1 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
3 * applied Todd Miller's <Todd.Miller@courtesan.com> patch to
4 dropsbr.c to prevent core dumping on packf. Here's the note
7 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
8 core on a file w/o a From line with a line >= BUFSIZ.
9 I noticed this because I had a junk file in my mail
12 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
14 * wesley.craig@umich.edu did not document his previous KPOP patch,
15 so I did so, and asked him to check what I wrote. Unfortunately
16 he didn't notice my misunderstanding of his patch. I wrote that
17 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
18 exclusively, but if you leave it as "pop3", you can use Wesley's
19 new -kpop switch on a given invocation. Instead, however, -kpop
20 turned out to be necessary on every invocation, and a KPOP user
21 complained. Applied Wesley's new patch, which makes things work
22 like I thought his original patch did. After that, did one more
23 clarifying pass to the documentation in inc.man and msgchk.man.
25 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
27 * When I fixed the long-standing makedir() bugs in January, I had
28 the code call strtoul(..., 0), which I believed to be safe as all
29 modes specified as ASCII constants in the nmh code started with a
30 leading zero (signifying octal), which I did as it would work if
31 internal constants were ever changed to hex. Unfortunately I was
32 unaware of the "Folder-Protect:" .mh_profile entry, which
33 mh-profile.man documents as an octal-only constant, with no
34 leading zero required. I've changed the strtoul() call to an
35 atooi() call and removed the misleading leading zeroes on the
36 ASCII octal constants in the code and man pages. Also changed the
37 "Folder-Protect:" example in the man page to something more
38 interesting than a duplication of the default.
40 * When I added my --enable-masquerade option, you'll note that I
41 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
42 options too wordy and I'm not sure why Richard went that route.
43 I've renamed them to just --enable-*, but the old versions will
44 still work as well (they just aren't advertised).
46 * Added a line to the "nmh configuration" output saying whether
49 * Added a new README.developers file. From the file:
51 This file is intended to provide a few tips for anyone doing
52 development on nmh. Developers who learn things "the hard
53 way" about the nmh codebase (as opposed to local info best
54 encoded in a comment) are encouraged to share their wisdom
57 Currently the topics are "autoconf files" and "directory structure".
59 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
61 * Applied, after some finessing,
62 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
64 Here's a patch that allows you to add
66 --with-smtpservers=<some.host.name>
68 to the ./configure command line to set the "servers: " line in
69 etc/mts.conf. Around here, we use "mailhost" so that all
70 machines in the current domain just talk to a central machine
71 and nothing else runs an MTA. Now, I can use
73 --with-smtpservers=mailhost
75 instead of having to remember to fix this by hand (and often
76 forgetting to do so!).
78 * Inspired by Simon's patch, added an --enable-masquerade option
79 to configure. It will set the "masquerade:" line of mts.conf.
80 You may specify a subset of the three types of masquerading, like
81 --enable-masquerade="draft_from mmailid", or leave off explicit
82 arguments to enable all three types.
84 * Alphabetized the --enable and --with options in configure.in and
85 INSTALL and added documentation of the two new options to the latter.
87 * Added new dependency for mts.conf: Makefile. If this isn't
88 done, then when you reconfigure nmh with new values for
89 --enable-masquerade or --with-smtpservers, you'll fail to get an
90 updated copy of mts.conf.
92 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
94 It seems that some MUA's didn't handle y2k very well - ELM
95 seems to be one of them, and Ultrix's DXmail (based on MH!).
96 I've got a few emails this month that look like:
98 575 Jan 00 Xxxxxx Xxxx 3603 ...
100 22+ Jan 00 Xxx Xxxxx 1771 ...
102 The first has "15 Jan 100" as the date and the second has
103 "19 Jan 00" as the date. The following works around this so
104 that scan, show, sortm, etc work ok.
106 I put Simon's patch under the control of a new #define called
107 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
108 acconfig.h about when you might not want to #define it.
110 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
111 lexed on Solaris 2.6. Added missing dependency in
112 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
114 * Added scan.MMDDYY and scan.YYYYMMDD format files.
116 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
118 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
120 With the patch below, you can add lines like:
122 mhshow-suffix-application/msword: .doc
123 mhshow-suffix-application/PostScript: .ps
125 to the mhn.defaults file to append the given suffix to a
126 scratch file. This allows applications which require a
127 certain suffix to run properly.
129 * Removed -force_html from lynx entry in mhn.defaults.sh (I
130 believe older versions of lynx lack that option) and added
131 "mhshow-suffix-text/html: .html".
133 * Modified username_extension masquerading to only use the
134 extended address on generated [Resent-]From: lines and SMTP
135 envelope From:. With Neil's original implementation, nmh's global
136 idea of the username was changed, which would result in inc lying
137 and saying you had no new mail because it was looking for a
138 mailbox called, for instance, "dan-nmh" (where username was "dan"
139 and $USERNAME_EXTENSION was "-nmh").
141 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
143 There's a wrap-around problem that affects the implementation
144 of Zeller's congruence in dtime.c. This causes the day-of-week
145 calculations to fail for dates after Feb 29, 2000 (probably up
146 until some year far in the future).
148 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
150 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
152 I finally tracked down the problem in msh that was causing
153 errors whenever I tried to examine a 'mmdf' style mailbox.
155 It turns out that not enough memory was being allocated with
156 calloc(), causing memory pointers to be overwritten and
159 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
161 * Changed the new "plussed_user" option to mts.conf's
162 "masquerade:" to "username_extension" after getting feedback from
163 qmail users, who use '-' as a separator rather than '+'. Removed
164 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
165 which needs to include the appropriate separator for your MTA
166 ('-', '+', or whatever) as its first character.
168 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
170 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
172 * Added a note to DIFFERENCES stating that it's out-of-date
173 (Richard was the last one to update it) and that we should
174 consider only documenting incompatibilities with MH there.
176 * Implemented (and documented) a third kind of username
177 masquerading: "plussed user" masquerading. This one was suggested
178 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
179 "plussed user" feature, where mail sent to <user>+<string> will be
180 delivered to <user>. When it's enabled, it's controlled by the
181 $USERPLUS environment variable. How is it enabled? Well, that
184 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
185 changed it so that rather than being a boolean, it can be set to
186 any combination of the three values "draft_from", "mmailid", and
187 "plussed_user". Thus it is now possible to enable the three types
188 of masquerading individually.
190 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
191 where if it was turned on, ','s would no longer be considered
192 GECOS field delimiters.
194 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
196 * Changed the GECOS-field '&' translation behavior to be
197 controlled by the BSD42 #define rather than GCOS_HACK, since it's
198 apparently always appropriate on OSes where BSD42 is #defined, and
199 never appropriate on any other OSes. Thanks to Kimmo Suominen for
200 responding to my "What is this code here for?" comment in mts.c
201 and explaining the feature.
203 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
205 * Upped the version number to 1.0.3+dev (ideally this should be
206 done by whoever makes a release tar file, immediately after doing
209 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
210 patch, posted to comp.mail.mh, which he says prevents loss of mail
211 when inc'ing into a full filesystem.
213 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
214 so that stamp-h.in will be different each time configure.in and
215 related files are changed, making it easier to check it in (which
216 is necessary to prevent unnecessary autoconf calls).
218 * My declaration of initgroups() in slocal.c to eliminate the "no
219 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
220 use AC_EGREP_HEADER to see where initgroups() is declared, if
223 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
225 * Fix security hole in mhshowsbr.c which allowed untrusted shell
228 * Released nmh 1.0.3.
230 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
232 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
233 be surrounded by single quotes, as a shell is not spawned when
234 just saving files, and the filenames will end up with literal
235 quotes embedded in them.
237 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
239 * Whoever originally added the -help switch to all the commands
240 got too cute and had the option itself print out as "-(help)" in
241 the -help output. I guess the idea was to make reference to the
242 fact that clearly you know about the -help option since you're
243 currently looking at its output. I think it's a bad idea to
244 overload the meaning of the parentheses, however -- they're
245 supposed to indicate what abbreviated prefix of the switch you're
246 allowed to specify. It doesn't make sense to show that you're
247 allowed to "abbreviate" the switch to its entire length.
249 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
251 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
253 The following patch fixes a problem with requesting a
254 service key for a machine that has multiple 'A' records. It
255 also makes "-kpop" a command line option, for users who
256 would like to use both "kpop" and "pop".
258 Did no testing of the new features, as I don't have access to a
261 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
263 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
265 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
267 * All %-escapes in mhn.defaults that actually expand to something
268 should be surrounded by single quotes. Added quotes to the ones
269 in mhn.defaults.sh that were missing them.
271 * Added check for lynx to write mhshow-show-text/html line in
274 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
276 * makedir() had multiple bugs dating back to MH. An octal
277 constant was apparently being interpreted as decimal, resulting in
278 directories with no user read or execute permissions, making
279 nested directory creation fail. And there wasn't even an
280 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
281 in .mh_profile) on the outer directories of a nested directory.
283 * A second `make install' would always fail because the check for
284 whether mh_profile.5 existed was written incorrectly.
286 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
288 * Added documentation on both types of masquerading to post's man
291 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
293 * Doug's portability fix of my setgid inc autodetection had a
294 caching bug -- if you re-ran configure, uip/Makefile would be
295 corrupted, and installation would bomb out on OSes where inc needs
298 * Implemented a new kind of email address masquerading. Usually,
299 when a user writes a custom "From:" header in a draft, nmh uses it
300 rather than generating one. However, the user's true address is
301 used in the SMTP envelope "From:" and is revealed in the "Sender:"
302 header. Now, when mmailid is set to non-zero, the envelope
303 "From:" uses the address specified in the draft "From:" header,
304 and there is no "Sender:" header. This is useful when sending on
305 behalf of a remote POP3 account or when remote mail robots
306 incorrectly use the envelope "From:" in preference to the body
307 "From:". This processing has only been implemented for post, not
308 for the undocumented spost (which was already missing some "From:"
309 processing that post has).
311 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
313 * Got rid of the rest of the gcc -Wall warnings that I didn't have
314 time for on 1999-07-15 (and, it would seem, some new ones people
315 introduced since then). The primary ones were the warnings that
316 default prototypes were being used for [v]snprintf() and
317 str[n]casecmp(). As of right now, there are _no_ compilation
318 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
321 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
323 * Move mhtest from bindir to libdir.
325 * Move sendfiles from libdir to bindir.
327 * Updated sendfiles manpage to reflect this change.
329 * Added documentation for -build and -file switches to repl and
330 forw manpages (patch from Peter Maydell).
332 * Fixed interaction between specifying -cc in profile and -group on
335 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
337 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
338 not unanimous support for my proposed even/odd release/developer
339 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
342 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
344 * Upped the version number to 1.0.3. If we don't do this, then
345 when people report bugs against 1.0.2, we won't know "which" 1.0.2
346 they're talking about (since the development source is publically
347 available via CVS). I think the Linux kernel version numbers are
348 a good model, so the next time we roll a tarball, it should be
349 version 1.0.4 (or higher -- anyhow, an even-numbered version).
351 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
353 * Released nmh-1.0.2.
355 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
357 * Added check for whether "libtool" is in fact gnu libtool. If
358 it is, it is not used. This is the wrong behavior. If vendor
359 XYZ later on decides to create yet another libtool, we'll be
360 caught again. This works for now.
362 * Minor updates to MACHINES refering to Mac OS X.
364 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
366 * Added check for "libtool" (a ranlib type tool for Mac OS X)
367 and modified Makefiles so that nmh will build under Mac OS X.
369 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
371 * Changed repl defaults to partly revert to MH behaviour,
372 "-cc all" is now only implied with -group.
374 * The replcomps template includes cc: header again (as in MH).
376 * Updated repl man page to reflect these changes.
378 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
380 * Tweaked configure to handle Solaris and SunOS after the BIND
381 changes. Both need more cleanup.
383 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
385 * Removed BIND define and replaced it with a check for
386 gethostbyname (to determine if the host is DNS aware) and a
387 check for sethostent. This appears to be the right thing to
388 do, but there is no explanation of the reasoning behind the
389 BIND define in the code and it appears to have been used for
392 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
394 * Updated manpages Makefile to link mh-profile.5 to
395 mh_profile.5 after installation. Suggestion from Richard Cohen
396 <richard@jubjub.demon.co.uk>.
398 * Modified configure.in to check for _IO_write_ptr and libio.h
399 to determine whether to define LINUX_STDIO instead of using
402 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
404 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
405 multiple machines in the past where the mail spool was a symlink
406 to a directory on another device with more free space.
408 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
410 * Fixed a portability problem in Doug's fix of a portability
411 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
413 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
415 * Added config.sub and config.guess to the list of files to be
418 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
419 added if a list of addresses was split over several header lines.
421 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
422 macros, regardless of platform.
424 * Allow q to quit mhshow, and n to skip to next part. Patch from
425 Kimmo Suominen <kim@tac.nyc.ny.us>.
427 * Modified mhstore to recognize attachments created by sendfiles
428 with x-conversions=gzip.
430 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
432 * added explicit cast to long from time_t for tclock in
435 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
436 it's needed for ioctl() anyway. This prevents a warning about
437 implicit definition of ioctl().
439 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
440 "User Configuration" section of config.h (moved @TOP@ in
441 acconfig.h) so they're easier to find, should someone actually
442 want to mess with them.
444 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
446 * updated Makefile.in so it recognized COMPLETION-TCSH and
447 COMPLETION-ZSH (only used in make nmhdist).
449 * added prototype for ruserpas to <h/prototypes.h>. Fixes
450 warnings in mhparse.c and mhbuildsbr.c.
452 * added include checks for <time.h> and <sys/time.h> to
453 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
454 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
456 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
457 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
458 warnings about implicit definition of mts_init().
460 * added <grps.h> to slocal.c to prevent warnings about
463 * added <h/signals.h> to prevent warning about missing SIGNAL
466 * added function prototypes to smtp.c, whatnowproc.c,
467 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
470 * explicitly declared mbx_style in mshcmds.c and lused in
471 fmtdump.c as type static int instead of just static to
474 * various code cleanups to prevent ambiguous statements
475 (brackets for if/thens and parens for complicated if
479 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
481 * commented out _cleanup() in mf.c because it's the only
482 location in all of the source code where it exists. It was
483 preventing compilation on at least linux.
485 * Added check for <db1/ndbm.h> which is the new location where
486 linux systems appear to be stuffing this header file.
488 Thu Sep 9 23:15:49 1999 Doug Morris <doug@mhost.com>
490 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
492 * added mh_profile SEGV patch from Richard Cohen
493 <richard@jubjub.demon.co.uk> that prevents crashing when
494 mh_profile doesn't end in a newline. A similar patch was
495 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
497 * fixed bug in associated with MAILGROUP #define (group "mail"
498 is not universal) -- hard to believe, but true.
500 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
502 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
504 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
506 * Automated #define of MAILGROUP and installation of inc as setgid mail
507 when the mail spool directory isn't world-writable.
509 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
511 * slocal -debug used to leave a file in /tmp for each message
512 processed. Very bad for folks with slocal -debug in their .forward!
514 * Got rid of a ton of compilation warnings. Most were "junk"
515 warnings due to the use of gcc -Wall (without -Wno-parentheses),
516 but a few represented real bugs. There remain many warnings to be
517 tackled that are due to missing function prototypes (e.g. snprintf()).
519 * Default rcvdistcomps no longer puts a copy of all outgoing
520 messages in outbox. Added an rcvdistcomps.outbox that does.
522 Sat Jun 9 12:22:47 1999 Doug Morris <doug@mhost.com>
524 * Updated configure to check for mkstemp (available on OpenBSD) and
525 substitute it for mktemp if available.
527 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
529 * Added config.sub and config.guess and updated acconfig.h and
530 configure.in to automatically detect system type and set the
533 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
535 * Released nmh-1.0.1.
537 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
539 * Fixed flist to properly deal with relative folder names.
540 Problem noted by Jerry Peek <jpeek@jpeek.com>.
542 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
543 well as the Kerberos 5 compat libraries. Based on a patch from
544 Assar Westerlund <assar@sics.se>.
546 * Added a check in configure.in to test if modf is in libc and
547 link with libm if not. This is needed by at least Digital UNIX.
548 Problem pointed out by Kevin Oberman <oberman@es.net>.
550 * Fix a bug from the "mhn -show" to "mhshow" renaming that
551 made the "list" command in whatnow not work for some users.
552 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
554 * Replaced "extern int errno" with "#include <errno.h>" in a
555 number of files. Suggested by Stephen Wilson Bailey
558 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
559 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
561 * Fixed a segmentation fault in inc. Patch originally from Ruud de
562 Rooij <r.c.m.derooij@twi.tudelft.nl>.
564 * Allow display of 8bit encoded messages. From Kimmo Suominen
567 * Fixed repl to not add line breaks in the middle of long
568 addresses when building a reply. From Ruud de Rooij
569 <r.c.m.derooij@twi.tudelft.nl>.
571 * Added -library switch to spost so it can parse user aliases like
572 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
574 * Changed configure.in's check for sigsetjmp to properly deal
575 with systems like Linux where it is a macro. From
576 <elleron@servtech.com>.
578 * Fixed a bug in whatnow that could cause it to sometimes exit
579 without prompting the user. Based on a patch by Richard Geiger
582 * Added code to deal with SIGPIPE in mhl so it doesn't print
583 "Broken pipe" if you quit out of the moreproc.
585 * Documentation: Added a note to MACHINES about Irix make. Added a
586 pointer to the online copy of the MH book in INSTALL. Added
587 some additional information to the whatnow and packf man pages,
588 suggested by Jerry Peek <jpeek@jpeek.com>.
590 * Updated INSTALL, FAQ, etc to not refer to Richard as the
591 maintainer or math.gatech.edu as the home any more.
593 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
597 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
598 mbx_open so that the mode of zero length maildrops
599 would not be changed.
601 * Replaced the substitute version of snprintf() with the
602 one from the Apache web server.
604 * Changed to default mode for creating new messages to 0600
605 (this should have been done a long time ago).
607 * Changed "flist" to handle searching for multiple sequences
608 for each folder. Also flist will now correctly split
609 Unseen-Sequence if it consists of multiple sequences.
611 * Added new switches `-unlink' and `-nounlink' to "refile".
613 * Added new switches `-unlink' and `-nounlink' to "rmm".
615 * More cleanups of slocal output. Changed adorn() to
616 send to stdout, instead of stderr (to match rest of
619 * Merged mbx_create() into mbx_open, so that creating and
620 opening a nonexistent maildrop is done atomically. This
621 removes a bad race condition.
623 * Fixed bug that caused slocal to be unable to save to MMDF
626 * Added new wrapper function usr_folder() to slocal.c to
627 handle adding message to folder (currently, it still uses
628 usr_pipe() to call rcvstore).
630 * seq_list() checks for empty folder before scanning for
631 sequence information.
633 * num_digits() in flist.c and folder.c now returns correct
634 value for 0. Also added sanity check.
636 * folder_delmsgs() now correctly decrements internal message
639 * Don't attempt to read sequence information if folder
642 * Split seq_read into seq_public and seq_private.
644 * Small change to sigmsg.awk, since newer versions of gawk
645 interpret 034 as octal.
647 * In flist, don't scan for sequence information in empty folder.
649 * Updated mhn.defaults.sh to output profile entries for mhshow,
650 mhstore, and mhbuild.
652 * Changed configuration parameter "mhn-access-ftp" to
653 "nmh-access-ftp". Updated man pages
655 * Moved the code in InitMultipart to reverse the order of the
656 parts in a multipart, into its own function "reverse_parts()".
658 * Changed code in mhbuildsbr.c to store unencoded content
659 in the c_cefile structure when building.
661 * Changed code in mhoutsbr.c to look for unencoded content
662 in the c_cefile structure when outputing message.
664 * Changed configuration parameter "mhn-cache" and
665 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
666 since it is used in mhstore, mhlist, and mhshow. Updated man pages
668 * Change configuration parameter "mhn-storage" to
669 "nmh-storage", since it is now used in mhstore, mhlist,
670 and mhshow. Updated man pages
672 * Add autoconf support for KPOP (kerberized pop).
674 * Add autoconf support for Hesiod.
676 * Split routines to output a message given a Content structure
677 (output_message, output_content, write7Bit, etc..) to a new
680 * Split output_content(), into output_content() and build_headers().
682 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
683 list of header fields, rather than reopening the message.
685 * Added free_header() to mhfree.c to free structures containing
686 header field information.
688 * Changed get_content() to use the linked list of header fields
689 when parsing the various MIME headers (Content-XXX).
691 * Changed get_content() to store linked list of header field
692 values when parsing a content.
694 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
695 routines in mhcachesbr.c to handle the content cache.
697 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
698 cache_content) into new file mhcachesbr.c.
700 * More calls to sprintf/strcpy (primarily in mhparse.c
701 and mhbuildsbr.c) converted to snprintf/strncpy.
703 * When a message is displayed with `mhshow', it is now
704 removed from the "unseen" sequence.
706 * Change the default "showmimeproc" to "mhshow".
708 * Split "mhn -show" off into separate command "mhshow".
710 * Split "mhn -store" off into separate command "mhstore".
712 * Split "mhn -list" off into separate command "mhlist".
714 * Add sanity checks to context_find(), context_replace(),
715 and context_del(), to abort if context file hasn't been
718 * Add calls to context_read(), to the beginning of all nmh
719 commands (instead of being called indirectly by context_find).
721 * Changes the "substitute" version of vsnprintf/snprintf for
722 operating systems without native versions, to just call the
723 native vsprintf(), and ignore the buffer length. This is
724 faster, but less secure than the previous version that used
725 temporary files. This should only be a problem for systems
726 which do not have a native snprintf(), and require `inc' to
729 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
731 * Changes client() routine to take additional parameter, which is
732 the buffer length of the parameter "response". Then added
733 buffer length checks for this parameter.
735 * Changed getws() to get_fields(), since that is apparently the
736 name of a wide character version of gets() on some archetitures.
738 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
740 * Change the code in most of the commands that take multiple
741 message names/sequences/ranges on the command, such that
742 the msgs array is expanded dynamically. This removes most
743 of the limits on the length of command lines.
745 * Add additional parameter to copyip(), to specify the
746 maximum number of strings that can be copied (security
749 * Create new function getarguments(), to massage the argument
750 vector before parsing it (add any arguments from your
751 profile to the beginning of the argument vector). This
752 also removed the general limit on the number of command line
755 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
759 * Added a new command "delete", that is available during
760 a "whatnow" session. It is equivalent to "quit -delete".
762 * Added another parameter to editfile (in whatnowsbr.c),
763 that controls whether editfile should remember the last
764 program that was exec'ed. This way the whatnow command
765 "mime", will not be re-executed if "edit" is later given
768 * Changed whatnowsbr.c, so that whatnow doesn't abort if
769 mhbuild returns an error.
771 * Added parameter to sendsbr(), so you may specify whether to
772 rename the draft file.
774 * Pass delay time to splitmsg() as a parameter, rather than
775 use a global variable.
777 * Moved code to rename draft file after sending message from
778 splitmsg and sendaux, to sendsbr.
780 * Removed all the code in viamail to split messages and then
781 mail them. Replaced this with the standard sendsbr.c routines.
783 * Changed sendsbr(), so that when splitting messages into
784 messages of type "message/partial", the header fields that
785 are copied are more compliant with RFC-2046.
787 * Fixed mhbuild to track temporary files better. They are
788 now correctly removed when mhbuild aborts.
790 * Created a new man page for "sendfiles". The information
791 about "mhn -viamail" in the "mhn" man page was moved to
794 * Changed the name of the "viamail" shell script to
795 "sendfiles". Modified "sendfiles" to use the new
798 * Moved the functionality for "mhn -viamail" out of mhn,
799 and into a separate executable called "viamail".
801 * When storing MIME contents to a folder using mhn -store,
802 they are now accumulated in a temporary file, and then added
803 to the folder using folder_addmsg().
805 * Moved code to save content to a folder from store_content
806 to new function output_content_folder.
808 * Moved code to save content to file from store_content to
809 new function output_content_file.
811 * Moved code to parse storage format string from store_content
812 to new function parse_format_string.
814 * Fix copy_some_headers() in mhstoresbr.c, so that the
815 correct header fields in the first enclosing message/partial
816 will be copied (according to RFC2046), when using mhn -store
817 to reassemble messages of type message/partial.
819 * Fixed bug to openFTP() in mhparse.c, that caused the
820 tmp file to not be removed, when transferring a
821 message/external file from ftp.
823 * Moved the code in mhparse.c to process -auto switch (scan
824 contents for the attribute "name"), to a new function
825 "get_storeproc" in mhstoresbr.c.
827 * Moved routines to free data structures related to MIME
828 content from mhparse.c and mhbuildsbr.c, to new file
831 * Moved code to show/display MIME content into new
834 * Moved code to store MIME content from into
835 new file mhstoresbr.c
837 * Moved code to parse MIME content into new
840 * Moved code to list information about MIME content
841 into new file mhlistsbr.c.
843 * Move part_ok(), type_ok(), content_error(), flush_errors(),
844 and set_endian() to new file mhmisc.c.
846 * Start to isolate the code to show, list, and store MIME
847 messages. One side effect is that only one flag (-show,
848 -list, or -store) can be used at a time now.
850 * mhn -store -auto wasn't storing file in correct directory.
852 * Removed a few dead variables from sbr/ruserpass.c
854 * move code for creating tmp files, and renaming the
855 the composition draft in mhbuild, from build_mime()
858 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
859 the -[no]auto switch (which isn't used in mhbuild).
861 * split mhn.c into mhn.c and mhnsbr.c (name later changed
864 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
866 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
870 * Added (unlisted) options [no]dashstuffing to send, post,
871 and whatnow to determine whether to do RFC934 quoting
872 (dashstuffing) for encapsulated BCC messages. The default
873 is still the same (dashstuffing).
875 * Changed the undocumented feature "nodashmunging" in forw
876 and mhl, into the documented feature "nodashstuffing". The
877 default for forw, is still "dashstuffing" for backward
878 compatibility, although I don't believe that bursting
879 RFC934 digests is very common anymore.
881 * Added an option to define REALLYDUMB in the default config.h.
882 But it is not on by default.
884 * moved creation of config file mts.conf from zotnet/mts
885 to etc. This simplified the Makefile in zotnet/mts.
887 * simplified directory support/general to etc.
889 * removed unneeded directory support/bboards.
891 * split getusername() into getusername() and getuserinfo().
893 * Changed getusr() routine to getusername().
895 * Slight cleanup in folder_pack.c on code that records the new
896 number of the "cur" message when packing.
898 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
902 * Change install process, so that hard linking the correct mts
903 library to libmts.a, is not necessary. The final link process
904 uses the original name of the library.
906 * Fixed bug in flist.c and folder.c, so that symbolic links which
907 point to directories, will not decrement the number of directory
910 * Split the function list_content (in mhn.c and mhbuild.c) into
911 list_content and list_debug.
913 * Don't pack (folder -pack) an empty folder.
915 * Exit gracefully in flist.c, if no sequence is specified,
916 and no "Unseen-Sequence" is given in nmh profile.
918 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
922 * Small clarification to the man page for `ali'.
924 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
925 are given, that order doesn't matter.
927 * Fix bug in seq_list.c when realloc'ing for
930 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
934 * Add new section on "Transfer Encodings" to man page for mhbuild.
936 * In mhbuild.c, split compose_content into compose_content
937 (parse and execute composition string), and scan_content (scan
938 content, decided transfer encoding, check for clash with boundary
939 string). I did a good amount of rearranging of this code.
941 * Moved definitions for data structures for parsing MIME
942 messages from mhn.c and mhbuild.c to a new include
945 * Small amount of rearranging in sendsbr.c
947 * Small changes to MAIL.FILTERING file.
949 * Add the file MAIL.FILTERING to nmh distribution.
951 * Add line to packf so that if message begins with
952 "X-Envelope-From:" field, it is converted to "From ".
954 * Fix packf to add "From " line to beginning of message,
955 even if Return-Path doesn't exist.
957 * Add note to MACHINES file that on Linux, configure
958 doesn't find the functions sigsetjmp/siglongjmp.
960 * Fix configuration for machines that don't have (or find)
961 sigsetjmp/siglongjmp.
963 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
967 * Add a configure check for sigsetjmp. Add some conditional
968 #define's in h/signals.h in case it's not found.
970 * Added additional notes about -auto switch in mhn man page.
972 * Added note about MM_CHARSET environment variable to
973 mh-profile(5) man page.
975 * Fix signal problem in mhn.c (change setjmp/longjmp to
976 sigsetjmp/siglongjmp).
978 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
980 * Released nmh-0.22-pre1.
982 * Changed the first line in mhl.format from
983 " -- using template mhl.format -- " to a blank line.
985 * Added note about automimeproc to mh-profile man page.
987 * Reorganize the main entry point for parsing a MIME message
988 or file in mhn. Add new function parse_file() as new main
989 entry point for parsing MIME files.
991 * Add note to mhn man page, that "mhn -file -" will accept the
992 source message on the standard input.
994 * Changed a sanity check in folder_realloc that was too strict.
996 * -norfc934mode is now the default for mhbuild,
997 rather than -rfc934mode.
999 * Fix mhbuild, so that Content-Description and RFC-822 comments
1000 from #forw directive will be correctly included if there is
1003 * Change mhn to correctly default parts of multipart/digest to
1004 message/rfc822 (leftover code from rfc934mode was removed).
1006 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1009 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1011 * Released nmh-0.21.
1013 * If the file given to mhbuild is "-", then accept the draft on
1014 standard input, and output the MIME message to standard output.
1016 * Cleaned up code in mhbuild.c that decides what transfer
1019 * Cleaned up code in mhbuild.c that decides what character set
1020 to use for text contents.
1022 * Removed old hpux specific code from zotnet/tws/lexstring.c
1024 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1026 * Released nmh-0.21-pre2.
1028 * Added the "decode" variable to mhl.format and mhl.header.
1030 * Added new variable "decode" to mhlsbr.c to decode text in
1031 header fields as per RFC-2047.
1033 * Make sure that when decoding RFC-2047 header fields, that any
1034 spaces at the ends of the encoded text are not ignored, but the
1035 spaces between encoded word are.
1037 * Removed #ifdef's for MIME. MIME support is always compiled in.
1039 * scan/inc will now decode both Subject and From lines as
1040 RFC-2047 encoded header fields.
1042 * Added new function write_charset_8bit() to sbr. It returns
1043 the character set to use for 8bit text in composition draft.
1044 Changed mhbuild to use this function.
1046 * Split mhn man page into man pages for mhn and mhbuild.
1048 * mhn -show will only now only use default method for content
1049 of type plain, if it is NOT a part of a multipart/alternative.
1051 * Split mhn -build into mhbuild. Did some code cleanup.
1053 * Added support for %(decode) to fmtdump.c.
1055 * check_charset() now accepts US-ASCII as a subset of any
1056 ISO-8859-X character set.
1058 * Changed the default "showproc" to mhl, instead of the
1061 * When reading file into mhn composition file, only need read
1062 permissions, not write permissions.
1064 * Added own version of strcasecmp to distribution, since
1065 nmh calls it frequently with NULL pointers (ughh).
1067 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1070 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1072 * Released nmh-0.21-pre1.
1074 * If a message is missing charset parameter to text/plain, show
1075 will assume US-ASCII, rather than just calling showmimeproc.
1077 * Change show.c and mshcmds.c to use check_charset to see if text
1078 message contains valid character set.
1080 * Added new scan format file "scan.nomime" to support/general
1081 that doesn't do any RFC-2047 decoding.
1083 * Modified all the scan format files in support/general to do
1084 RFC-2047 decoding of Subject field.
1086 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1087 ignore whitespace between two valid encoded words, but not
1088 between an encoded word and normal text.
1090 * Created new file sbr/check_charset.c. Moved code from
1091 fmt_rfc2047.c to check for valid character set to this file.
1093 * Added format escape %(decode) to decode contents of "str" register
1094 as a RFC-2047 header field.
1096 * The command install-mh now recognizes the switches -version
1099 * Added a new argument to print_help.c to decide whether to
1100 print profile entries (needed for install-mh to prevent weird
1103 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1104 is initialize to max (mp->lowmsg, 1) rather than always 1.
1106 * Changed macros for sequence/attribute manipulation so that
1107 message status array doesn't need to always start at 1.
1109 * Small cleanups in folder_realloc().
1111 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1113 * Released nmh-0.20.
1115 * Added configure option --with-pager=PAGER.
1117 * Added configure option --with-editor=EDITOR.
1119 * Changed the default format file for mhl (mhl.format) to
1120 also ignore (not display) the header fields Content-Type,
1121 Content-Transfer-Encoding, and Content-ID
1123 * Fixed core dump in addrsbr.c when using %(proper) format function
1124 and the To: line was missing.
1126 * Added the file ZSH.COMPLETION to the distribution.
1128 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1130 * Released nmh-0.20-pre2.
1132 * Added new switch -snoop to both `msgchk' and `inc', so you can
1133 watch the POP transaction.
1135 * Changed "replgroupcomps" to check for Mail-Followup-To header
1136 first, and use it if available.
1138 * Changed "replcomps" to check for Mail-Reply-To header
1139 first, and use it if available.
1141 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1143 * Released nmh-0.20-pre1.
1145 * Changed seq_list.c to dynamically enlarge the buffer for
1146 collecting the message ranges in a long sequence line.
1147 This should remove the last hard limit on the size of a
1150 * Changed seq_read.c so that can read long sequence lines.
1151 It will use multiple calls to m_getfld() when m_getfld()
1152 returns the state FLDPLUS.
1154 * Changed brkstring.c to dynamically add more space for pointers
1155 if necessary. This is needed when splitting up large sequence
1158 * Did some small cleanups in seq_save.c.
1160 * Added new switches `-[no]unseen' to rcvstore, to control
1161 whether new messages are added to Unseen-Sequence.
1163 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1165 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1166 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1168 * Changed "replcomps" to not include CC and TO lines so that
1169 that reply message is only directed at the author of the
1170 message to which you are replying.
1172 * Added new switch `-group' to command repl, which causes repl
1173 to use new forms file "replgroupcomps". This is intended for
1174 making group replies.
1176 * Removed #ifdef for ATHENA.
1178 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1180 * Released nmh-0.19.
1182 * Fix repl,forw so that switch `-form file' will not abort
1183 as ambiguious (silly mistake on my part).
1185 * Cleaned up the mhn man page. Added info about a few escapes
1186 for the formatting/display strings that were not documented
1187 (%%, %t). Moved the BNF grammar for the mime composition file,
1188 to the end of the man page.
1190 * Added the options -[no]format to the command repl. The
1191 switch `-format' will filter the message to which you are
1192 replying with the standard message filter "mhl.reply", which
1193 is now included in the distribution. The `-noformat' option
1194 will negate the use of -format or -filter and not include
1195 the message to which you are replying in the draft.
1197 * Did some cleaning and reorganization on many of the man
1200 * Added debugging switch `-debug' to mhparam, which displays
1201 the values of all `procs' (and some other misc configuration
1202 info) that nmh keeps in global variables.
1204 * When using `refile -preserve', if a conflict occurs, then use
1205 the next available number above the message number you wish
1208 * In forw.c, split the code for creating MIME style forwarding
1209 out of copy_draft, and into copy_mime_draft.
1211 * Move routines in mark.c to print sequences, into new
1212 file sbr/seq_print.c
1214 * flist will now update the current folder.
1216 * Added the switches -[no]fast to flist, to replace
1217 -[no]total. The previous switches are still accepted
1218 but now undocumented.
1220 * More reorganization in flist of the code for
1223 * The command "flist +foo -all" will now scan the folder
1224 "foo" and all its 1st level children.
1226 * Add missing include file <h/mh.h> to sbr/snprintf.c
1228 * Fix alarm bug in rcvtty, so that when it calls external
1229 process, the alarm is never longer than 30 minutes.
1231 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1233 * Released nmh-0.18.
1235 * Fixed bug in mark, so that "mark -list -seq foo" will
1236 correctly indicate if "foo" is a private sequence. I found
1237 this bug mentioned in Jerry Peek's book.
1239 * Simplified the code in seq_setcur(), since seq_addmsg() now
1240 retains the public/private status of sequences.
1242 * Changed sequence handling so that if the switches -public
1243 or -nopublic, are not specified for the commands mark, pick,
1244 or rcvstore, then existing sequences will retain their
1245 previous public/private status.
1247 * mhparam now handles the mh-sequences profile entry
1250 * flist -all will now also check readonly folders (for
1253 * Improve the leaf optimization for folder command.
1254 It will now track the number of directories in a folder,
1255 and stop stat'ing files once it has hit all the subfolders.
1257 * Renamed m_getfolder to getfolder. Changed getfolder to
1258 take option to determine whether it should get current
1259 folder, or just default folder (Inbox). Changed rcvstore,
1260 inc, and rmf to use the new getfolder.
1262 * flist now indicates if a sequence is private.
1264 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1265 wait for stopped processes.
1267 * conflict will dynamically allocate space for group names,
1268 so it can now handle system with more than 100 groups.
1270 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1272 * Released nmh-0.18-pre4.
1274 * Check if we have enough message status space, before we
1275 call folder_realloc() in burst, mhpath, and m_draft().
1277 * mhn will now correctly identify a formatting string of "-"
1278 for the option -store, and send content to stdout.
1280 * Change the way that memory for message status is
1281 allocated. It is dynamcially allocated separately from
1282 the folder/message structure. This required changing
1283 folder_read.c, folder_realloc.c, folder_free.c.
1285 * Removed all the MTR code (experimental code for message
1288 * Renamed m_readfolder.c to folder_read.c and simplified
1291 * Renamed m_freefolder.c to folder_free.c.
1293 * Add function trim() to slocal.c to pretty print
1294 the debugging output.
1296 * Changed the name of m_packfolder() to folder_pack().
1297 Changed the name of m_remsg() to folder_realloc().
1299 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1301 * Released nmh-0.18-pre3.
1303 * Changed installation to add `flists' which is hard linked
1304 to `flist'. This is a equivalent to `flist -all'.
1306 * For flist, -showzero is on by default.
1308 * Major changes to flist. Default is now for flist to search
1309 current folder. The switch `-all' is now used to specify
1310 searching all top level folders. The new switch `-showzero'
1311 is used to print out folders that don't contain any messages
1312 in the given sequence.
1314 * Split BuildFolderList in flist.c into 2 functions
1315 (BuildFolderList, BuildFolderListR). Changed these functions
1316 so that flist now does better leaf optimization, and will stop
1317 stat'ing directory entries when it knows it has hit all the
1318 subdirectories of a given directory.
1320 * Reorganized code in folder.c, so that all relevant folders
1321 are scanned first and information recorded. Then all the
1322 folder summaries at printed out at one time.
1324 * Made the options of folder(s) more orthogonal. Now
1325 "folder -all -noheader -nototal" will do the right thing.
1327 * Added `-noall' switch to folder, for completeness.
1329 * Changed the default mode for creation of new folders
1332 * Slightly changed the format for flist. It now indicates
1333 if a folder is current. Also the width of the various
1334 fields are now calculated at runtime.
1336 * Changed the format for folder(s). Folder names
1337 are now left justified. The width of the various fields
1338 are calculated at runtime.
1340 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1342 * Released nmh-0.18-pre2.
1344 * Add paragraph to man page for install-mh and to INSTALL file
1345 about checking for global mh.profile.
1347 * Renamed m_find() to context_find().
1348 Renamed m_replace() to context_replace().
1349 Renamed m_delete() to context_del().
1350 Renamed m_update() to context_save().
1351 Renamed m_getdefs() to context_read().
1352 Renamed m_foil() to context_foil().
1354 * Change rcvstore to use routine folder_addmsg(), instead of
1355 adding message to folder itself.
1357 * Changed refile, so that if the switch -preserve is used,
1358 and a conflict occurs for a particular folder, then folder_addmsg()
1359 will just use next highest available number for that folder,
1362 * Make folder_addmsg() more robust. It will make repeated
1363 attempts to link file into folder if link returns with
1366 * Fix bug, so that that if forking sendmail, HELO will be sent
1367 unless clientname: option is defined but empty (so now it
1368 is the same as the direct smtp code).
1370 * Changed sprintb to snprintb (now we pass the buffer length
1371 to new routine). Changed code to use new function.
1373 * Added snprintf to sbr. Added configure check to build it
1374 if you don't have a native version (but haven't changed much
1375 code to use it yet).
1377 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1379 * Released nmh-0.18-pre1.
1381 * Fixed alarm bug in slocal, so that alarm is never
1382 called with a value larger than 30 mintues.
1384 * Fixed race condition in rmm and refile, so that
1385 context is updated before external rmmproc is called.
1387 * Removed all the OVERHEAD code.
1389 * Move code to add message to folder from refile.c
1392 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1394 * Did some rearranging of the internals of inc.c.
1396 * Make -inplace the default for anno, forw, dist, and repl.
1398 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1400 * Created new directory mts/sendmail for direct sendmail
1401 interface (although it currently still uses SMTP).
1403 * Removed all the TMA (trusted mail agent) code
1405 * Removed all the TTYD (terminal access daemon) code
1407 * Removed all the MF (uucp filtering) code.
1409 * Removed all the code for BERK.
1411 * Removed all the code for stand-alone delivery (MHMTS).
1413 * Split the file mts/sendmail/smail.c into sendmail.c and
1414 smtp.c. Changed the name of the directory to mts/smtp.
1416 * Changed autoconf to use @sysconfdir@ for location of
1417 configuration files.
1419 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1421 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1423 * Released nmh-0.17.
1425 * MAKEDEFS weren't passed down to recursive makes correctly.
1427 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1428 of hard-coding "/etc/utmp".
1430 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1433 * Remove configure checks for ulong and ushort. Changed
1434 code to just use unsigned {short, long}.
1436 * Change addmsg function in refile.c to return new
1437 number of refiled message.
1439 * Added check in get_returnpath for empty unixbuf.
1441 * Cleanup of sbr/pidstatus to use more POSIX macros
1442 for return value of wait().
1444 * Change configure to also check /bin for "more".
1446 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1448 * Released nmh-0.16.
1450 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1452 * Added automimeproc, which should replace automhnproc.
1454 * multipart messages will no longer abort for messages
1455 of type 8bit or binary (although we still can't really
1456 deal with binary messages, yet).
1458 * Fix double free of c_storage. From John MacMillan.
1460 * mhn now treats unknown subtypes of "text" as text/plain.
1462 * mhn changed so that specifying mhn-show-multipart, or
1463 mhn-show-multipart/{mixed, alternate, etc...) will override
1464 the use of the internal method for displaying these types.
1465 Previously mhn would always use the internal method for subtypes
1466 mixed, alternate, digest, and parallel (even if an alternate
1467 method was specified in mhn.defaults).
1469 * mhn show treats unknown subtypes of multipart, as type
1470 multipart/mixed (as specified RFC2046).
1472 * mhn checks for the parameter "name" rather than "x-name".
1473 From MH-6.8.4 patch.
1475 * Fix double free of ctinfo in user_content when using
1476 #forw with single message. From John MacMillan (and
1479 * Changed -mhnproc switch for show, to -showmimeproc.
1481 * Changed profile entry "mhnproc" to "showmimeproc".
1483 * Added "mime" option to "whatnow", which calls the program
1484 "buildmimeproc" (default is mhn -build) to process MIME
1487 * Added -build switch to mhn, to process MIME composition
1490 * Did some reorganizing of mhn.c.
1492 * Changed casting in mts/sendmail/smail.c from (char) to
1493 (signed char) so SMTP reply codes work correctly for machines
1494 which used unsigned chars by default.
1496 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1498 * Released nmh-0.15.
1500 * Added new form "scan.unseen" to distribution. It marks messages
1501 which are in any sequence in Unseen-Sequence.
1503 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1505 * Fix sign extension bugs in fmt_scan.c.
1507 * Fix m_atoi.c so that strings ending in non-digit characters
1510 * Split code in burst.c so that finding delimiters of digested
1511 messages and bursting a message into multiple messages are
1512 two separate functions (find_delim and burst).
1514 * Add workaround fo AC_PATH_PROG in configure.in, so
1515 that BSD4.4 machines can find sendmail, vi, more.
1517 * Added "-width" option to rcvtty.
1519 * Change a few variable names in zotnet/mts/client.c since
1520 they conflict with defines on AIX.
1522 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1523 unsuccessful if resulting file is less than 500 lines long
1524 (rather than 10, which was previous value), since AIX
1525 sed gives mangled file of about 200 lines.
1527 * Extract code in rcvstore.c to link message into folder,
1528 and put in own subroutine.
1530 * Extract code in refile.c to link message into folder,
1531 and put in own subroutine.
1533 * Moved code to remove messages from folder into own
1534 routine "folder_delmsgs" in sbr. Changed rmm.c and
1535 refile.c to use new routine.
1537 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1539 * Renamed m_seqok to seq_nameok.
1541 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1544 * Changed m_seqflag to return the number of a sequence rather
1545 than its bit flag. Changed its name to seq_getnum and renamed
1546 file to sbr/seq_getnum.c.
1548 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1551 * Added zero switch to m_seqadd function to zero out bits before
1552 adding message to sequence.
1554 * Renamed function m_setvis to m_setunseen, and renamed
1555 corresponding file in sbr.
1557 * Renamed function m_setseq to m_setprev, and renamed corresponding
1560 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1562 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1563 all selected messages from a sequence.
1565 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1566 selected messages to a sequence.
1568 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1571 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1573 * Renamed function pack_folder to m_packfolder, and moved it
1574 from uip/folder.c into its own file sbr/m_packfolder.c
1576 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1578 * Changed function m_gmsg to m_readfolder. Renamed file
1579 sbr/m_gmsg.c to sbr/m_readfolder.c.
1581 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1583 * Expanded rcvtty man page, and added small patch from
1584 MH-6.8.4 distribution.
1586 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1588 * Released nmh-0.14.
1590 * Comment out configure test and code for tgetent to allocate its
1591 own termcap buffer when passed a NULL argument.
1593 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1595 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1596 to show. Restructured code to handle options to various
1597 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1598 environment variable.
1600 * Added new man page `mh-draft' which documents the
1601 draft folder facility in nmh.
1603 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1606 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1607 fmtcompile.c to fmt_compile.c, and formataddr.c to
1610 * `send -help' wasn't showing the -(no)mime and -split
1613 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1615 * Released nmh-0.13.
1617 * Changed mhpath so it doesn't abort if a message sequence
1618 such as "mhpath all" expands to more than 1000 messages.
1619 Also mhpath now dynamically reallocated space for message
1620 names (The number of command line arguments is still limited
1623 * Did some general restructuring of the code in folder.c
1624 that checks for folder information, and prints it.
1626 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1628 * Changed `folder' to reallocate space for folder names if
1629 necessary. So `folders' can now handle more than 300 folders.
1631 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
1633 * Change configure to use a compile check to see if the tm struct
1634 has tm_gmtoff, rather than using egrep.
1636 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
1638 * Released nmh-0.12.
1640 * Had set_exists and unset_exists macros backwards.
1642 * Released nmh-0.11.
1644 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
1646 * Added documentation to mh-profile.man about the various
1647 `procs' (mhlproc, showproc, lproc, etc...).
1649 * Replace the bit twiddling for SELECTED, UNSEEN, and
1650 mp->attrstats with macros.
1652 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
1655 * Change fstat to stat in m_gmsg.c since Linux wants
1658 * Merge Linux patch sent in by Michel Oosterhof (original
1659 patch from bsa@kf8nh.wariat.org).
1661 * Document an undocumented MH feature. mhn -form mhl.null
1662 will suppress the display of the message header.
1664 * mhparam will now return "mhparam etcdir".
1666 * Add catproc to /config/config.c and use that in show.c
1667 and mshcmds.c, rather than hard coding in /bin/cat.
1669 * Add mhnproc to the list of `procs' in mh-profile.man.
1671 * Add configure test for lorder and tsort commands.
1673 * Commented out the padding in the `msgs` struct in h/mh.h
1675 * Change m_gmsg.c to allocate elements to the `info' array by
1676 500 elements at a time (rather than MAXFOLDERS / 5).
1678 * Add note to man page for mhmail that zero length messages are
1679 not sent. Need to use -body "" to send empty messages.
1681 * zotnet/mts/mts.c : compare character with '\0', not NULL.
1683 * sbr/getcpy.c : assign '\0' to character, not NULL.
1685 * add m_fmsg to most programs in uip so that they explicitly free
1686 folder/message structure when done with folder.
1688 * uip/slocal.c : cleanup processing of sender. Make sure it is
1689 defined even if message is missing "From " line.
1691 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
1693 * Released nmh-0.10.
1695 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
1697 * Add configure check for <locale.h>. Turn on LOCALE support
1700 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
1702 * Reversed previous decision to retain "From " lines in slocal.
1703 The "From " line is now removed from all messages.
1705 * inc now saves the date from the "From " envelope in the
1706 Delivery-Date header for all messages.
1708 * sbr/m_getfld.c: Clean up processing of Return-Path and
1709 Delivery-Date from the "From " envelope.
1711 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
1713 * client.c: cast iaddr to int before comparing return value
1714 of inet_addr with NOTOK.
1716 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
1718 * Grep test for signal names was failing on some OS'es because
1719 of missing tabs in regex.
1721 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
1723 * Released nmh-0.09.
1725 * Move config files and format files to *.old before installing.
1727 * Add configure check for killpg.
1729 * msh.c: include <termios.h> instead of <termio.h> and
1732 * prompter.c: don't include <sys/ioctl.h> anymore.
1734 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
1736 * Added `-mime' and `-nomime' options to `repl'.
1739 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
1741 * ruserpass.c : removed conflicting prototypes.
1743 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
1744 by `mesg' command. Previously only worked on BSD machines.
1746 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
1748 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
1749 than hard coded "/etc/utmp".
1751 * Released nmh-0.08.
1753 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
1754 when accessing ndbm/db file for duplicate suppression, instead of
1755 locking database itself.
1757 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
1759 * Added slocal action `mmdf' to deliver to a file in mmdf format.
1761 * Changed the slocal actions `file' and `>' to always deliver in
1762 mbox (uucp) format rather than be determined by RPATHS config
1765 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
1766 rather than mmdf format.
1768 * slocal now adds Delivery-Date field to all messages (previously it
1769 only added it to messages when delivering them to a file). The
1770 "From " line is now retained on all messages if compiling with
1771 RPATHS, rather than being discarded.
1773 * rcvpack no longer adds the Delivery-Date field to messages.
1775 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
1777 * Removed the script packmbox, since it's functionality has been
1780 * Changed packf so that it uses mbox (uucp) format by default
1781 rather than mmdf format. Added options -mbox and -mmdf to
1782 packf so you can choose the preferred format.
1784 * Changed rcvpack so that it uses mbox (uucp) format by default
1785 rather than mmdf format. Added options -mbox and -mmdf to
1786 rcvpack so you can choose the preferred format.
1788 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
1790 * Changed nmh to use dot locking by default (although you
1791 can still easily change this in config.h).
1793 * Simplified locking code. Removed code allowing setting of
1794 locking type in mts.conf. Now the locking type and locking
1795 directory (if any) can only be set at compile time.
1797 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
1799 * Prefer getting timezone information from tm->gmtoff rather
1800 than tzset and external timezone variable.
1802 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
1804 * Fixed typo in ruserpass.c in the variable toktabs.
1806 * When ruserpass was added to LIBOBJS, it was missing
1809 * Released nmh-0.07.
1811 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
1813 * Add check to configure, so that if ruserpass, or _ruserpass
1814 is not found, build version of ruserpass in sbr.
1816 * Added define's to discard.c, m_getfld.c, and scansbr.c so
1817 the code that manipulates internals of stdio, will build
1820 * Added #define to control whether to compile the simple
1821 built-in FTP client in mhn.
1823 * Added configure check for ushort and ulong. Change code
1824 to use ushort/ulong rather than u_short/u_long.
1826 * A couple of small cleanups in locking code.
1828 * Added configure check for gmtoff element in struct tm.
1830 * Added configure check for tzset.
1832 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
1834 * Released nmh-0.06.
1836 * Removed code for machines that don't have socket
1837 interface (how could they get mail anyway?).
1839 * Removed code for BSD41 machines. I don't think there are
1840 many such machines around anymore.
1842 * Add configure check for function uname, and prefer it
1843 over gethostname. General cleanup of zotnet/mts/mts.c.
1845 * Change all `lseek' calls to use POSIX symbolic constants
1846 SEEK_SET, SEEK_CUR, SEEK_END.
1848 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
1850 * Check lex generated file in zotnet/tws and use
1851 pre-generated version if necessary.
1853 * Released nmh-0.05.
1855 * Change to use reliable signals on all platforms that have
1856 sigaction. Change so that interrupted system calls are
1857 restarted for all signals except SIGALRM. This fixes alarm
1858 handling code in smail.c for BSD based systems.
1860 * Added lorder and tsort commands so that created libs can
1861 be linked in one pass.
1863 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
1865 * Changed pidwait so that while it is waiting for a child,
1866 it should block signals rather than ignore them.
1868 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
1870 * Add checks to configure for dbm_open and -lndbm.
1872 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
1874 * folder -pop and folder -push were freeing some memory too
1875 quickly, which caused the entry popped from the stack to not
1876 become the current folder.
1878 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
1880 * Released nmh-0.04.
1882 * Define ospeed and PC in termsbr.c is OS doesn't have
1885 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
1887 * editfile will create a symbolic link to the altmsg if it
1888 can't make a link, on any machine supporting lstat. Formerly
1889 this would happen only on BSD42 based machines.
1891 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
1893 * traverse (in popsbr.c) wasn't calling va_start before using
1894 variable argument list. Fixes core dump in inc when using POP.
1896 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
1898 * The variable pass in remotemail needed to be set to
1899 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
1902 * inc and msgchk were using -rpop by default when configured
1903 with POP support. Default is now -norpop.
1905 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
1907 * By default, post will now give the SMTP HELO command with
1908 the local hostname. If you specify a hostname with the
1909 clientname: option in mts.conf file, post will give the
1910 HELO command with that name instead. If the argument to the
1911 clientname: option is empty, no HELO command is given.
1912 (From the MH-6.8.4 diff)
1914 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
1916 * When using `-help' for a command, it will also print its
1917 profile compents from .mh_profile. (From MH-6.8.4 diff)
1919 * "slocal -file" will now correctly takes its input from
1920 a file (currently need to specify full path).
1922 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
1924 * "slocal -debug" will now issue a warning if a non-blank
1925 line in the .maildelivery file has less than 5 fields.
1927 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
1929 * Changed slocal so that code for duplicate suppression
1930 (MH config was MSGID) is always built. Added the options
1931 -[no]suppressdup to slocal to turn this on/off.
1933 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
1935 * Released nmh-0.03.
1937 * Fixed problem where mark would core dump if no
1938 .mh_sequence file existed.
1940 * Fixed problem where slocal would core dump if -debug
1941 option was given, and certain headers were missing.
1943 * Added patch to slocal to add `folder' (+) action, which
1944 is shorthand for piping message to rcvstore. Updated
1947 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
1949 * Changed flist option -unseen to -[no]all. Cleaned up
1952 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
1954 * Fixed flist. Changed the profile component `Folder-Order'
1955 to `Flist-Order. Added option `-sequence' to flist, so
1956 you can specify the name of the sequence to search for.
1958 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
1960 * A few minor portability cleanups. Changed to use PATH_MAX
1961 rather than MAXPATHLEN. Don't assume ospeed variable exists
1962 in termsbr.c. Removed some conflicting prototypes.
1964 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
1966 * Add configure test to check if tgetent will accept NULL
1967 and allocate its own buffer. Borrowed from zsh.
1969 * Changed libpath to etcpath.
1971 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
1973 * Cleaned up source code and Makefiles, so that if your `make'
1974 supports the VPATH option, you can build nmh in a different
1975 directory from where the source code is located.
1977 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
1979 * Released nmh-0.02.
1981 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
1983 * Split mhook man page into man pages for rcvdist, rcvpack,
1986 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
1988 * Changed code to use strerror, rather than using sys_errlist
1989 and sys_nerr directly.
1991 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
1993 * -compat switch from install-mh removed.
1995 * Changed the default POP port from "pop" to "pop3".
1997 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
1999 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2000 (again) to mhn.defaults.sh. Changed find_program (again) to
2001 mhn.find.sh. mhn.defaults.sh now takes the search path
2002 as an argument. Default search path is now specified in Makefile
2003 rather than in script.
2005 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2007 * Changed mtstailor file to mts.conf. Updated man pages.
2009 * Changed si_value to si_val in mhn.c, since it conflicts with
2010 macro defined on Solaris.
2012 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2014 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2015 support for Emacs front-end mhe. It is on by default.
2017 * Added the following configure options: --enable-nmh-pop to
2018 enable client side pop support, --enable-nmh-smtp to enable
2019 SMTP support. Client-side pop support now compiles. Man
2020 pages for inc, msgchk, mh-chart now correctly added pop
2023 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2025 * Added configure test for bug in C libraries where linker
2026 can't find ruserpass, but can find _ruserpass.
2028 * Fixed configure test so that termcap variable ospeed is
2031 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2033 * Source files converted to ANSI C.
2035 * md5 now compiled separately rather than being included
2036 in mhn.c. Changed md5 to use memset and memcpy.
2038 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2040 * Collected the error routines adios, advise, admonish, and advertise
2041 into one file (error.c), and did some rearranging of the code.
2043 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2045 * Added awk script sigmsg.awk (originally written by
2046 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2047 automatically generate signal messages for pidstatus.c.
2048 Added files sbr/signals.c, h/signals.h. Code now uses
2049 sigprocmask to block signals (if available). Code now uses
2050 signal blocking on non-BSD machines.
2052 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2054 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2056 * Released nmh-0.01.
2058 * Added configure code to check for type of signals functions
2059 you have (POSIX or BSD style signals). Added function
2060 SIGPROCMASK to simulate sigprocmask on machines that don't
2063 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2065 * Added -version switch to all commands. Also added to
2068 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2070 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2071 POSIX termios.h style functions if present.
2073 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2075 * Changed support/general/bootmhn.sh to output new mhn_defaults
2076 file to standard output by default (makes it easier for testing).
2077 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2078 script to find_program.
2080 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2082 * Added patch to uip/folder.c from exmh distribution to
2083 speed up -recurse option.
2085 * Added flist command from exmh distribution. It doesn't work
2086 yet, but it compiles :-)
2088 * Changed default location for install to
2089 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2090 and configuration files go in nmh/etc, and support binaries go
2091 in nmh/lib. Of course, all this can now be changed in the top
2094 * Started with mh-6.8.3 as based and converted to autoconf.
2095 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2096 Pop support and plenty of other things, are now broken.
projects / nmh / blob