Added a
1153 pointer to the online copy of the MH book in INSTALL. Added
1154 some additional information to the whatnow and packf man pages,
1155 suggested by Jerry Peek <jpeek@jpeek.com>.
1157 * Updated INSTALL, FAQ, etc to not refer to Richard as the
1158 maintainer or math.gatech.edu as the home any more.
1160 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
1164 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
1165 mbx_open so that the mode of zero length maildrops
1166 would not be changed.
1168 * Replaced the substitute version of snprintf() with the
1169 one from the Apache web server.
1171 * Changed to default mode for creating new messages to 0600
1172 (this should have been done a long time ago).
1174 * Changed "flist" to handle searching for multiple sequences
1175 for each folder. Also flist will now correctly split
1176 Unseen-Sequence if it consists of multiple sequences.
1178 * Added new switches `-unlink' and `-nounlink' to "refile".
1180 * Added new switches `-unlink' and `-nounlink' to "rmm".
1182 * More cleanups of slocal output. Changed adorn() to
1183 send to stdout, instead of stderr (to match rest of
1186 * Merged mbx_create() into mbx_open, so that creating and
1187 opening a nonexistent maildrop is done atomically. This
1188 removes a bad race condition.
1190 * Fixed bug that caused slocal to be unable to save to MMDF
1193 * Added new wrapper function usr_folder() to slocal.c to
1194 handle adding message to folder (currently, it still uses
1195 usr_pipe() to call rcvstore).
1197 * seq_list() checks for empty folder before scanning for
1198 sequence information.
1200 * num_digits() in flist.c and folder.c now returns correct
1201 value for 0. Also added sanity check.
1203 * folder_delmsgs() now correctly decrements internal message
1206 * Don't attempt to read sequence information if folder
1209 * Split seq_read into seq_public and seq_private.
1211 * Small change to sigmsg.awk, since newer versions of gawk
1212 interpret 034 as octal.
1214 * In flist, don't scan for sequence information in empty folder.
1216 * Updated mhn.defaults.sh to output profile entries for mhshow,
1217 mhstore, and mhbuild.
1219 * Changed configuration parameter "mhn-access-ftp" to
1220 "nmh-access-ftp". Updated man pages
1222 * Moved the code in InitMultipart to reverse the order of the
1223 parts in a multipart, into its own function "reverse_parts()".
1225 * Changed code in mhbuildsbr.c to store unencoded content
1226 in the c_cefile structure when building.
1228 * Changed code in mhoutsbr.c to look for unencoded content
1229 in the c_cefile structure when outputing message.
1231 * Changed configuration parameter "mhn-cache" and
1232 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
1233 since it is used in mhstore, mhlist, and mhshow. Updated man pages
1235 * Change configuration parameter "mhn-storage" to
1236 "nmh-storage", since it is now used in mhstore, mhlist,
1237 and mhshow. Updated man pages
1239 * Add autoconf support for KPOP (kerberized pop).
1241 * Add autoconf support for Hesiod.
1243 * Split routines to output a message given a Content structure
1244 (output_message, output_content, write7Bit, etc..) to a new
1247 * Split output_content(), into output_content() and build_headers().
1249 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
1250 list of header fields, rather than reopening the message.
1252 * Added free_header() to mhfree.c to free structures containing
1253 header field information.
1255 * Changed get_content() to use the linked list of header fields
1256 when parsing the various MIME headers (Content-XXX).
1258 * Changed get_content() to store linked list of header field
1259 values when parsing a content.
1261 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
1262 routines in mhcachesbr.c to handle the content cache.
1264 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
1265 cache_content) into new file mhcachesbr.c.
1267 * More calls to sprintf/strcpy (primarily in mhparse.c
1268 and mhbuildsbr.c) converted to snprintf/strncpy.
1270 * When a message is displayed with `mhshow', it is now
1271 removed from the "unseen" sequence.
1273 * Change the default "showmimeproc" to "mhshow".
1275 * Split "mhn -show" off into separate command "mhshow".
1277 * Split "mhn -store" off into separate command "mhstore".
1279 * Split "mhn -list" off into separate command "mhlist".
1281 * Add sanity checks to context_find(), context_replace(),
1282 and context_del(), to abort if context file hasn't been
1285 * Add calls to context_read(), to the beginning of all nmh
1286 commands (instead of being called indirectly by context_find).
1288 * Changes the "substitute" version of vsnprintf/snprintf for
1289 operating systems without native versions, to just call the
1290 native vsprintf(), and ignore the buffer length. This is
1291 faster, but less secure than the previous version that used
1292 temporary files. This should only be a problem for systems
1293 which do not have a native snprintf(), and require `inc' to
1296 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
1298 * Changes client() routine to take additional parameter, which is
1299 the buffer length of the parameter "response". Then added
1300 buffer length checks for this parameter.
1302 * Changed getws() to get_fields(), since that is apparently the
1303 name of a wide character version of gets() on some archetitures.
1305 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
1307 * Change the code in most of the commands that take multiple
1308 message names/sequences/ranges on the command, such that
1309 the msgs array is expanded dynamically. This removes most
1310 of the limits on the length of command lines.
1312 * Add additional parameter to copyip(), to specify the
1313 maximum number of strings that can be copied (security
1316 * Create new function getarguments(), to massage the argument
1317 vector before parsing it (add any arguments from your
1318 profile to the beginning of the argument vector). This
1319 also removed the general limit on the number of command line
1322 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
1324 * Released nmh-0.27.
1326 * Added a new command "delete", that is available during
1327 a "whatnow" session. It is equivalent to "quit -delete".
1329 * Added another parameter to editfile (in whatnowsbr.c),
1330 that controls whether editfile should remember the last
1331 program that was exec'ed. This way the whatnow command
1332 "mime", will not be re-executed if "edit" is later given
1335 * Changed whatnowsbr.c, so that whatnow doesn't abort if
1336 mhbuild returns an error.
1338 * Added parameter to sendsbr(), so you may specify whether to
1339 rename the draft file.
1341 * Pass delay time to splitmsg() as a parameter, rather than
1342 use a global variable.
1344 * Moved code to rename draft file after sending message from
1345 splitmsg and sendaux, to sendsbr.
1347 * Removed all the code in viamail to split messages and then
1348 mail them. Replaced this with the standard sendsbr.c routines.
1350 * Changed sendsbr(), so that when splitting messages into
1351 messages of type "message/partial", the header fields that
1352 are copied are more compliant with RFC-2046.
1354 * Fixed mhbuild to track temporary files better. They are
1355 now correctly removed when mhbuild aborts.
1357 * Created a new man page for "sendfiles". The information
1358 about "mhn -viamail" in the "mhn" man page was moved to
1361 * Changed the name of the "viamail" shell script to
1362 "sendfiles". Modified "sendfiles" to use the new
1365 * Moved the functionality for "mhn -viamail" out of mhn,
1366 and into a separate executable called "viamail".
1368 * When storing MIME contents to a folder using mhn -store,
1369 they are now accumulated in a temporary file, and then added
1370 to the folder using folder_addmsg().
1372 * Moved code to save content to a folder from store_content
1373 to new function output_content_folder.
1375 * Moved code to save content to file from store_content to
1376 new function output_content_file.
1378 * Moved code to parse storage format string from store_content
1379 to new function parse_format_string.
1381 * Fix copy_some_headers() in mhstoresbr.c, so that the
1382 correct header fields in the first enclosing message/partial
1383 will be copied (according to RFC2046), when using mhn -store
1384 to reassemble messages of type message/partial.
1386 * Fixed bug to openFTP() in mhparse.c, that caused the
1387 tmp file to not be removed, when transferring a
1388 message/external file from ftp.
1390 * Moved the code in mhparse.c to process -auto switch (scan
1391 contents for the attribute "name"), to a new function
1392 "get_storeproc" in mhstoresbr.c.
1394 * Moved routines to free data structures related to MIME
1395 content from mhparse.c and mhbuildsbr.c, to new file
1398 * Moved code to show/display MIME content into new
1401 * Moved code to store MIME content from into
1402 new file mhstoresbr.c
1404 * Moved code to parse MIME content into new
1407 * Moved code to list information about MIME content
1408 into new file mhlistsbr.c.
1410 * Move part_ok(), type_ok(), content_error(), flush_errors(),
1411 and set_endian() to new file mhmisc.c.
1413 * Start to isolate the code to show, list, and store MIME
1414 messages. One side effect is that only one flag (-show,
1415 -list, or -store) can be used at a time now.
1417 * mhn -store -auto wasn't storing file in correct directory.
1419 * Removed a few dead variables from sbr/ruserpass.c
1421 * move code for creating tmp files, and renaming the
1422 the composition draft in mhbuild, from build_mime()
1425 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
1426 the -[no]auto switch (which isn't used in mhbuild).
1428 * split mhn.c into mhn.c and mhnsbr.c (name later changed
1431 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
1433 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
1435 * Released nmh-0.26.
1437 * Added (unlisted) options [no]dashstuffing to send, post,
1438 and whatnow to determine whether to do RFC934 quoting
1439 (dashstuffing) for encapsulated BCC messages. The default
1440 is still the same (dashstuffing).
1442 * Changed the undocumented feature "nodashmunging" in forw
1443 and mhl, into the documented feature "nodashstuffing". The
1444 default for forw, is still "dashstuffing" for backward
1445 compatibility, although I don't believe that bursting
1446 RFC934 digests is very common anymore.
1448 * Added an option to define REALLYDUMB in the default config.h.
1449 But it is not on by default.
1451 * moved creation of config file mts.conf from zotnet/mts
1452 to etc. This simplified the Makefile in zotnet/mts.
1454 * simplified directory support/general to etc.
1456 * removed unneeded directory support/bboards.
1458 * split getusername() into getusername() and getuserinfo().
1460 * Changed getusr() routine to getusername().
1462 * Slight cleanup in folder_pack.c on code that records the new
1463 number of the "cur" message when packing.
1465 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
1467 * Released nmh-0.25.
1469 * Change install process, so that hard linking the correct mts
1470 library to libmts.a, is not necessary. The final link process
1471 uses the original name of the library.
1473 * Fixed bug in flist.c and folder.c, so that symbolic links which
1474 point to directories, will not decrement the number of directory
1477 * Split the function list_content (in mhn.c and mhbuild.c) into
1478 list_content and list_debug.
1480 * Don't pack (folder -pack) an empty folder.
1482 * Exit gracefully in flist.c, if no sequence is specified,
1483 and no "Unseen-Sequence" is given in nmh profile.
1485 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
1487 * Released nmh-0.24.
1489 * Small clarification to the man page for `ali'.
1491 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
1492 are given, that order doesn't matter.
1494 * Fix bug in seq_list.c when realloc'ing for
1495 large sequence line.
1497 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
1499 * Released nmh-0.23.
1501 * Add new section on "Transfer Encodings" to man page for mhbuild.
1503 * In mhbuild.c, split compose_content into compose_content
1504 (parse and execute composition string), and scan_content (scan
1505 content, decided transfer encoding, check for clash with boundary
1506 string). I did a good amount of rearranging of this code.
1508 * Moved definitions for data structures for parsing MIME
1509 messages from mhn.c and mhbuild.c to a new include
1512 * Small amount of rearranging in sendsbr.c
1514 * Small changes to MAIL.FILTERING file.
1516 * Add the file MAIL.FILTERING to nmh distribution.
1518 * Add line to packf so that if message begins with
1519 "X-Envelope-From:" field, it is converted to "From ".
1521 * Fix packf to add "From " line to beginning of message,
1522 even if Return-Path doesn't exist.
1524 * Add note to MACHINES file that on Linux, configure
1525 doesn't find the functions sigsetjmp/siglongjmp.
1527 * Fix configuration for machines that don't have (or find)
1528 sigsetjmp/siglongjmp.
1530 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
1532 * Released nmh-0.22.
1534 * Add a configure check for sigsetjmp. Add some conditional
1535 #define's in h/signals.h in case it's not found.
1537 * Added additional notes about -auto switch in mhn man page.
1539 * Added note about MM_CHARSET environment variable to
1540 mh-profile(5) man page.
1542 * Fix signal problem in mhn.c (change setjmp/longjmp to
1543 sigsetjmp/siglongjmp).
1545 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
1547 * Released nmh-0.22-pre1.
1549 * Changed the first line in mhl.format from
1550 " -- using template mhl.format -- " to a blank line.
1552 * Added note about automimeproc to mh-profile man page.
1554 * Reorganize the main entry point for parsing a MIME message
1555 or file in mhn. Add new function parse_file() as new main
1556 entry point for parsing MIME files.
1558 * Add note to mhn man page, that "mhn -file -" will accept the
1559 source message on the standard input.
1561 * Changed a sanity check in folder_realloc that was too strict.
1563 * -norfc934mode is now the default for mhbuild,
1564 rather than -rfc934mode.
1566 * Fix mhbuild, so that Content-Description and RFC-822 comments
1567 from #forw directive will be correctly included if there is
1570 * Change mhn to correctly default parts of multipart/digest to
1571 message/rfc822 (leftover code from rfc934mode was removed).
1573 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1576 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1578 * Released nmh-0.21.
1580 * If the file given to mhbuild is "-", then accept the draft on
1581 standard input, and output the MIME message to standard output.
1583 * Cleaned up code in mhbuild.c that decides what transfer
1586 * Cleaned up code in mhbuild.c that decides what character set
1587 to use for text contents.
1589 * Removed old hpux specific code from zotnet/tws/lexstring.c
1591 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1593 * Released nmh-0.21-pre2.
1595 * Added the "decode" variable to mhl.format and mhl.header.
1597 * Added new variable "decode" to mhlsbr.c to decode text in
1598 header fields as per RFC-2047.
1600 * Make sure that when decoding RFC-2047 header fields, that any
1601 spaces at the ends of the encoded text are not ignored, but the
1602 spaces between encoded word are.
1604 * Removed #ifdef's for MIME. MIME support is always compiled in.
1606 * scan/inc will now decode both Subject and From lines as
1607 RFC-2047 encoded header fields.
1609 * Added new function write_charset_8bit() to sbr. It returns
1610 the character set to use for 8bit text in composition draft.
1611 Changed mhbuild to use this function.
1613 * Split mhn man page into man pages for mhn and mhbuild.
1615 * mhn -show will only now only use default method for content
1616 of type plain, if it is NOT a part of a multipart/alternative.
1618 * Split mhn -build into mhbuild. Did some code cleanup.
1620 * Added support for %(decode) to fmtdump.c.
1622 * check_charset() now accepts US-ASCII as a subset of any
1623 ISO-8859-X character set.
1625 * Changed the default "showproc" to mhl, instead of the
1628 * When reading file into mhn composition file, only need read
1629 permissions, not write permissions.
1631 * Added own version of strcasecmp to distribution, since
1632 nmh calls it frequently with NULL pointers (ughh).
1634 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1637 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1639 * Released nmh-0.21-pre1.
1641 * If a message is missing charset parameter to text/plain, show
1642 will assume US-ASCII, rather than just calling showmimeproc.
1644 * Change show.c and mshcmds.c to use check_charset to see if text
1645 message contains valid character set.
1647 * Added new scan format file "scan.nomime" to support/general
1648 that doesn't do any RFC-2047 decoding.
1650 * Modified all the scan format files in support/general to do
1651 RFC-2047 decoding of Subject field.
1653 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1654 ignore whitespace between two valid encoded words, but not
1655 between an encoded word and normal text.
1657 * Created new file sbr/check_charset.c. Moved code from
1658 fmt_rfc2047.c to check for valid character set to this file.
1660 * Added format escape %(decode) to decode contents of "str" register
1661 as a RFC-2047 header field.
1663 * The command install-mh now recognizes the switches -version
1666 * Added a new argument to print_help.c to decide whether to
1667 print profile entries (needed for install-mh to prevent weird
1670 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1671 is initialize to max (mp->lowmsg, 1) rather than always 1.
1673 * Changed macros for sequence/attribute manipulation so that
1674 message status array doesn't need to always start at 1.
1676 * Small cleanups in folder_realloc().
1678 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1680 * Released nmh-0.20.
1682 * Added configure option --with-pager=PAGER.
1684 * Added configure option --with-editor=EDITOR.
1686 * Changed the default format file for mhl (mhl.format) to
1687 also ignore (not display) the header fields Content-Type,
1688 Content-Transfer-Encoding, and Content-ID
1690 * Fixed core dump in addrsbr.c when using %(proper) format function
1691 and the To: line was missing.
1693 * Added the file ZSH.COMPLETION to the distribution.
1695 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1697 * Released nmh-0.20-pre2.
1699 * Added new switch -snoop to both `msgchk' and `inc', so you can
1700 watch the POP transaction.
1702 * Changed "replgroupcomps" to check for Mail-Followup-To header
1703 first, and use it if available.
1705 * Changed "replcomps" to check for Mail-Reply-To header
1706 first, and use it if available.
1708 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1710 * Released nmh-0.20-pre1.
1712 * Changed seq_list.c to dynamically enlarge the buffer for
1713 collecting the message ranges in a long sequence line.
1714 This should remove the last hard limit on the size of a
1717 * Changed seq_read.c so that can read long sequence lines.
1718 It will use multiple calls to m_getfld() when m_getfld()
1719 returns the state FLDPLUS.
1721 * Changed brkstring.c to dynamically add more space for pointers
1722 if necessary. This is needed when splitting up large sequence
1725 * Did some small cleanups in seq_save.c.
1727 * Added new switches `-[no]unseen' to rcvstore, to control
1728 whether new messages are added to Unseen-Sequence.
1730 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1732 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1733 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1735 * Changed "replcomps" to not include CC and TO lines so that
1736 that reply message is only directed at the author of the
1737 message to which you are replying.
1739 * Added new switch `-group' to command repl, which causes repl
1740 to use new forms file "replgroupcomps". This is intended for
1741 making group replies.
1743 * Removed #ifdef for ATHENA.
1745 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1747 * Released nmh-0.19.
1749 * Fix repl,forw so that switch `-form file' will not abort
1750 as ambiguious (silly mistake on my part).
1752 * Cleaned up the mhn man page. Added info about a few escapes
1753 for the formatting/display strings that were not documented
1754 (%%, %t). Moved the BNF grammar for the mime composition file,
1755 to the end of the man page.
1757 * Added the options -[no]format to the command repl. The
1758 switch `-format' will filter the message to which you are
1759 replying with the standard message filter "mhl.reply", which
1760 is now included in the distribution. The `-noformat' option
1761 will negate the use of -format or -filter and not include
1762 the message to which you are replying in the draft.
1764 * Did some cleaning and reorganization on many of the man
1767 * Added debugging switch `-debug' to mhparam, which displays
1768 the values of all `procs' (and some other misc configuration
1769 info) that nmh keeps in global variables.
1771 * When using `refile -preserve', if a conflict occurs, then use
1772 the next available number above the message number you wish
1775 * In forw.c, split the code for creating MIME style forwarding
1776 out of copy_draft, and into copy_mime_draft.
1778 * Move routines in mark.c to print sequences, into new
1779 file sbr/seq_print.c
1781 * flist will now update the current folder.
1783 * Added the switches -[no]fast to flist, to replace
1784 -[no]total. The previous switches are still accepted
1785 but now undocumented.
1787 * More reorganization in flist of the code for
1790 * The command "flist +foo -all" will now scan the folder
1791 "foo" and all its 1st level children.
1793 * Add missing include file <h/mh.h> to sbr/snprintf.c
1795 * Fix alarm bug in rcvtty, so that when it calls external
1796 process, the alarm is never longer than 30 minutes.
1798 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1800 * Released nmh-0.18.
1802 * Fixed bug in mark, so that "mark -list -seq foo" will
1803 correctly indicate if "foo" is a private sequence. I found
1804 this bug mentioned in Jerry Peek's book.
1806 * Simplified the code in seq_setcur(), since seq_addmsg() now
1807 retains the public/private status of sequences.
1809 * Changed sequence handling so that if the switches -public
1810 or -nopublic, are not specified for the commands mark, pick,
1811 or rcvstore, then existing sequences will retain their
1812 previous public/private status.
1814 * mhparam now handles the mh-sequences profile entry
1817 * flist -all will now also check readonly folders (for
1820 * Improve the leaf optimization for folder command.
1821 It will now track the number of directories in a folder,
1822 and stop stat'ing files once it has hit all the subfolders.
1824 * Renamed m_getfolder to getfolder. Changed getfolder to
1825 take option to determine whether it should get current
1826 folder, or just default folder (Inbox). Changed rcvstore,
1827 inc, and rmf to use the new getfolder.
1829 * flist now indicates if a sequence is private.
1831 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1832 wait for stopped processes.
1834 * conflict will dynamically allocate space for group names,
1835 so it can now handle system with more than 100 groups.
1837 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1839 * Released nmh-0.18-pre4.
1841 * Check if we have enough message status space, before we
1842 call folder_realloc() in burst, mhpath, and m_draft().
1844 * mhn will now correctly identify a formatting string of "-"
1845 for the option -store, and send content to stdout.
1847 * Change the way that memory for message status is
1848 allocated. It is dynamcially allocated separately from
1849 the folder/message structure. This required changing
1850 folder_read.c, folder_realloc.c, folder_free.c.
1852 * Removed all the MTR code (experimental code for message
1855 * Renamed m_readfolder.c to folder_read.c and simplified
1858 * Renamed m_freefolder.c to folder_free.c.
1860 * Add function trim() to slocal.c to pretty print
1861 the debugging output.
1863 * Changed the name of m_packfolder() to folder_pack().
1864 Changed the name of m_remsg() to folder_realloc().
1866 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1868 * Released nmh-0.18-pre3.
1870 * Changed installation to add `flists' which is hard linked
1871 to `flist'. This is a equivalent to `flist -all'.
1873 * For flist, -showzero is on by default.
1875 * Major changes to flist. Default is now for flist to search
1876 current folder. The switch `-all' is now used to specify
1877 searching all top level folders. The new switch `-showzero'
1878 is used to print out folders that don't contain any messages
1879 in the given sequence.
1881 * Split BuildFolderList in flist.c into 2 functions
1882 (BuildFolderList, BuildFolderListR). Changed these functions
1883 so that flist now does better leaf optimization, and will stop
1884 stat'ing directory entries when it knows it has hit all the
1885 subdirectories of a given directory.
1887 * Reorganized code in folder.c, so that all relevant folders
1888 are scanned first and information recorded. Then all the
1889 folder summaries at printed out at one time.
1891 * Made the options of folder(s) more orthogonal. Now
1892 "folder -all -noheader -nototal" will do the right thing.
1894 * Added `-noall' switch to folder, for completeness.
1896 * Changed the default mode for creation of new folders
1899 * Slightly changed the format for flist. It now indicates
1900 if a folder is current. Also the width of the various
1901 fields are now calculated at runtime.
1903 * Changed the format for folder(s). Folder names
1904 are now left justified. The width of the various fields
1905 are calculated at runtime.
1907 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1909 * Released nmh-0.18-pre2.
1911 * Add paragraph to man page for install-mh and to INSTALL file
1912 about checking for global mh.profile.
1914 * Renamed m_find() to context_find().
1915 Renamed m_replace() to context_replace().
1916 Renamed m_delete() to context_del().
1917 Renamed m_update() to context_save().
1918 Renamed m_getdefs() to context_read().
1919 Renamed m_foil() to context_foil().
1921 * Change rcvstore to use routine folder_addmsg(), instead of
1922 adding message to folder itself.
1924 * Changed refile, so that if the switch -preserve is used,
1925 and a conflict occurs for a particular folder, then folder_addmsg()
1926 will just use next highest available number for that folder,
1929 * Make folder_addmsg() more robust. It will make repeated
1930 attempts to link file into folder if link returns with
1933 * Fix bug, so that that if forking sendmail, HELO will be sent
1934 unless clientname: option is defined but empty (so now it
1935 is the same as the direct smtp code).
1937 * Changed sprintb to snprintb (now we pass the buffer length
1938 to new routine). Changed code to use new function.
1940 * Added snprintf to sbr. Added configure check to build it
1941 if you don't have a native version (but haven't changed much
1942 code to use it yet).
1944 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1946 * Released nmh-0.18-pre1.
1948 * Fixed alarm bug in slocal, so that alarm is never
1949 called with a value larger than 30 mintues.
1951 * Fixed race condition in rmm and refile, so that
1952 context is updated before external rmmproc is called.
1954 * Removed all the OVERHEAD code.
1956 * Move code to add message to folder from refile.c
1959 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1961 * Did some rearranging of the internals of inc.c.
1963 * Make -inplace the default for anno, forw, dist, and repl.
1965 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1967 * Created new directory mts/sendmail for direct sendmail
1968 interface (although it currently still uses SMTP).
1970 * Removed all the TMA (trusted mail agent) code
1972 * Removed all the TTYD (terminal access daemon) code
1974 * Removed all the MF (uucp filtering) code.
1976 * Removed all the code for BERK.
1978 * Removed all the code for stand-alone delivery (MHMTS).
1980 * Split the file mts/sendmail/smail.c into sendmail.c and
1981 smtp.c. Changed the name of the directory to mts/smtp.
1983 * Changed autoconf to use @sysconfdir@ for location of
1984 configuration files.
1986 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1988 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1990 * Released nmh-0.17.
1992 * MAKEDEFS weren't passed down to recursive makes correctly.
1994 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1995 of hard-coding "/etc/utmp".
1997 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
2000 * Remove configure checks for ulong and ushort. Changed
2001 code to just use unsigned {short, long}.
2003 * Change addmsg function in refile.c to return new
2004 number of refiled message.
2006 * Added check in get_returnpath for empty unixbuf.
2008 * Cleanup of sbr/pidstatus to use more POSIX macros
2009 for return value of wait().
2011 * Change configure to also check /bin for "more".
2013 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
2015 * Released nmh-0.16.
2017 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
2019 * Added automimeproc, which should replace automhnproc.
2021 * multipart messages will no longer abort for messages
2022 of type 8bit or binary (although we still can't really
2023 deal with binary messages, yet).
2025 * Fix double free of c_storage. From John MacMillan.
2027 * mhn now treats unknown subtypes of "text" as text/plain.
2029 * mhn changed so that specifying mhn-show-multipart, or
2030 mhn-show-multipart/{mixed, alternate, etc...) will override
2031 the use of the internal method for displaying these types.
2032 Previously mhn would always use the internal method for subtypes
2033 mixed, alternate, digest, and parallel (even if an alternate
2034 method was specified in mhn.defaults).
2036 * mhn show treats unknown subtypes of multipart, as type
2037 multipart/mixed (as specified RFC2046).
2039 * mhn checks for the parameter "name" rather than "x-name".
2040 From MH-6.8.4 patch.
2042 * Fix double free of ctinfo in user_content when using
2043 #forw with single message. From John MacMillan (and
2046 * Changed -mhnproc switch for show, to -showmimeproc.
2048 * Changed profile entry "mhnproc" to "showmimeproc".
2050 * Added "mime" option to "whatnow", which calls the program
2051 "buildmimeproc" (default is mhn -build) to process MIME
2054 * Added -build switch to mhn, to process MIME composition
2057 * Did some reorganizing of mhn.c.
2059 * Changed casting in mts/sendmail/smail.c from (char) to
2060 (signed char) so SMTP reply codes work correctly for machines
2061 which used unsigned chars by default.
2063 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
2065 * Released nmh-0.15.
2067 * Added new form "scan.unseen" to distribution. It marks messages
2068 which are in any sequence in Unseen-Sequence.
2070 * Do some rearranging of date/time code in zotnet/tws/dtime.c
2072 * Fix sign extension bugs in fmt_scan.c.
2074 * Fix m_atoi.c so that strings ending in non-digit characters
2077 * Split code in burst.c so that finding delimiters of digested
2078 messages and bursting a message into multiple messages are
2079 two separate functions (find_delim and burst).
2081 * Add workaround fo AC_PATH_PROG in configure.in, so
2082 that BSD4.4 machines can find sendmail, vi, more.
2084 * Added "-width" option to rcvtty.
2086 * Change a few variable names in zotnet/mts/client.c since
2087 they conflict with defines on AIX.
2089 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
2090 unsuccessful if resulting file is less than 500 lines long
2091 (rather than 10, which was previous value), since AIX
2092 sed gives mangled file of about 200 lines.
2094 * Extract code in rcvstore.c to link message into folder,
2095 and put in own subroutine.
2097 * Extract code in refile.c to link message into folder,
2098 and put in own subroutine.
2100 * Moved code to remove messages from folder into own
2101 routine "folder_delmsgs" in sbr. Changed rmm.c and
2102 refile.c to use new routine.
2104 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
2106 * Renamed m_seqok to seq_nameok.
2108 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
2111 * Changed m_seqflag to return the number of a sequence rather
2112 than its bit flag. Changed its name to seq_getnum and renamed
2113 file to sbr/seq_getnum.c.
2115 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
2118 * Added zero switch to m_seqadd function to zero out bits before
2119 adding message to sequence.
2121 * Renamed function m_setvis to m_setunseen, and renamed
2122 corresponding file in sbr.
2124 * Renamed function m_setseq to m_setprev, and renamed corresponding
2127 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
2129 * Added new function m_seqdelsel to m_seqdel.c, which deletes
2130 all selected messages from a sequence.
2132 * Added new function m_seqaddsel to m_seqadd.c, which adds all
2133 selected messages to a sequence.
2135 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
2138 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
2140 * Renamed function pack_folder to m_packfolder, and moved it
2141 from uip/folder.c into its own file sbr/m_packfolder.c
2143 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
2145 * Changed function m_gmsg to m_readfolder. Renamed file
2146 sbr/m_gmsg.c to sbr/m_readfolder.c.
2148 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
2150 * Expanded rcvtty man page, and added small patch from
2151 MH-6.8.4 distribution.
2153 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
2155 * Released nmh-0.14.
2157 * Comment out configure test and code for tgetent to allocate its
2158 own termcap buffer when passed a NULL argument.
2160 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
2162 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
2163 to show. Restructured code to handle options to various
2164 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
2165 environment variable.
2167 * Added new man page `mh-draft' which documents the
2168 draft folder facility in nmh.
2170 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
2173 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
2174 fmtcompile.c to fmt_compile.c, and formataddr.c to
2177 * `send -help' wasn't showing the -(no)mime and -split
2180 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
2182 * Released nmh-0.13.
2184 * Changed mhpath so it doesn't abort if a message sequence
2185 such as "mhpath all" expands to more than 1000 messages.
2186 Also mhpath now dynamically reallocated space for message
2187 names (The number of command line arguments is still limited
2190 * Did some general restructuring of the code in folder.c
2191 that checks for folder information, and prints it.
2193 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
2195 * Changed `folder' to reallocate space for folder names if
2196 necessary. So `folders' can now handle more than 300 folders.
2198 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
2200 * Change configure to use a compile check to see if the tm struct
2201 has tm_gmtoff, rather than using egrep.
2203 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
2205 * Released nmh-0.12.
2207 * Had set_exists and unset_exists macros backwards.
2209 * Released nmh-0.11.
2211 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
2213 * Added documentation to mh-profile.man about the various
2214 `procs' (mhlproc, showproc, lproc, etc...).
2216 * Replace the bit twiddling for SELECTED, UNSEEN, and
2217 mp->attrstats with macros.
2219 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
2222 * Change fstat to stat in m_gmsg.c since Linux wants
2225 * Merge Linux patch sent in by Michel Oosterhof (original
2226 patch from bsa@kf8nh.wariat.org).
2228 * Document an undocumented MH feature. mhn -form mhl.null
2229 will suppress the display of the message header.
2231 * mhparam will now return "mhparam etcdir".
2233 * Add catproc to /config/config.c and use that in show.c
2234 and mshcmds.c, rather than hard coding in /bin/cat.
2236 * Add mhnproc to the list of `procs' in mh-profile.man.
2238 * Add configure test for lorder and tsort commands.
2240 * Commented out the padding in the `msgs` struct in h/mh.h
2242 * Change m_gmsg.c to allocate elements to the `info' array by
2243 500 elements at a time (rather than MAXFOLDERS / 5).
2245 * Add note to man page for mhmail that zero length messages are
2246 not sent. Need to use -body "" to send empty messages.
2248 * zotnet/mts/mts.c : compare character with '\0', not NULL.
2250 * sbr/getcpy.c : assign '\0' to character, not NULL.
2252 * add m_fmsg to most programs in uip so that they explicitly free
2253 folder/message structure when done with folder.
2255 * uip/slocal.c : cleanup processing of sender. Make sure it is
2256 defined even if message is missing "From " line.
2258 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
2260 * Released nmh-0.10.
2262 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
2264 * Add configure check for <locale.h>. Turn on LOCALE support
2267 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
2269 * Reversed previous decision to retain "From " lines in slocal.
2270 The "From " line is now removed from all messages.
2272 * inc now saves the date from the "From " envelope in the
2273 Delivery-Date header for all messages.
2275 * sbr/m_getfld.c: Clean up processing of Return-Path and
2276 Delivery-Date from the "From " envelope.
2278 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
2280 * client.c: cast iaddr to int before comparing return value
2281 of inet_addr with NOTOK.
2283 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
2285 * Grep test for signal names was failing on some OS'es because
2286 of missing tabs in regex.
2288 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
2290 * Released nmh-0.09.
2292 * Move config files and format files to *.old before installing.
2294 * Add configure check for killpg.
2296 * msh.c: include <termios.h> instead of <termio.h> and
2299 * prompter.c: don't include <sys/ioctl.h> anymore.
2301 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
2303 * Added `-mime' and `-nomime' options to `repl'.
2306 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
2308 * ruserpass.c : removed conflicting prototypes.
2310 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
2311 by `mesg' command. Previously only worked on BSD machines.
2313 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
2315 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
2316 than hard coded "/etc/utmp".
2318 * Released nmh-0.08.
2320 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
2321 when accessing ndbm/db file for duplicate suppression, instead of
2322 locking database itself.
2324 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
2326 * Added slocal action `mmdf' to deliver to a file in mmdf format.
2328 * Changed the slocal actions `file' and `>' to always deliver in
2329 mbox (uucp) format rather than be determined by RPATHS config
2332 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
2333 rather than mmdf format.
2335 * slocal now adds Delivery-Date field to all messages (previously it
2336 only added it to messages when delivering them to a file). The
2337 "From " line is now retained on all messages if compiling with
2338 RPATHS, rather than being discarded.
2340 * rcvpack no longer adds the Delivery-Date field to messages.
2342 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
2344 * Removed the script packmbox, since it's functionality has been
2347 * Changed packf so that it uses mbox (uucp) format by default
2348 rather than mmdf format. Added options -mbox and -mmdf to
2349 packf so you can choose the preferred format.
2351 * Changed rcvpack so that it uses mbox (uucp) format by default
2352 rather than mmdf format. Added options -mbox and -mmdf to
2353 rcvpack so you can choose the preferred format.
2355 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
2357 * Changed nmh to use dot locking by default (although you
2358 can still easily change this in config.h).
2360 * Simplified locking code. Removed code allowing setting of
2361 locking type in mts.conf. Now the locking type and locking
2362 directory (if any) can only be set at compile time.
2364 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
2366 * Prefer getting timezone information from tm->gmtoff rather
2367 than tzset and external timezone variable.
2369 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
2371 * Fixed typo in ruserpass.c in the variable toktabs.
2373 * When ruserpass was added to LIBOBJS, it was missing
2376 * Released nmh-0.07.
2378 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
2380 * Add check to configure, so that if ruserpass, or _ruserpass
2381 is not found, build version of ruserpass in sbr.
2383 * Added define's to discard.c, m_getfld.c, and scansbr.c so
2384 the code that manipulates internals of stdio, will build
2387 * Added #define to control whether to compile the simple
2388 built-in FTP client in mhn.
2390 * Added configure check for ushort and ulong. Change code
2391 to use ushort/ulong rather than u_short/u_long.
2393 * A couple of small cleanups in locking code.
2395 * Added configure check for gmtoff element in struct tm.
2397 * Added configure check for tzset.
2399 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
2401 * Released nmh-0.06.
2403 * Removed code for machines that don't have socket
2404 interface (how could they get mail anyway?).
2406 * Removed code for BSD41 machines. I don't think there are
2407 many such machines around anymore.
2409 * Add configure check for function uname, and prefer it
2410 over gethostname. General cleanup of zotnet/mts/mts.c.
2412 * Change all `lseek' calls to use POSIX symbolic constants
2413 SEEK_SET, SEEK_CUR, SEEK_END.
2415 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
2417 * Check lex generated file in zotnet/tws and use
2418 pre-generated version if necessary.
2420 * Released nmh-0.05.
2422 * Change to use reliable signals on all platforms that have
2423 sigaction. Change so that interrupted system calls are
2424 restarted for all signals except SIGALRM. This fixes alarm
2425 handling code in smail.c for BSD based systems.
2427 * Added lorder and tsort commands so that created libs can
2428 be linked in one pass.
2430 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
2432 * Changed pidwait so that while it is waiting for a child,
2433 it should block signals rather than ignore them.
2435 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
2437 * Add checks to configure for dbm_open and -lndbm.
2439 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
2441 * folder -pop and folder -push were freeing some memory too
2442 quickly, which caused the entry popped from the stack to not
2443 become the current folder.
2445 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
2447 * Released nmh-0.04.
2449 * Define ospeed and PC in termsbr.c is OS doesn't have
2452 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
2454 * editfile will create a symbolic link to the altmsg if it
2455 can't make a link, on any machine supporting lstat. Formerly
2456 this would happen only on BSD42 based machines.
2458 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
2460 * traverse (in popsbr.c) wasn't calling va_start before using
2461 variable argument list. Fixes core dump in inc when using POP.
2463 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
2465 * The variable pass in remotemail needed to be set to
2466 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
2469 * inc and msgchk were using -rpop by default when configured
2470 with POP support. Default is now -norpop.
2472 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
2474 * By default, post will now give the SMTP HELO command with
2475 the local hostname. If you specify a hostname with the
2476 clientname: option in mts.conf file, post will give the
2477 HELO command with that name instead. If the argument to the
2478 clientname: option is empty, no HELO command is given.
2479 (From the MH-6.8.4 diff)
2481 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
2483 * When using `-help' for a command, it will also print its
2484 profile compents from .mh_profile. (From MH-6.8.4 diff)
2486 * "slocal -file" will now correctly takes its input from
2487 a file (currently need to specify full path).
2489 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
2491 * "slocal -debug" will now issue a warning if a non-blank
2492 line in the .maildelivery file has less than 5 fields.
2494 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
2496 * Changed slocal so that code for duplicate suppression
2497 (MH config was MSGID) is always built. Added the options
2498 -[no]suppressdup to slocal to turn this on/off.
2500 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
2502 * Released nmh-0.03.
2504 * Fixed problem where mark would core dump if no
2505 .mh_sequence file existed.
2507 * Fixed problem where slocal would core dump if -debug
2508 option was given, and certain headers were missing.
2510 * Added patch to slocal to add `folder' (+) action, which
2511 is shorthand for piping message to rcvstore. Updated
2514 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
2516 * Changed flist option -unseen to -[no]all. Cleaned up
2519 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
2521 * Fixed flist. Changed the profile component `Folder-Order'
2522 to `Flist-Order. Added option `-sequence' to flist, so
2523 you can specify the name of the sequence to search for.
2525 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
2527 * A few minor portability cleanups. Changed to use PATH_MAX
2528 rather than MAXPATHLEN. Don't assume ospeed variable exists
2529 in termsbr.c. Removed some conflicting prototypes.
2531 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
2533 * Add configure test to check if tgetent will accept NULL
2534 and allocate its own buffer. Borrowed from zsh.
2536 * Changed libpath to etcpath.
2538 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
2540 * Cleaned up source code and Makefiles, so that if your `make'
2541 supports the VPATH option, you can build nmh in a different
2542 directory from where the source code is located.
2544 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
2546 * Released nmh-0.02.
2548 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
2550 * Split mhook man page into man pages for rcvdist, rcvpack,
2553 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
2555 * Changed code to use strerror, rather than using sys_errlist
2556 and sys_nerr directly.
2558 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
2560 * -compat switch from install-mh removed.
2562 * Changed the default POP port from "pop" to "pop3".
2564 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2566 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2567 (again) to mhn.defaults.sh. Changed find_program (again) to
2568 mhn.find.sh. mhn.defaults.sh now takes the search path
2569 as an argument. Default search path is now specified in Makefile
2570 rather than in script.
2572 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2574 * Changed mtstailor file to mts.conf. Updated man pages.
2576 * Changed si_value to si_val in mhn.c, since it conflicts with
2577 macro defined on Solaris.
2579 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2581 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2582 support for Emacs front-end mhe. It is on by default.
2584 * Added the following configure options: --enable-nmh-pop to
2585 enable client side pop support, --enable-nmh-smtp to enable
2586 SMTP support. Client-side pop support now compiles. Man
2587 pages for inc, msgchk, mh-chart now correctly added pop
2590 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2592 * Added configure test for bug in C libraries where linker
2593 can't find ruserpass, but can find _ruserpass.
2595 * Fixed configure test so that termcap variable ospeed is
2598 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2600 * Source files converted to ANSI C.
2602 * md5 now compiled separately rather than being included
2603 in mhn.c. Changed md5 to use memset and memcpy.
2605 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2607 * Collected the error routines adios, advise, admonish, and advertise
2608 into one file (error.c), and did some rearranging of the code.
2610 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2612 * Added awk script sigmsg.awk (originally written by
2613 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2614 automatically generate signal messages for pidstatus.c.
2615 Added files sbr/signals.c, h/signals.h. Code now uses
2616 sigprocmask to block signals (if available). Code now uses
2617 signal blocking on non-BSD machines.
2619 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2621 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2623 * Released nmh-0.01.
2625 * Added configure code to check for type of signals functions
2626 you have (POSIX or BSD style signals). Added function
2627 SIGPROCMASK to simulate sigprocmask on machines that don't
2630 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2632 * Added -version switch to all commands. Also added to
2635 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2637 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2638 POSIX termios.h style functions if present.
2640 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2642 * Changed support/general/bootmhn.sh to output new mhn_defaults
2643 file to standard output by default (makes it easier for testing).
2644 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2645 script to find_program.
2647 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2649 * Added patch to uip/folder.c from exmh distribution to
2650 speed up -recurse option.
2652 * Added flist command from exmh distribution. It doesn't work
2653 yet, but it compiles :-)
2655 * Changed default location for install to
2656 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2657 and configuration files go in nmh/etc, and support binaries go
2658 in nmh/lib. Of course, all this can now be changed in the top
2661 * Started with mh-6.8.3 as based and converted to autoconf.
2662 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2663 Pop support and plenty of other things, are now broken.
projects / nmh / blob