diplodocus.org Git - nmh/blob - configure.in

   1 dnl
   2 dnl configure.in -- autoconf template for nmh
   3 dnl
   4 dnl $Id$
   5 dnl
   6
   7 AC_INIT(h/nmh.h)
   8 AC_CONFIG_HEADER(config.h)
   9
  10 AC_CANONICAL_SYSTEM
  11
  12 dnl ---------------------
  13 dnl define a macro or two
  14 dnl ---------------------
  15
  16 AC_DEFUN(NMH_PROG_GNU_LIBTOOL, [
  17 if test -n "$LIBTOOL" ; then
  18   tmptest=`$LIBTOOL --version 2>&1 | grep GNU`
  19   if test x"$tmptest" != x  ; then
  20     GNU_LIBTOOL=1
  21     AC_SUBST(GNU_LIBTOOL)dnl
  22   fi
  23 fi
  24 ] )
  25
  26
  27 dnl What version of nmh are we building?
  28 VERSION=`sed -e 's/nmh-//' ${srcdir}/VERSION`
  29 echo "configuring for nmh-$VERSION"
  30 AC_SUBST(VERSION)dnl
  31
  32 dnl What date of nmh are we building?
  33 DATE=`cat ${srcdir}/DATE`
  34 echo "configuring for nmh dated $DATE"
  35 AC_SUBST(DATE)dnl
  36
  37 dnl --------------------------
  38 dnl CHECK COMMAND LINE OPTIONS
  39 dnl --------------------------
  40
  41 dnl Do you want client-side support for apop?
  42 AC_ARG_ENABLE(apop,
  43 [  --enable-apop           enable client-side support for POP3 and APOP])
  44 if test x"$enable_apop" = x"yes"; then
  45   AC_DEFINE(APOP)dnl
  46   APOPLIB=md5.o
  47   enable_pop=yes
  48 fi
  49 AC_SUBST(APOPLIB)dnl
  50
  51 dnl Do you want to debug nmh?
  52 AC_ARG_ENABLE(debug,
  53 [  --enable-debug          enable nmh code debugging])
  54 dnl The old redundant --enable-nmh-debug is deprecated and undocumented.
  55 if test x"$enable_nmh_debug" = x"yes"; then
  56   enable_debug=yes
  57 fi
  58
  59 dnl Allow users to send email from addresses other than their default?
  60 AC_ARG_ENABLE(masquerade,
  61   [  --enable-masquerade[='draft_from mmailid username_extension']
  62                           enable up to 3 types of address masquerading [none]],
  63   [if test x"$enable_masquerade" = x"yes"; then
  64     masquerade="draft_from mmailid username_extension"
  65   else
  66     masquerade="$enable_masquerade"
  67   fi])
  68 AC_SUBST(masquerade)dnl
  69
  70 dnl Do you want mhe support?
  71 AC_ARG_ENABLE(mhe,
  72 [  --enable-mhe            enable mhe support (DEFAULT)])
  73
  74 dnl mhe support is on by default, so define it unless --disable-mhe or the
  75 dnl deprecated, undocumented --disable-nmh-mhe are specified.
  76 if test x"$enable_mhe" != x"no" -a x"$enable_nmh_mhe" != x"no"; then
  77   AC_DEFINE(MHE)dnl
  78 fi
  79
  80 dnl Do you want client-side support for pop?
  81 AC_ARG_ENABLE(pop,
  82 [  --enable-pop            enable client-side support for plain POP3])
  83 dnl The old redundant --enable-nmh-pop is deprecated and undocumented.
  84 if test x"$enable_nmh_pop" = x"yes"; then
  85   enable_pop=yes
  86 fi
  87
  88 dnl Do you want client-side support for using SASL for authentication?
  89 dnl Note that this code will be enabled for both POP and SMTP
  90 AC_ARG_WITH(cyrus-sasl,
  91 [  --with-cyrus-sasl=<dir> Specify location of Cyrus SASL library for auth])
  92 if test x"$with_cyrus_sasl" != x -a x"$with_cyrus_sasl" != x"no"; then
  93   AC_DEFINE(CYRUS_SASL)dnl
  94   sasl_support=yes
  95 else
  96   sasl_support=no
  97 fi
  98
  99 dnl What should be the default editor?
 100 AC_ARG_WITH(editor,
 101 [  --with-editor=EDITOR    specify the default editor])
 102
 103 if test -n "$with_editor"; then
 104   editorpath="$with_editor"
 105 fi
 106
 107 dnl Set the backup prefix
 108 AC_ARG_WITH([hash-backup],
 109   [  --with-hash-backup      use # as the backup prefix (default: ,)])
 110 if test x"$with_hash_backup" != x -a x"$with_hash_backup" != x"no"; then
 111   backup_prefix="#"
 112 else
 113   backup_prefix=","
 114 fi
 115 AC_DEFINE_UNQUOTED(BACKUP_PREFIX, "$backup_prefix")dnl
 116
 117 dnl Do you want support for hesiod
 118 AC_ARG_WITH(hesiod,
 119 [  --with-hesiod=PREFIX    specify location of Hesiod])
 120 if test x"$with_hesiod" != x -a x"$with_hesiod" != x"no"; then
 121   AC_DEFINE(HESIOD)dnl
 122 fi
 123
 124 dnl Do you want client-side support for kpop
 125 AC_ARG_WITH(krb4,
 126 [  --with-krb4=PREFIX      specify location of Kerberos V4 for KPOP support])
 127 if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
 128   enable_pop=yes
 129   AC_DEFINE(KPOP)dnl
 130   AC_DEFINE(KPOP_PRINCIPAL, "pop")dnl
 131 fi
 132
 133 dnl After we know if we're including apop and kpop support, do pop stuff
 134 if test x"$enable_pop" = x"yes"; then
 135   AC_DEFINE(POP)dnl
 136   POPLIB=popsbr.o
 137   POPSED='/^%nmhbeginpop%/d;/^%nmhendpop%/d'
 138 else
 139   POPSED='/^%nmhbeginpop%/,/^%nmhendpop%/d'
 140 fi
 141 AC_SUBST(POPLIB)dnl
 142 AC_SUBST(POPSED)dnl
 143
 144 dnl What method of locking to use?
 145 AC_ARG_WITH(locking,
 146 [  --with-locking=LOCKTYPE specify the file locking method
 147                           (one of dot, fcntl, flock, lockf)])
 148
 149 if test x"$with_locking" = x"dot"; then
 150   LOCKTYPE="dot"
 151   AC_DEFINE(DOT_LOCKING)dnl
 152 elif test x"$with_locking" = x"flock"; then
 153   LOCKTYPE="flock"
 154   AC_DEFINE(FLOCK_LOCKING)dnl
 155 elif test x"$with_locking" = x"lockf"; then
 156   LOCKTYPE="lockf"
 157   AC_DEFINE(LOCKF_LOCKING)dnl
 158 elif test x"$with_locking" = x"fcntl"; then
 159   LOCKTYPE="fcntl"
 160   AC_DEFINE(FCNTL_LOCKING)dnl
 161 else
 162   LOCKTYPE="dot"
 163   AC_DEFINE(DOT_LOCKING)dnl
 164 fi
 165
 166 dnl What method of posting should post use?
 167 AC_ARG_WITH(mts,
 168 [  --with-mts=MTS          specify the default mail transport agent/service])
 169
 170 if test x"$with_mts" = x"smtp"; then
 171   MTS="smtp"
 172 elif test x"$with_mts" = x"sendmail"; then
 173   MTS="sendmail"
 174 else
 175   MTS="smtp"
 176 fi
 177 AC_SUBST(MTS)dnl
 178
 179 dnl Both the smtp and sendmail mail transport services use the smtp code
 180 AC_DEFINE(SMTPMTS)dnl
 181
 182 dnl What should be the default pager?
 183 AC_ARG_WITH(pager,
 184 [  --with-pager=PAGER      specify the default pager])
 185
 186 if test -n "$with_pager"; then
 187   pagerpath="$with_pager"
 188 fi
 189
 190 dnl What should be the default mail server(s)?
 191 AC_ARG_WITH(smtpservers,
 192 [  --with-smtpservers='SMTPSERVER1[ SMTPSERVER2...]'
 193                           specify the default SMTP server(s) [localhost]])
 194 if test -n "$with_smtpservers"; then
 195   smtpservers="$with_smtpservers"
 196 else
 197   smtpservers="localhost"
 198 fi
 199 AC_SUBST(smtpservers)dnl
 200
 201 dnl ----------------------------------------------------
 202 dnl Default location is /usr/local/nmh/{bin,etc,lib,man}
 203 dnl ----------------------------------------------------
 204 AC_PREFIX_DEFAULT(/usr/local/nmh)
 205
 206 dnl ------------------
 207 dnl CHECK THE COMPILER
 208 dnl ------------------
 209 dnl We want these before the checks,
 210 dnl so the checks can modify their values.
 211 test -z "$CFLAGS" && CFLAGS= auto_cflags=1
 212 if test x"$enable_debug" = x"yes"; then
 213   test -z "$LDFLAGS" && LDFLAGS=-g
 214 fi
 215
 216 AC_PROG_CC
 217
 218 dnl if the user hasn't specified CFLAGS, then
 219 dnl   if compiler is gcc, then
 220 dnl     use -O2 and some warning flags
 221 dnl   else use -O
 222 if test -n "$auto_cflags"; then
 223   if test x"$enable_debug" = x"yes"; then
 224     if test -n "$GCC"; then
 225       test -z "$CFLAGS" && CFLAGS="-Wall -g" || CFLAGS="$CFLAGS -Wall -g"
 226     else
 227       test -z "$CFLAGS" && CFLAGS=-g || CFLAGS="$CFLAGS -g"
 228     fi
 229   else
 230     if test -z "$LDFLAGS"; then
 231       case "$build_os" in
 232         darwin*)
 233           LDFLAGS=
 234           ;;
 235         *)
 236           LDFLAGS=-s
 237           ;;
 238       esac
 239     fi
 240     if test -n "$GCC"; then
 241       test -z "$CFLAGS" && CFLAGS="-Wall -O2" || CFLAGS="$CFLAGS -Wall -O2"
 242     else
 243       test -z "$CFLAGS" && CFLAGS=-O  || CFLAGS="$CFLAGS -O"
 244     fi
 245   fi
 246 fi
 247
 248 AC_C_CONST              dnl Does compiler support `const'.
 249
 250 dnl ------------------
 251 dnl CHECK FOR PROGRAMS
 252 dnl ------------------
 253 AC_PROG_MAKE_SET        dnl Does make define $MAKE
 254 AC_PROG_INSTALL         dnl Check for BSD compatible `install'
 255 AC_PROG_RANLIB          dnl Check for `ranlib'
 256 AC_PROG_AWK             dnl Check for mawk,gawk,nawk, then awk
 257 AC_PROG_LEX             dnl Check for lex/flex
 258
 259 dnl Look for `cut'
 260 pathtmp=/usr/bin:/bin:/usr/local/bin:/usr/xpg4/bin:/usr/ucb
 261 AC_PATH_PROG(cutpath, cut, no, [$pathtmp])
 262
 263 dnl ----------------------------------------------
 264 dnl check for lclint, and lint if it doesn't exist
 265 dnl ----------------------------------------------
 266 AC_CHECK_PROG(linttmp1, lclint, lclint, no)dnl
 267 if test x$ac_cv_prog_linttmp1 != xno ; then
 268   LINT=$ac_cv_prog_linttmp1
 269   LINTFLAGS="-weak +posixlib -macrovarprefixexclude"
 270 else
 271   AC_CHECK_PROG(linttmp2, lint, lint, no)dnl
 272   if test x$ac_cv_prog_linttmp2 != xno ; then
 273     LINT=$ac_cv_prog_linttmp2
 274     LINTFLAGS=""
 275   else
 276     LINT="echo 'No lint program found'"
 277     LINTFLAGS=""
 278   fi
 279 fi
 280 AC_SUBST(LINT)dnl
 281 AC_SUBST(LINTFLAGS)dnl
 282
 283 dnl try to figure out which one we've got
 284 AC_CHECK_PROG(LIBTOOL, libtool, libtool, , [$pathtmp])
 285 NMH_PROG_GNU_LIBTOOL
 286
 287 dnl Check for lorder and tsort commands
 288 AC_CHECK_PROG(LORDER, lorder, lorder, no)dnl
 289 AC_CHECK_PROG(TSORT, tsort, tsort, no)dnl
 290
 291 dnl If either doesn't exist, replace them with echo and cat
 292 if test x$ac_cv_prog_LORDER != xlorder -o x$ac_cv_prog_TSORT != xtsort; then
 293   LORDER=echo
 294   TSORT=cat
 295   AC_SUBST(LORDER)dnl
 296   AC_SUBST(TSORT)dnl
 297 dnl Mac OS X has lorder, but sh is too broken for it to work
 298 dnl elif test -z "`lorder config/config.c 2>&1 | grep config/config.c`" ; then
 299 dnl   LORDER=echo
 300 dnl   TSORT=cat
 301 dnl   AC_SUBST(LORDER)dnl
 302 dnl   AC_SUBST(TSORT)dnl
 303 fi
 304
 305 dnl Check whether tsort can deal with loops
 306 AC_CACHE_CHECK(whether tsort can deal with loops, nmh_cv_tsort_loop,
 307   [if test -z "`echo a b b a | tsort 2>/dev/null | grep a`" ; then
 308     nmh_cv_tsort_loop=no
 309   else
 310     nmh_cv_tsort_loop=yes
 311   fi])
 312 if test x$nmh_cv_tsort_loop = xno ; then
 313   LORDER=echo
 314   TSORT=cat
 315   AC_SUBST(LORDER)dnl
 316   AC_SUBST(TSORT)dnl
 317 fi
 318
 319 dnl Look for `ls'
 320 pathtmp=/usr/bin:/bin:/usr/local/bin:/usr/xpg4/bin:/usr/ucb
 321 AC_PATH_PROG(lspath, ls, no, [$pathtmp])
 322
 323 dnl See how we get ls to display the owner and the group
 324 if test "$lspath" != "no"; then
 325   AC_CACHE_CHECK(how to get ls to show us the group ownership of a file,
 326                  nmh_cv_ls_grpopt,
 327   [if test x"`$lspath -dl / | $AWK '{print $9}'`" = x"/"; then
 328     dnl There were 9 parameters, so unless this is a really bizarre, nonstandard
 329     dnl ls, it would seem -l gave us both the user and group.  On this type of
 330     dnl ls, -g makes _only_ the group be displayed (and not the user).
 331     nmh_cv_ls_grpopt="-l"
 332   else
 333     dnl Looks like -l only gave us the user, so we need -g to get the group too.
 334     nmh_cv_ls_grpopt="-lg"
 335   fi])
 336 fi
 337
 338 dnl Look for `more'
 339 pathtmp=/usr/bin:/bin:/usr/ucb:/usr/local/bin
 340 AC_PATH_PROG(morepath, more, no, [$pathtmp])
 341
 342 dnl If pager is not specified yet,
 343 dnl then use `more' as the default.
 344 if test -z "$pagerpath"; then
 345   pagerpath="$morepath"
 346 fi
 347 AC_SUBST(pagerpath)dnl
 348
 349 dnl Look for `sendmail'
 350 pathtmp=/usr/lib:/usr/sbin:/usr/etc:/usr/ucblib:/usr/bin:/bin
 351 AC_PATH_PROG(sendmailpath, sendmail, no, [$pathtmp])
 352
 353 dnl Look for `vi'
 354 pathtmp=/usr/bin:/bin:/usr/ucb:/usr/local/bin
 355 AC_PATH_PROG(vipath, vi, no, [$pathtmp])
 356
 357 dnl If editor is not specified yet,
 358 dnl then use `vi' as the default.
 359 if test -z "$editorpath"; then
 360   editorpath="$vipath"
 361 fi
 362 AC_SUBST(editorpath)dnl
 363
 364 dnl Check for broken vi
 365 AC_CACHE_CHECK(for broken vi, nmh_cv_attvibug,
 366 [if echo 'r /nonexist-file
 367 q' | ex > /dev/null 2>&1
 368 then
 369         nmh_cv_attvibug=no
 370 else
 371         nmh_cv_attvibug=yes
 372 fi])
 373
 374 if test "$nmh_cv_attvibug" = yes; then
 375   AC_DEFINE(ATTVIBUG)dnl
 376 fi
 377
 378 dnl ----------------------------------------------------------
 379 dnl FIND MAIL SPOOL AND SEE IF WE NEED TO MAKE inc SETGID MAIL
 380 dnl ----------------------------------------------------------
 381 AC_CACHE_CHECK(where mail spool is located, nmh_cv_mailspool,
 382 [for mailspool in /var/mail        dnl
 383                   /var/spool/mail  dnl
 384                   /usr/spool/mail  dnl
 385                   /dev/null;       dnl Just in case we fall through
 386 do
 387   test -d $mailspool && break
 388 done
 389 nmh_cv_mailspool=$mailspool
 390 ])
 391 mailspool=$nmh_cv_mailspool
 392 AC_SUBST(mailspool)dnl
 393
 394 dnl See whether the mail spool directory is world-writable.
 395 if test "$lspath" != "no" -a "$cutpath" != "no"; then
 396   AC_CACHE_CHECK(whether the mail spool is world-writable,
 397                  nmh_cv_mailspool_world_writable,
 398   [if test "`$lspath -dlL $mailspool | $cutpath -c9`" = "-"; then
 399     nmh_cv_mailspool_world_writable=no
 400   else
 401     nmh_cv_mailspool_world_writable=yes
 402   fi])
 403 fi
 404
 405 dnl Also, check for liblockfile (as found on Debian systems)
 406 AC_CHECK_HEADER(lockfile.h, AC_CHECK_LIB(lockfile, lockfile_create) )
 407
 408 dnl and whether its companion program dotlockfile is setgid
 409 AC_PATH_PROG(dotlockfilepath, dotlockfile, no)
 410 if test "$ac_cv_lib_lockfile_lockfile_create" != "no" ; then
 411   if test "$ac_cv_path_dotlockfilepath" != "no" ; then
 412     AC_CACHE_CHECK(whether dotlockfile is setgid, nmh_cv_dotlockfile_setgid,
 413     [ if test -g "$ac_cv_path_dotlockfilepath" ; then
 414         nmh_cv_dotlockfile_setgid=yes
 415       else
 416         nmh_cv_dotlockfile_setgid=no
 417       fi])
 418   fi
 419 fi
 420
 421 dnl If mailspool is not world-writable and dotlockfile is not setgid,
 422 dnl we need to #define MAILGROUP to 1 and make inc setgid.
 423 if test x"$nmh_cv_mailspool_world_writable" = x"no" -a x"$nmh_cv_dotlockfile_setgid" != x"yes" ; then
 424   dnl do we really need both of these?
 425   AC_DEFINE(MAILGROUP)dnl
 426   SETGID_MAIL=1
 427 fi
 428 AC_SUBST(SETGID_MAIL)dnl
 429
 430 dnl Use ls to see which group owns the mail spool directory.
 431 AC_CACHE_CHECK(what group owns the mail spool, nmh_cv_ls_mail_grp,
 432 [nmh_cv_ls_mail_grp=`$lspath -dL $nmh_cv_ls_grpopt $mailspool|$AWK '{print $4}'`
 433 ])
 434 MAIL_SPOOL_GRP=$nmh_cv_ls_mail_grp
 435 AC_SUBST(MAIL_SPOOL_GRP)dnl
 436
 437 dnl ------------------
 438 dnl CHECK HEADER FILES
 439 dnl ------------------
 440 AC_HEADER_DIRENT
 441 AC_HEADER_STDC
 442 AC_HEADER_TIME
 443 AC_HEADER_SYS_WAIT
 444 AC_HEADER_STAT
 445 AC_CHECK_HEADERS(string.h memory.h stdlib.h unistd.h errno.h fcntl.h \
 446                  limits.h crypt.h termcap.h termio.h termios.h locale.h \
 447                  netdb.h sys/param.h sys/time.h sys/utsname.h arpa/inet.h \
 448                  arpa/ftp.h)
 449
 450
 451 AC_CACHE_CHECK(POSIX termios, nmh_cv_sys_posix_termios,
 452 [AC_TRY_LINK([#include <sys/types.h>
 453 #include <unistd.h>
 454 #include <termios.h>],
 455 [/* SunOS 4.0.3 has termios.h but not the library calls.  */
 456 tcgetattr(0, 0);],
 457   nmh_cv_sys_posix_termios=yes, nmh_cv_sys_posix_termios=no)])
 458
 459 if test $nmh_cv_sys_posix_termios = yes; then
 460   AC_CACHE_CHECK(TIOCGWINSZ in termios.h,
 461   nmh_cv_header_termios_h_tiocgwinsz,
 462   [AC_TRY_LINK([#include <sys/types.h>
 463 #include <termios.h>],
 464   [int x = TIOCGWINSZ;],
 465   nmh_cv_header_termios_h_tiocgwinsz=yes,
 466   nmh_cv_header_termios_h_tiocgwinsz=no)])
 467 else
 468   nmh_cv_header_termios_h_tiocgwinsz=no
 469 fi
 470
 471 if test $nmh_cv_header_termios_h_tiocgwinsz = no; then
 472   AC_CACHE_CHECK(TIOCGWINSZ in sys/ioctl.h,
 473   nmh_cv_header_sys_ioctl_h_tiocgwinsz,
 474   [AC_TRY_LINK([#include <sys/types.h>
 475 #include <sys/ioctl.h>],
 476   [int x = TIOCGWINSZ;],
 477   nmh_cv_header_sys_ioctl_h_tiocgwinsz=yes,
 478   nmh_cv_header_sys_ioctl_h_tiocgwinsz=no)])
 479   if test $nmh_cv_header_sys_ioctl_h_tiocgwinsz = yes; then
 480     AC_DEFINE(GWINSZ_IN_SYS_IOCTL)dnl
 481   fi
 482 fi
 483
 484 dnl
 485 dnl Checks for _IO_write_ptr. A Linuxism used by nmh on linux. We
 486 dnl really use a whole set of them, but this check should be
 487 dnl sufficient.
 488 dnl
 489 AC_CHECK_HEADER(libio.h, [
 490   AC_EGREP_HEADER(_IO_write_ptr, libio.h, [
 491     AC_DEFINE(LINUX_STDIO) ]) ])
 492
 493 AC_CHECK_HEADER([sys/ptem.h], AC_DEFINE(WINSIZE_IN_PTEM))
 494
 495 dnl ---------------
 496 dnl CHECK FUNCTIONS
 497 dnl ---------------
 498 AC_FUNC_VFORK
 499 AC_CHECK_LIB(mkstemp,mkstemp)
 500 AC_CHECK_FUNCS(waitpid wait3 sigaction sigprocmask sigblock sigsetmask \
 501                sighold sigrelse writev lstat uname tzset killpg mkstemp \
 502                sethostent getutent)
 503
 504 dnl solaris screws this up
 505 AC_CHECK_FUNC(gethostbyname, [AC_DEFINE(HAVE_GETHOSTBYNAME)],
 506   AC_CHECK_LIB(nsl, gethostbyname, [AC_DEFINE(HAVE_GETHOSTBYNAME)] ) )
 507
 508 dnl sigsetjmp may be a macro
 509 AC_MSG_CHECKING(for sigsetjmp)
 510 AC_TRY_LINK([#include <setjmp.h>], [sigsetjmp((void *)0, 0);],
 511         [AC_DEFINE(HAVE_SIGSETJMP) AC_MSG_RESULT(yes)], AC_MSG_RESULT(no))
 512
 513 AC_REPLACE_FUNCS(snprintf strerror strdup)
 514
 515 dnl Look for the initgroups() declaration.  On AIX 4.[13], Solaris 4.1.3, and
 516 dnl ULTRIX 4.2A the function is defined in libc but there's no declaration in
 517 dnl any system header.
 518 dnl
 519 dnl On Solaris 2.[456], the declaration is in <grp.h>.  On HP-UX 9-11 and
 520 dnl (reportedly) FreeBSD 3.[23], it's in <unistd.h>.  Any other locations we
 521 dnl need to check?
 522 AC_EGREP_HEADER(initgroups, grp.h, AC_DEFINE(INITGROUPS_HEADER, <grp.h>),
 523                 AC_EGREP_HEADER(initgroups, unistd.h,
 524                                 AC_DEFINE(INITGROUPS_HEADER, <unistd.h>)))
 525
 526 dnl On AIX 4.1, snprintf() is defined in libc.a but there's no prototype in
 527 dnl <stdio.h> or elsewhere.  Apparently it's not officially supported (though it
 528 dnl seems to work perfectly and IBM apparently uses it in internal code).
 529 dnl Anyhow, if we omit our own snprintf() and vsnprintf() prototypes when we
 530 dnl HAVE_SNPRINTF, we get a billion warnings at compile time.  Use the C
 531 dnl preprocessor to preprocess stdio.h and make sure that there's actually a
 532 dnl prototype.
 533 AC_EGREP_HEADER(snprintf, stdio.h, AC_DEFINE(HAVE_SNPRINTF_PROTOTYPE))
 534
 535 dnl -------------------
 536 dnl CHECK FOR LIBRARIES
 537 dnl -------------------
 538 dnl Check location of modf
 539 AC_CHECK_FUNC(modf, , AC_CHECK_LIB(m, modf))
 540
 541 dnl Checks for network libraries (nsl, socket)
 542 AC_CHECK_NETLIBS
 543
 544 termcap_curses_order="termcap curses ncurses"
 545 for lib in $termcap_curses_order; do
 546   AC_CHECK_LIB(${lib}, tgetent, [TERMLIB="-l$lib"; break])
 547 done
 548 AC_SUBST(TERMLIB)dnl
 549
 550 dnl --------------
 551 dnl CHECK FOR NDBM
 552 dnl --------------
 553 dnl Checks for ndbm
 554 AC_CHECK_FUNC(dbm_open, ,
 555   AC_CHECK_LIB(ndbm, dbm_open, ,
 556     AC_CHECK_LIB(dbm, dbm_open)))
 557
 558 dnl ----------------
 559 dnl CHECK FOR NDBM.H
 560 dnl ----------------
 561 AC_CHECK_HEADERS(db1/ndbm.h)
 562
 563 dnl ----------------
 564 dnl CHECK FOR HESIOD
 565 dnl ----------------
 566 if test x"$with_hesiod" != x -a x"$with_hesiod" != x"no"; then
 567   if test x"$with_hesiod" != x"yes"; then
 568     HESIOD_INCLUDES="-I$with_hesiod/include"
 569     HESIOD_LIBS="-L$with_hesiod/lib"
 570   fi
 571   AC_CHECK_FUNC(res_send,
 572         [AC_CHECK_LIB(hesiod, hes_resolve,
 573                 [HESIOD_LIBS="$HESIOD_LIBS -lhesiod"],
 574                 [AC_MSG_ERROR(Hesiod library not found)],
 575                 $HESIOD_LIBS)],
 576         [AC_CHECK_LIB(hesiod, hes_resolve,
 577                 [HESIOD_LIBS="$HESIOD_LIBS -lhesiod -lresolv"],
 578                 [AC_MSG_ERROR(Hesiod library not found)],
 579                 $HESIOD_LIBS -lresolv)])
 580
 581 fi
 582 AC_SUBST(HESIOD_INCLUDES)dnl
 583 AC_SUBST(HESIOD_LIBS)dnl
 584
 585 dnl ----------------------------------
 586 dnl CHECK FOR KRB4 (Kerberos4 support)
 587 dnl ----------------------------------
 588 if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
 589   if test x"$with_krb4" != x"yes"; then
 590     KRB4_INCLUDES="-I$with_krb4/include"
 591     if test -d "$with_krb4/include/kerberosIV"; then
 592       KRB4_INCLUDES="$KRB4_INCLUDES -I$with_krb4/include/kerberosIV"
 593     fi
 594     KRB4_LIBS="-L$with_krb4/lib"
 595   elif test -d /usr/include/kerberosIV; then
 596     KRB4_INCLUDES="-I/usr/include/kerberosIV"
 597   fi
 598 dnl First, check if we have -lk5crypto, since that means we have a recent krb5
 599
 600   AC_CHECK_LIB(k5crypto, krb5_encrypt,
 601         [AC_CHECK_LIB(krb4, krb_rd_req,
 602                 [KRB4_LIBS="$KRB4_LIBS -lkrb4 -ldes425 -lkrb5 -lk5crypto -lcom_err"],
 603                 [AC_MSG_ERROR(Kerberos 4 compatibility libraries not found)],
 604                 $KRB4_LIBS -ldes425 -lkrb5 -lk5crypto -lcom_err)],
 605
 606         [AC_CHECK_LIB(krb4, krb_rd_req,
 607             [KRB4_LIBS="$KRB4_LIBS -lkrb4 -ldes425 -lkrb5 -lcrypto -lcom_err"],
 608             [AC_CHECK_LIB(krb, krb_rd_req,
 609               [KRB4_LIBS="$KRB4_LIBS -lkrb -ldes"],
 610               [AC_MSG_ERROR(Kerberos 4 libraries not found)],
 611               $KRB4_LIBS -ldes)],
 612             $KRB4_LIBS -ldes425 -lkrb5 -lcrypto -lcom_err)],
 613         $KRB4_LIBS)
 614
 615 fi
 616 AC_SUBST(KRB4_INCLUDES)dnl
 617 AC_SUBST(KRB4_LIBS)dnl
 618
 619 dnl --------------------
 620 dnl CHECK FOR CYRUS SASL
 621 dnl --------------------
 622 if test x"$with_cyrus_sasl" != x -a x"$with_cyrus_sasl" != x"no"; then
 623   if test x"$with_cyrus_sasl" != x"yes"; then
 624     SASL_INCLUDES="-I$with_cyrus_sasl/include"
 625     SASL_LIBS="-L$with_cyrus_sasl/lib"
 626
 627     dnl Do OS-specific hardcoding of SASL shared library path into executables,
 628     dnl so user isn't forced to set environment variables like Solaris'
 629     dnl LD_LIBRARY_PATH.
 630     case "$target_os" in
 631       solaris*)
 632         SASL_LIBS="$SASL_LIBS -R$with_cyrus_sasl/lib"
 633         ;;
 634     esac
 635   fi
 636   save_LDFLAGS="$LDFLAGS"
 637   LDFLAGS="$LDFLAGS $SASL_LIBS"
 638   AC_CHECK_LIB(sasl, sasl_client_new,
 639     [SASL_LIBS="$SASL_LIBS -lsasl"],
 640     [AC_MSG_ERROR(Cyrus SASL library not found)])
 641   LDFLAGS="$save_LDFLAGS"
 642 fi
 643 AC_SUBST(SASL_INCLUDES)dnl
 644 AC_SUBST(SASL_LIBS)dnl
 645
 646 dnl ---------------------
 647 dnl CHECK TERMCAP LIBRARY
 648 dnl ---------------------
 649
 650 dnl Add the termcap library, so that the following configure
 651 dnl tests will find it when it tries to link test programs.
 652 nmh_save_LIBS="$LIBS"
 653 LIBS="$TERMLIB $LIBS"
 654
 655 dnl Checks for external variable ospeed in the termcap library.
 656 AC_CACHE_CHECK(if an include file defines ospeed,
 657 nmh_cv_decl_ospeed_include_defines,
 658 [AC_TRY_LINK(
 659 [#include <sys/types.h>
 660 #if HAVE_TERMIOS_H
 661 #include <termios.h>
 662 #endif
 663 #if HAVE_TERMCAP_H
 664 #include <termcap.h>
 665 #endif], [ospeed = 0;],
 666 nmh_cv_decl_ospeed_include_defines=yes,
 667 nmh_cv_decl_ospeed_include_defines=no)])
 668
 669 if test $nmh_cv_decl_ospeed_include_defines = no; then
 670   AC_CACHE_CHECK(if you must define ospeed,
 671   nmh_cv_decl_ospeed_must_define,
 672   [AC_TRY_LINK( ,[extern short ospeed; ospeed = 0;],
 673   nmh_cv_decl_ospeed_must_define=yes,
 674   nmh_cv_decl_ospeed_must_define=no)])
 675 fi
 676
 677 if test $nmh_cv_decl_ospeed_include_defines = yes; then
 678   AC_DEFINE(HAVE_OSPEED)dnl
 679 elif test $nmh_cv_decl_ospeed_must_define = yes; then
 680   AC_DEFINE(HAVE_OSPEED)
 681   AC_DEFINE(MUST_DEFINE_OSPEED)
 682 fi
 683
 684 dnl dnl Checks if tgetent accepts NULL and will
 685 dnl dnl allocate its own termcap buffer.
 686 dnl AC_CACHE_CHECK(if tgetent accepts NULL,
 687 dnl nmh_cv_func_tgetent_accepts_null,
 688 dnl [AC_TRY_RUN([main(){int i = tgetent((char*)0,"vt100");exit(!i || i == -1);}],
 689 dnl   nmh_cv_func_tgetent_accepts_null=yes,
 690 dnl   nmh_cv_func_tgetent_accepts_null=no,
 691 dnl   nmh_cv_func_tgetent_accepts_null=no)])
 692 dnl if test $nmh_cv_func_tgetent_accepts_null = yes; then
 693 dnl   AC_DEFINE(TGETENT_ACCEPTS_NULL)
 694 dnl fi
 695
 696 dnl Now put the libraries back to what it was before we
 697 dnl starting checking the termcap library.
 698 LIBS="$nmh_save_LIBS"
 699
 700 dnl --------------
 701 dnl CHECK TYPEDEFS
 702 dnl --------------
 703 AC_TYPE_SIGNAL
 704 AC_TYPE_PID_T
 705 AC_TYPE_OFF_T
 706 AC_TYPE_UID_T
 707 AC_TYPE_MODE_T
 708 AC_TYPE_SIZE_T
 709
 710 dnl Check for sigset_t.  Currently I'm looking in
 711 dnl <sys/types.h> and <signal.h>.  Others might need
 712 dnl to be added.
 713 AC_CACHE_CHECK(for sigset_t, nmh_cv_type_sigset_t,
 714 [AC_TRY_COMPILE(
 715 [#include <sys/types.h>
 716 #include <signal.h>], [sigset_t tempsigset;],
 717   nmh_cv_type_sigset_t=yes, nmh_cv_type_sigset_t=no)])
 718 if test $nmh_cv_type_sigset_t = no; then
 719   AC_DEFINE(sigset_t, unsigned int)
 720 fi
 721
 722 dnl ----------------
 723 dnl CHECK STRUCTURES
 724 dnl ----------------
 725 AC_STRUCT_ST_BLKSIZE
 726
 727 AC_CACHE_CHECK(for tm_gmtoff in struct tm, nmh_cv_struct_tm_gmtoff,
 728 [AC_TRY_COMPILE(
 729 [#ifdef TIME_WITH_SYS_TIME
 730 # include <sys/time.h>
 731 # include <time.h>
 732 #else
 733 # ifdef TM_IN_SYS_TIME
 734 #  include <sys/time.h>
 735 # else
 736 #  include <time.h>
 737 # endif
 738 #endif],
 739 [struct tm temptm; temptm.tm_gmtoff = 0;],
 740   nmh_cv_struct_tm_gmtoff=yes, nmh_cv_struct_tm_gmtoff=no)])
 741 if test $nmh_cv_struct_tm_gmtoff = yes; then
 742   AC_DEFINE(HAVE_TM_GMTOFF)
 743 fi
 744
 745 dnl -------------
 746 dnl CHECK SIGNALS
 747 dnl -------------
 748 dnl What style of signal do you have (POSIX, BSD, or SYSV)?
 749 AC_MSG_CHECKING(what style of signals to use)
 750 if test $ac_cv_func_sigaction = yes -a $ac_cv_func_sigprocmask = yes; then
 751   signals_style=POSIX_SIGNALS
 752   AC_DEFINE(POSIX_SIGNALS)
 753   AC_DEFINE(RELIABLE_SIGNALS)
 754 elif test $ac_cv_func_sigblock = yes -a $ac_cv_func_sigsetmask = yes; then
 755   signals_style=BSD_SIGNALS
 756   AC_DEFINE(BSD_SIGNALS)
 757   AC_DEFINE(RELIABLE_SIGNALS)
 758 elif test $ac_cv_func_sighold = yes -a $ac_cv_func_sigrelse = yes; then
 759   signals_style=SYSV_SIGNALS
 760   AC_DEFINE(SYSV_SIGNALS)
 761 else
 762   signals_style=NO_SIGNAL_BLOCKING
 763   AC_DEFINE(NO_SIGNAL_BLOCKING)
 764 fi
 765
 766 AC_MSG_RESULT($signals_style)
 767
 768 dnl Where is <signal.h> located?  Needed as input for signames.awk
 769 AC_CACHE_CHECK(where signal.h is located, nmh_cv_path_signal_h,
 770 [for SIGNAL_H in /usr/include/bsd/sys/signal.h  dnl Next
 771                  /usr/include/asm/signal.h      dnl Linux 1.3.0 and above
 772                  /usr/include/asm/signum.h      dnl some versions of Linux/Alpha
 773                  /usr/include/linux/signal.h    dnl Linux up to 1.2.11
 774                  /usr/include/sys/signal.h      dnl Almost everybody else
 775                  /dev/null;                     dnl Just in case we fall through
 776 do
 777   test -f $SIGNAL_H && \
 778   grep '#[      ]*define[       ][      ]*SIG[0-9A-Z]*[         ]*[0-9][0-9]*' $SIGNAL_H > /dev/null && \
 779   break
 780 done
 781 nmh_cv_path_signal_h=$SIGNAL_H
 782 ])
 783 SIGNAL_H=$nmh_cv_path_signal_h
 784 AC_SUBST(SIGNAL_H)dnl
 785
 786 dnl ----------------
 787 dnl OS SPECIFIC DEFINES
 788 dnl ----------------
 789 case "$target_os" in
 790
 791   solaris2*)
 792     AC_DEFINE(SYS5)
 793     AC_DEFINE(SVR4)
 794     ;;
 795   irix*)
 796     AC_DEFINE(SYS5)
 797     AC_DEFINE(SVR4)
 798     ;;
 799   osf*)
 800     AC_DEFINE(SYS5)
 801     AC_DEFINE(SVR4)
 802     ;;
 803   aix*)
 804     AC_DEFINE(SYS5)
 805     AC_DEFINE(SVR4)
 806     ;;
 807   sunos4*)
 808     AC_DEFINE(BSD42)
 809     ;;
 810   freebsd*)
 811     AC_DEFINE(BSD42)
 812     AC_DEFINE(BSD44)
 813     ;;
 814   netbsd*)
 815     AC_DEFINE(BSD42)
 816     AC_DEFINE(BSD44)
 817     ;;
 818   openbsd*)
 819     AC_DEFINE(BSD42)
 820     AC_DEFINE(BSD44)
 821     ;;
 822   bsd/os*)
 823     AC_DEFINE(BSD42)
 824     AC_DEFINE(BSD44)
 825     ;;
 826   sco5*)
 827     AC_DEFINE(SYS5)
 828     AC_DEFINE(SCO_5_STDIO)
 829     ;;
 830 esac
 831
 832
 833 dnl ----------------
 834 dnl OUTPUT MAKEFILES
 835 dnl ----------------
 836 AC_OUTPUT(Makefile config/Makefile h/Makefile sbr/Makefile uip/Makefile \
 837           mts/Makefile mts/smtp/Makefile \
 838           etc/Makefile docs/Makefile man/Makefile, \
 839           [test -z "$CONFIG_HEADERS" || echo > stamp-h])
 840
 841 dnl Umm, what's the point of these assignments??  -- <dan-nmh@dilvish.speed.net>
 842 eval "nmhbin=${bindir}";         eval "nmhbin2=${nmhbin}"
 843 eval "nmhsysconf=${sysconfdir}"; eval "nmhsysconf2=${nmhsysconf}"
 844 eval "nmhlib=${libdir}";         eval "nmhlib2=${nmhlib}"
 845 eval "nmhman=${mandir}"
 846
 847 pop_kinds=no
 848 if test x"$enable_pop" = x"yes"; then
 849   pop_kinds="yes ("
 850
 851   if test x"$enable_apop" = x"yes"; then
 852     pop_kinds="${pop_kinds}APOP "
 853   fi
 854
 855   if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
 856     pop_kinds="${pop_kinds}KPOP "
 857   fi
 858
 859   pop_kinds="${pop_kinds}POP3)"
 860 fi
 861
 862 echo "
 863 nmh configuration
 864 -----------------
 865 nmh version                : ${VERSION}
 866 target os                  : ${target}
 867 compiler                   : ${CC}
 868 compiler flags             : ${CFLAGS}
 869 linker flags               : ${LDFLAGS}
 870 source code location       : ${srcdir}
 871 binary install path        : ${nmhbin2}
 872 libary install path        : ${nmhlib2}
 873 config files install path  : ${nmhsysconf2}
 874 man page install path      : ${nmhman}
 875 backup prefix              : ${backup_prefix}
 876 transport system           : ${MTS}
 877 file locking type          : ${LOCKTYPE}
 878 default smtp servers       : ${smtpservers}
 879 default editor             : ${editorpath}
 880 default pager              : ${pagerpath}
 881 email address masquerading : ${masquerade}
 882 pop is enabled             : ${pop_kinds}
 883 SASL support               : ${sasl_support}"
 884 echo ""